public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Helmut Grohne <helmut.grohne@intenta.de>
To: Support Opensource <support.opensource@diasemi.com>,
	Lee Jones <lee.jones@linaro.org>
Cc: <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/2] mfd: da9062: enable being a system-power-controller
Date: Tue, 7 Jan 2020 13:06:03 +0100	[thread overview]
Message-ID: <20200107120559.GA700@laureti-dev> (raw)

The DA9062 can be the device used to power the CPU. In that case, it can
be used to power off the system. In the CONTROL_A register, the M_*_EN
bits must be zero for the corresponding *_EN bits to have an effect. We
zero them all to turn off the system.

Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
---
 drivers/mfd/da9062-core.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

This patch includes the functionality into the da9062-core driver. If
that is not the preferred way to integrate it, it can be added as a
mfd_cell instead. In that case, I can move the functionality to a new
drivers/power/reset/da9062-poweroff.c. As far as I can see, doing so
implies that we can no longer use the standard system-power-controller
property though and must use a new compatible property
dlg,da9062-poweroff. Please let me know your preference.

diff --git a/drivers/mfd/da9062-core.c b/drivers/mfd/da9062-core.c
index e69626867c26..a2b5dfee677f 100644
--- a/drivers/mfd/da9062-core.c
+++ b/drivers/mfd/da9062-core.c
@@ -572,6 +572,23 @@ static const struct of_device_id da9062_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, da9062_dt_ids);
 
+/* Hold client since pm_power_off is global. */
+static struct i2c_client *da9062_i2c_client;
+
+static void da9062_power_off(void)
+{
+	struct da9062 *chip = i2c_get_clientdata(da9062_i2c_client);
+	const unsigned int mask = DA9062AA_SYSTEM_EN_MASK |
+		DA9062AA_POWER_EN_MASK | DA9062AA_POWER1_EN_MASK |
+		DA9062AA_M_SYSTEM_EN_MASK | DA9062AA_M_POWER_EN_MASK |
+		DA9062AA_M_POWER1_EN_MASK;
+	int ret = regmap_update_bits(chip->regmap, DA9062AA_CONTROL_A, mask, 0);
+
+	if (ret < 0)
+		dev_err(&da9062_i2c_client->dev,
+			"DA9062AA_CONTROL_A update failed, %d\n", ret);
+}
+
 static int da9062_i2c_probe(struct i2c_client *i2c,
 	const struct i2c_device_id *id)
 {
@@ -661,6 +678,15 @@ static int da9062_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
+	if (of_device_is_system_power_controller(i2c->dev.of_node)) {
+		if (!pm_power_off) {
+			da9062_i2c_client = i2c;
+			pm_power_off = da9062_power_off;
+		} else {
+			dev_warn(&i2c->dev, "Poweroff callback already assigned\n");
+		}
+	}
+
 	return ret;
 }
 
@@ -668,6 +694,11 @@ static int da9062_i2c_remove(struct i2c_client *i2c)
 {
 	struct da9062 *chip = i2c_get_clientdata(i2c);
 
+	if (pm_power_off == da9062_power_off)
+		pm_power_off = NULL;
+	if (da9062_i2c_client)
+		da9062_i2c_client = NULL;
+
 	mfd_remove_devices(chip->dev);
 	regmap_del_irq_chip(i2c->irq, chip->regmap_irq);
 
-- 
2.20.1


             reply	other threads:[~2020-01-07 12:12 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-07 12:06 Helmut Grohne [this message]
2020-01-23 15:51 ` [PATCH 1/2] mfd: da9062: enable being a system-power-controller Adam Thomson
2020-01-24  8:53   ` Helmut Grohne
2020-01-24 10:17     ` Adam Thomson
2020-01-24 11:00       ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200107120559.GA700@laureti-dev \
    --to=helmut.grohne@intenta.de \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=support.opensource@diasemi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox