From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.cs.columbia.edu, linux-kernel@vger.kernel.org
Cc: Eric Auger <eric.auger@redhat.com>,
James Morse <james.morse@arm.com>,
Julien Thierry <julien.thierry.kdev@gmail.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Thomas Gleixner <tglx@linutronix.de>,
Jason Cooper <jason@lakedaemon.net>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Andrew Murray <Andrew.Murray@arm.com>,
Zenghui Yu <yuzenghui@huawei.com>,
Robert Richter <rrichter@marvell.com>
Subject: [PATCH v3 17/32] irqchip/gic-v4.1: Map the ITS SGIR register page
Date: Tue, 24 Dec 2019 11:10:40 +0000 [thread overview]
Message-ID: <20191224111055.11836-18-maz@kernel.org> (raw)
In-Reply-To: <20191224111055.11836-1-maz@kernel.org>
One of the new features of GICv4.1 is to allow virtual SGIs to be
directly signaled to a VPE. For that, the ITS has grown a new
64kB page containing only a single register that is used to
signal a SGI to a given VPE.
Add a second mapping covering this new 64kB range, and take this
opportunity to limit the original mapping to 64kB, which is enough
to cover the span of the ITS registers.
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
drivers/irqchip/irq-gic-v3-its.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 48d7ee443544..2f94fae67dfd 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -97,6 +97,7 @@ struct its_node {
struct mutex dev_alloc_lock;
struct list_head entry;
void __iomem *base;
+ void __iomem *sgir_base;
phys_addr_t phys_base;
struct its_cmd_block *cmd_base;
struct its_cmd_block *cmd_write;
@@ -4325,7 +4326,7 @@ static int __init its_probe_one(struct resource *res,
struct page *page;
int err;
- its_base = ioremap(res->start, resource_size(res));
+ its_base = ioremap(res->start, SZ_64K);
if (!its_base) {
pr_warn("ITS@%pa: Unable to map ITS registers\n", &res->start);
return -ENOMEM;
@@ -4376,6 +4377,13 @@ static int __init its_probe_one(struct resource *res,
if (is_v4_1(its)) {
u32 svpet = FIELD_GET(GITS_TYPER_SVPET, typer);
+
+ its->sgir_base = ioremap(res->start + SZ_128K, SZ_64K);
+ if (!its->sgir_base) {
+ err = -ENOMEM;
+ goto out_free_its;
+ }
+
its->mpidr = readl_relaxed(its_base + GITS_MPIDR);
pr_info("ITS@%pa: Using GICv4.1 mode %08x %08x\n",
@@ -4389,7 +4397,7 @@ static int __init its_probe_one(struct resource *res,
get_order(ITS_CMD_QUEUE_SZ));
if (!page) {
err = -ENOMEM;
- goto out_free_its;
+ goto out_unmap_sgir;
}
its->cmd_base = (void *)page_address(page);
its->cmd_write = its->cmd_base;
@@ -4456,6 +4464,9 @@ static int __init its_probe_one(struct resource *res,
its_free_tables(its);
out_free_cmd:
free_pages((unsigned long)its->cmd_base, get_order(ITS_CMD_QUEUE_SZ));
+out_unmap_sgir:
+ if (its->sgir_base)
+ iounmap(its->sgir_base);
out_free_its:
kfree(its);
out_unmap:
--
2.20.1
next prev parent reply other threads:[~2019-12-24 11:42 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-24 11:10 [PATCH v3 00/32] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 01/32] irqchip/gic-v3: Detect GICv4.1 supporting RVPEID Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 02/32] irqchip/gic-v3: Add GICv4.1 VPEID size discovery Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 03/32] irqchip/gic-v3: Workaround Cavium TX1 erratum when reading GICD_TYPER2 Marc Zyngier
2020-03-09 22:11 ` Robert Richter
2020-03-10 11:41 ` Marc Zyngier
2020-03-10 12:34 ` Robert Richter
2020-03-11 8:45 ` Robert Richter
2020-03-11 9:03 ` Marc Zyngier
2020-03-11 9:18 ` Robert Richter
2019-12-24 11:10 ` [PATCH v3 04/32] irqchip/gic-v3: Use SGIs without active state if offered Marc Zyngier
2019-12-28 8:56 ` Zenghui Yu
2019-12-28 10:36 ` Marc Zyngier
2019-12-30 3:50 ` Zenghui Yu
2019-12-24 11:10 ` [PATCH v3 05/32] irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation Marc Zyngier
2020-01-20 14:03 ` Zenghui Yu
2020-01-20 15:11 ` Marc Zyngier
2020-01-22 2:59 ` Zenghui Yu
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 06/32] irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 07/32] irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 08/32] irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 09/32] irqchip/gic-v4.1: Plumb skeletal VPE irqchip Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 10/32] irqchip/gic-v4.1: Add mask/unmask doorbell callbacks Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 11/32] irqchip/gic-v4.1: Add VPE residency callback Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 12/32] irqchip/gic-v4.1: Add VPE eviction callback Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 13/32] irqchip/gic-v4.1: Add VPE INVALL callback Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 14/32] irqchip/gic-v4.1: Suppress per-VLPI doorbell Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 15/32] irqchip/gic-v4.1: Allow direct invalidation of VLPIs Marc Zyngier
2020-01-24 19:11 ` [tip: irq/core] " tip-bot2 for Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 16/32] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2019-12-24 11:10 ` Marc Zyngier [this message]
2019-12-24 11:10 ` [PATCH v3 18/32] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 19/32] irqchip/gic-v4.1: Add initial SGI configuration Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 20/32] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 21/32] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 22/32] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 23/32] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 24/32] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 25/32] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 26/32] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 27/32] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 28/32] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2019-12-28 9:19 ` Zenghui Yu
2019-12-28 10:41 ` Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 29/32] KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts Marc Zyngier
2020-01-15 2:49 ` Shaokun Zhang
2020-01-15 3:49 ` Zenghui Yu
2020-01-15 13:32 ` Marc Zyngier
2020-01-15 13:49 ` Zenghui Yu
2020-01-16 6:13 ` Shaokun Zhang
2020-01-15 13:17 ` Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 30/32] KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 31/32] KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disable Marc Zyngier
2019-12-24 11:10 ` [PATCH v3 32/32] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191224111055.11836-18-maz@kernel.org \
--to=maz@kernel.org \
--cc=Andrew.Murray@arm.com \
--cc=eric.auger@redhat.com \
--cc=james.morse@arm.com \
--cc=jason@lakedaemon.net \
--cc=julien.thierry.kdev@gmail.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=rrichter@marvell.com \
--cc=suzuki.poulose@arm.com \
--cc=tglx@linutronix.de \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox