From: "Andrew F. Davis" <afd@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: <linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
"Andrew F . Davis" <afd@ti.com>
Subject: [PATCH v3 2/4] ARM: OMAP2+: Introduce check for OP-TEE in omap_secure_init()
Date: Mon, 30 Dec 2019 13:50:02 -0500 [thread overview]
Message-ID: <20191230185004.32279-3-afd@ti.com> (raw)
In-Reply-To: <20191230185004.32279-1-afd@ti.com>
This check and associated flag can be used to signal the presence
of OP-TEE on the platform. This can be used to determine which
SMC calls to make to perform secure operations.
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
arch/arm/mach-omap2/omap-secure.c | 14 ++++++++++++++
arch/arm/mach-omap2/omap-secure.h | 3 +++
2 files changed, 17 insertions(+)
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index e936732cdc4f..39d8070aede6 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/memblock.h>
+#include <linux/of.h>
#include <asm/cacheflush.h>
#include <asm/memblock.h>
@@ -20,6 +21,18 @@
static phys_addr_t omap_secure_memblock_base;
+bool optee_available;
+
+static void __init omap_optee_init_check(void)
+{
+ struct device_node *np;
+
+ np = of_find_node_by_path("/firmware/optee");
+ if (np && of_device_is_available(np))
+ optee_available = true;
+ of_node_put(np);
+}
+
/**
* omap_sec_dispatcher: Routine to dispatch low power secure
* service routines
@@ -166,4 +179,5 @@ u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag)
void __init omap_secure_init(void)
{
+ omap_optee_init_check();
}
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index 9aeeb236a224..78a1c4f04bbe 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -10,6 +10,8 @@
#ifndef OMAP_ARCH_OMAP_SECURE_H
#define OMAP_ARCH_OMAP_SECURE_H
+#include <linux/types.h>
+
/* Monitor error code */
#define API_HAL_RET_VALUE_NS2S_CONVERSION_ERROR 0xFFFFFFFE
#define API_HAL_RET_VALUE_SERVICE_UNKNWON 0xFFFFFFFF
@@ -72,6 +74,7 @@ extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
extern u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits);
extern u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag);
+extern bool optee_available;
void omap_secure_init(void);
#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
--
2.17.1
next prev parent reply other threads:[~2019-12-30 18:50 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-30 18:50 [PATCH v3 0/4] Use ARM SMC Calling Convention when OP-TEE is available Andrew F. Davis
2019-12-30 18:50 ` [PATCH v3 1/4] ARM: OMAP2+: Add omap_secure_init callback hook for secure initialization Andrew F. Davis
2019-12-30 18:50 ` Andrew F. Davis [this message]
2019-12-31 6:32 ` [PATCH v3 2/4] ARM: OMAP2+: Introduce check for OP-TEE in omap_secure_init() Lokesh Vutla
2019-12-31 14:15 ` Andrew F. Davis
2020-01-02 17:14 ` Tony Lindgren
2020-01-02 17:24 ` Andrew F. Davis
2019-12-30 18:50 ` [PATCH v3 3/4] ARM: OMAP2+: Use ARM SMC Calling Convention when OP-TEE is available Andrew F. Davis
2019-12-30 18:50 ` [PATCH v3 4/4] ARM: OMAP2+: sleep43xx: Call secure suspend/resume handlers Andrew F. Davis
2019-12-31 6:20 ` Lokesh Vutla
2019-12-31 14:17 ` Andrew F. Davis
2020-01-02 5:02 ` Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191230185004.32279-3-afd@ti.com \
--to=afd@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox