[PATCH 5.4 429/434] mmc: sdhci: Update the tuning failed messages to pr_debug level

Greg Kroah-Hartman
2019-12-29T17:59:45Z

From: Faiz Abbas <faiz_abbas@ti.com>

commit 2c92dd20304f505b6ef43d206fff21bda8f1f0ae upstream.

Tuning support in DDR50 speed mode was added in SD Specifications Part1
Physical Layer Specification v3.01. Its not possible to distinguish
between v3.00 and v3.01 from the SCR and that is why since
commit 4324f6de6d2e ("mmc: core: enable CMD19 tuning for DDR50 mode")
tuning failures are ignored in DDR50 speed mode.

Cards compatible with v3.00 don't respond to CMD19 in DDR50 and this
error gets printed during enumeration and also if retune is triggered at
any time during operation. Update the printk level to pr_debug so that
these errors don't lead to false error reports.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Cc: stable@vger.kernel.org # v4.4+
Link: https://lore.kernel.org/r/20191206114326.15856-1-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/mmc/host/sdhci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2406,8 +2406,8 @@ static int __sdhci_execute_tuning(struct
sdhci_send_tuning(host, opcode);

if (!host->tuning_done) {
- pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
- mmc_hostname(host->mmc));
+ pr_debug("%s: Tuning timeout, falling back to fixed sampling clock\n",
+ mmc_hostname(host->mmc));
sdhci_abort_tuning(host, opcode);
return -ETIMEDOUT;
}