* [PATCH 1/2] media: dt-bindings: media: fsl-pxp: add missing imx6sll
2019-12-02 20:47 [PATCH 0/2] ARM: dts: imx: pxp for imx6sll Andreas Kemnade
@ 2019-12-02 20:47 ` Andreas Kemnade
2019-12-13 23:39 ` Rob Herring
2019-12-23 1:24 ` Shawn Guo
2019-12-02 20:47 ` [PATCH 2/2] ARM: dts: imx6sll: add PXP module Andreas Kemnade
1 sibling, 2 replies; 5+ messages in thread
From: Andreas Kemnade @ 2019-12-02 20:47 UTC (permalink / raw)
To: mchehab, robh+dt, mark.rutland, shawnguo, s.hauer, kernel,
festevam, linux-imx, linux-media, devicetree, linux-kernel,
linux-arm-kernel, letux-kernel
Cc: Andreas Kemnade
i.MX6SLL also has a pxp, so mention it among others in the bindings doc.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
Documentation/devicetree/bindings/media/fsl-pxp.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/media/fsl-pxp.txt b/Documentation/devicetree/bindings/media/fsl-pxp.txt
index 2477e7f87381..f8090e06530d 100644
--- a/Documentation/devicetree/bindings/media/fsl-pxp.txt
+++ b/Documentation/devicetree/bindings/media/fsl-pxp.txt
@@ -8,7 +8,7 @@ i.MX SoCs from i.MX23 to i.MX7.
Required properties:
- compatible: should be "fsl,<soc>-pxp", where SoC can be one of imx23, imx28,
- imx6dl, imx6sl, imx6ul, imx6sx, imx6ull, or imx7d.
+ imx6dl, imx6sl, imx6sll, imx6ul, imx6sx, imx6ull, or imx7d.
- reg: the register base and size for the device registers
- interrupts: the PXP interrupt, two interrupts for imx6ull and imx7d.
- clock-names: should be "axi"
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] ARM: dts: imx6sll: add PXP module
2019-12-02 20:47 [PATCH 0/2] ARM: dts: imx: pxp for imx6sll Andreas Kemnade
2019-12-02 20:47 ` [PATCH 1/2] media: dt-bindings: media: fsl-pxp: add missing imx6sll Andreas Kemnade
@ 2019-12-02 20:47 ` Andreas Kemnade
1 sibling, 0 replies; 5+ messages in thread
From: Andreas Kemnade @ 2019-12-02 20:47 UTC (permalink / raw)
To: mchehab, robh+dt, mark.rutland, shawnguo, s.hauer, kernel,
festevam, linux-imx, linux-media, devicetree, linux-kernel,
linux-arm-kernel, letux-kernel
Cc: Andreas Kemnade
While the EPDC is optional, both consumer and industrial editions
have the PXP module, so adding it to the corresponding .dtsi
Information taken from freescale kernel, compared with the
reference manual and tested by a separate program.
Since it does not depend on external wiring, the
status = "disabled" is left out here.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
arch/arm/boot/dts/imx6sll.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 13c7ba7fa6bc..10cf5f3b4865 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -632,6 +632,15 @@
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
};
+ pxp: pxp@20f0000 {
+ compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp";
+ reg = <0x20f0000 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_PXP>;
+ clock-names = "axi";
+ };
+
lcdif: lcd-controller@20f8000 {
compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
reg = <0x020f8000 0x4000>;
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread