[PATCH AUTOSEL 4.19 69/84] net: stmmac: Do not accept invalid MTU values

Sasha Levin
2019-12-27T17:46:24Z

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit eaf4fac478077d4ed57cbca2c044c4b58a96bd98 ]

The maximum MTU value is determined by the maximum size of TX FIFO so
that a full packet can fit in the FIFO. Add a check for this in the MTU
change callback.

Also check if provided and rounded MTU does not passes the maximum limit
of 16K.

Changes from v2:
- Align MTU before checking if its valid

Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 014fe93ed2d8..ec37ef7521e9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3604,12 +3604,24 @@ static void stmmac_set_rx_mode(struct net_device *dev)
static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
{
struct stmmac_priv *priv = netdev_priv(dev);
+ int txfifosz = priv->plat->tx_fifo_size;
+
+ if (txfifosz == 0)
+ txfifosz = priv->dma_cap.tx_fifo_size;
+
+ txfifosz /= priv->plat->tx_queues_to_use;

if (netif_running(dev)) {
netdev_err(priv->dev, "must be stopped to change its MTU\n");
return -EBUSY;
}

+ new_mtu = STMMAC_ALIGN(new_mtu);
+
+ /* If condition true, FIFO is too small or MTU too large */
+ if ((txfifosz < new_mtu) || (new_mtu > BUF_SIZE_16KiB))
+ return -EINVAL;
+
dev->mtu = new_mtu;

netdev_update_features(dev);
--
2.20.1