From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.cs.columbia.edu, linux-kernel@vger.kernel.org
Cc: Eric Auger <eric.auger@redhat.com>,
James Morse <james.morse@arm.com>,
Julien Thierry <julien.thierry.kdev@gmail.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Thomas Gleixner <tglx@linutronix.de>,
Jason Cooper <jason@lakedaemon.net>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Andrew Murray <Andrew.Murray@arm.com>,
Zenghui Yu <yuzenghui@huawei.com>,
Robert Richter <rrichter@marvell.com>
Subject: [PATCH v3 12/32] irqchip/gic-v4.1: Add VPE eviction callback
Date: Tue, 24 Dec 2019 11:10:35 +0000 [thread overview]
Message-ID: <20191224111055.11836-13-maz@kernel.org> (raw)
In-Reply-To: <20191224111055.11836-1-maz@kernel.org>
When descheduling a VPE, special care must be taken to tell the GIC
about whether we want to receive a doorbell or not. This is a
major improvement on GICv4.0, where the doorbell had to be separately
enabled/disabled.
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
drivers/irqchip/irq-gic-v3-its.c | 53 +++++++++++++++++++++++++-------
1 file changed, 42 insertions(+), 11 deletions(-)
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 49850297fe56..a5567d099a3e 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -2631,7 +2631,7 @@ static int __init allocate_lpi_tables(void)
return 0;
}
-static u64 its_clear_vpend_valid(void __iomem *vlpi_base)
+static u64 its_clear_vpend_valid(void __iomem *vlpi_base, u64 clr, u64 set)
{
u32 count = 1000000; /* 1s! */
bool clean;
@@ -2639,6 +2639,8 @@ static u64 its_clear_vpend_valid(void __iomem *vlpi_base)
val = gits_read_vpendbaser(vlpi_base + GICR_VPENDBASER);
val &= ~GICR_VPENDBASER_Valid;
+ val &= ~clr;
+ val |= set;
gits_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
do {
@@ -2651,6 +2653,11 @@ static u64 its_clear_vpend_valid(void __iomem *vlpi_base)
}
} while (!clean && count);
+ if (unlikely(val & GICR_VPENDBASER_Dirty)) {
+ pr_err_ratelimited("ITS virtual pending table not cleaning\n");
+ val |= GICR_VPENDBASER_PendingLast;
+ }
+
return val;
}
@@ -2759,7 +2766,7 @@ static void its_cpu_init_lpis(void)
* ancient programming gets left in and has possibility of
* corrupting memory.
*/
- val = its_clear_vpend_valid(vlpi_base);
+ val = its_clear_vpend_valid(vlpi_base, 0, 0);
WARN_ON(val & GICR_VPENDBASER_Dirty);
}
@@ -3439,16 +3446,10 @@ static void its_vpe_deschedule(struct its_vpe *vpe)
void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
u64 val;
- val = its_clear_vpend_valid(vlpi_base);
+ val = its_clear_vpend_valid(vlpi_base, 0, 0);
- if (unlikely(val & GICR_VPENDBASER_Dirty)) {
- pr_err_ratelimited("ITS virtual pending table not cleaning\n");
- vpe->idai = false;
- vpe->pending_last = true;
- } else {
- vpe->idai = !!(val & GICR_VPENDBASER_IDAI);
- vpe->pending_last = !!(val & GICR_VPENDBASER_PendingLast);
- }
+ vpe->idai = !!(val & GICR_VPENDBASER_IDAI);
+ vpe->pending_last = !!(val & GICR_VPENDBASER_PendingLast);
}
static void its_vpe_invall(struct its_vpe *vpe)
@@ -3640,6 +3641,35 @@ static void its_vpe_4_1_schedule(struct its_vpe *vpe,
gits_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
}
+static void its_vpe_4_1_deschedule(struct its_vpe *vpe,
+ struct its_cmd_info *info)
+{
+ void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
+ u64 val;
+
+ if (info->req_db) {
+ /*
+ * vPE is going to block: make the vPE non-resident with
+ * PendingLast clear and DB set. The GIC guarantees that if
+ * we read-back PendingLast clear, then a doorbell will be
+ * delivered when an interrupt comes.
+ */
+ val = its_clear_vpend_valid(vlpi_base,
+ GICR_VPENDBASER_PendingLast,
+ GICR_VPENDBASER_4_1_DB);
+ vpe->pending_last = !!(val & GICR_VPENDBASER_PendingLast);
+ } else {
+ /*
+ * We're not blocking, so just make the vPE non-resident
+ * with PendingLast set, indicating that we'll be back.
+ */
+ val = its_clear_vpend_valid(vlpi_base,
+ 0,
+ GICR_VPENDBASER_PendingLast);
+ vpe->pending_last = true;
+ }
+}
+
static int its_vpe_4_1_set_vcpu_affinity(struct irq_data *d, void *vcpu_info)
{
struct its_vpe *vpe = irq_data_get_irq_chip_data(d);
@@ -3651,6 +3681,7 @@ static int its_vpe_4_1_set_vcpu_affinity(struct irq_data *d, void *vcpu_info)
return 0;
case DESCHEDULE_VPE:
+ its_vpe_4_1_deschedule(vpe, info);
return 0;
case INVALL_VPE:
--
2.20.1
next prev parent reply other threads:[~2019-12-24 11:41 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-24 11:10 [PATCH v3 00/32] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 01/32] irqchip/gic-v3: Detect GICv4.1 supporting RVPEID Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 02/32] irqchip/gic-v3: Add GICv4.1 VPEID size discovery Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 03/32] irqchip/gic-v3: Workaround Cavium TX1 erratum when reading GICD_TYPER2 Marc Zyngier
2020-03-09 22:11 ` Robert Richter
2020-03-10 11:41 ` Marc Zyngier
2020-03-10 12:34 ` Robert Richter
2020-03-11 8:45 ` Robert Richter
2020-03-11 9:03 ` Marc Zyngier
2020-03-11 9:18 ` Robert Richter
2019-12-24 11:10 ` [PATCH v3 04/32] irqchip/gic-v3: Use SGIs without active state if offered Marc Zyngier
2019-12-28 8:56 ` Zenghui Yu
2019-12-28 10:36 ` Marc Zyngier
2019-12-30 3:50 ` Zenghui Yu
2019-12-24 11:10 ` [PATCH v3 05/32] irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation Marc Zyngier
2020-01-20 14:03 ` Zenghui Yu
2020-01-20 15:11 ` Marc Zyngier
2020-01-22 2:59 ` Zenghui Yu
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 06/32] irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 07/32] irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 08/32] irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 09/32] irqchip/gic-v4.1: Plumb skeletal VPE irqchip Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 10/32] irqchip/gic-v4.1: Add mask/unmask doorbell callbacks Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 11/32] irqchip/gic-v4.1: Add VPE residency callback Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` Marc Zyngier [this message]
2020-01-24 19:11 ` [tip: irq/core] irqchip/gic-v4.1: Add VPE eviction callback tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 13/32] irqchip/gic-v4.1: Add VPE INVALL callback Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 14/32] irqchip/gic-v4.1: Suppress per-VLPI doorbell Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 15/32] irqchip/gic-v4.1: Allow direct invalidation of VLPIs Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 16/32] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 17/32] irqchip/gic-v4.1: Map the ITS SGIR register page Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 18/32] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 19/32] irqchip/gic-v4.1: Add initial SGI configuration Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 20/32] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 21/32] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 22/32] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 23/32] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 24/32] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 25/32] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 26/32] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 27/32] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 28/32] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2019-12-28 9:19 ` Zenghui Yu
2019-12-28 10:41 ` Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 29/32] KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts Marc Zyngier
2020-01-15 2:49 ` Shaokun Zhang
2020-01-15 3:49 ` Zenghui Yu
2020-01-15 13:32 ` Marc Zyngier
2020-01-15 13:49 ` Zenghui Yu
2020-01-16 6:13 ` Shaokun Zhang
2020-01-15 13:17 ` Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 30/32] KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 31/32] KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disable Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 32/32] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191224111055.11836-13-maz@kernel.org \
--to=maz@kernel.org \
--cc=Andrew.Murray@arm.com \
--cc=eric.auger@redhat.com \
--cc=james.morse@arm.com \
--cc=jason@lakedaemon.net \
--cc=julien.thierry.kdev@gmail.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=rrichter@marvell.com \
--cc=suzuki.poulose@arm.com \
--cc=tglx@linutronix.de \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox