From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Elliot Berman <eberman@codeaurora.org>
Cc: agross@kernel.org, swboyd@chromium.org,
Stephan Gerhold <stephan@gerhold.net>,
saiprakash.ranjan@codeaurora.org, tsoni@codeaurora.org,
sidgup@codeaurora.org, psodagud@codeaurora.org,
Brian Masney <masneyb@onstation.org>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 00/17] Restructure, improve target support for qcom_scm driver
Date: Tue, 7 Jan 2020 22:42:53 -0800 [thread overview]
Message-ID: <20200108064253.GB4023550@builder> (raw)
In-Reply-To: <1578431066-19600-1-git-send-email-eberman@codeaurora.org>
On Tue 07 Jan 13:04 PST 2020, Elliot Berman wrote:
> This series improves support for 32-bit Qualcomm targets on qcom_scm driver and cleans
> up the driver for 64-bit implementations.
>
> Currently, the qcom_scm driver supports only 64-bit Qualcomm targets and very
> old 32-bit Qualcomm targets. Newer 32-bit targets use ARM's SMC Calling
> Convention to communicate with secure world. Older 32-bit targets use a
> "buffer-based" legacy approach for communicating with secure world (as
> implemented in qcom_scm-32.c). All arm64 Qualcomm targets use ARM SMCCC.
> Currently, SMCCC-based communication is enabled only on ARM64 config and
> buffer-based communication only on ARM config. This patch-series combines SMCCC
> and legacy conventions and selects the correct convention by querying the secure
> world [1].
>
> We decided to take the opportunity as well to clean up the driver rather than
> try to patch together qcom_scm-32 and qcom_scm-64.
>
Series applied.
Thank you,
Bjorn
> Patches 1-3 and 15 improve macro names, reorder macros/functions, and prune unused
> macros/functions. No functional changes were introduced.
> Patches 4-8 clears up the SCM abstraction in qcom_scm-64.
> Patches 9-14 clears up the SCM abstraction in qcom_scm-32.
> Patches 16-17 enable dynamically using the different calling conventions.
>
> [1]: https://source.codeaurora.org/quic/la/kernel/msm-4.9/tree/drivers/soc/qcom/scm.c?h=kernel.lnx.4.9.r28-rel#n555
>
> Changes since v4:
> - Restored missing arginfo/args to pas_auth_and_reset
>
> Changes since v3:
> - Updated recepients
>
> Changes since v2:
> - Addressed Stephen's comments throughout v2.
> - Rebased onto latest for-next branch
> - Removed v2 08/18 (firmware: qcom_scm-64: Remove qcom_scm_call_do_smccc)
> - Cleaned up the convention query from v2 to align with [1].
>
> Changes since v1:
> - Renamed functions/variables per Vinod's suggestions
> - Split v1 01/17 into v2 [01,02,03]/18 per Vinod's suggestion
> - Fix suggestions by Bjorn in v1 09/18 (now v2 10/18)
> - Refactor last 3 commits per Bjorn suggestions in v1 17/18 and v1 10/18
>
> Changes since RFC:
> - Fixed missing return values in qcom_scm_call_smccc
> - Fixed order of arguments in qcom_scm_set_warm_boot_addr
> - Adjusted logic of SMC convention to properly support older QCOM secure worlds
> - Boot tested on IFC6410 based on linaro kernel tag:
> debian-qcom-dragonboard410c-18.01 (which does basic verification of legacy
> SCM calls: at least warm_boot_addr, cold_boot_addr, and power_down)
>
> Elliot Berman (17):
> firmware: qcom_scm: Rename macros and structures
> firmware: qcom_scm: Apply consistent naming scheme to command IDs
> firmware: qcom_scm: Remove unused qcom_scm_get_version
> firmware: qcom_scm-64: Make SMC macros less magical
> firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc
> firmware: qcom_scm-64: Add SCM results struct
> firmware: qcom_scm-64: Move SMC register filling to
> qcom_scm_call_smccc
> firmware: qcom_scm-64: Improve SMC convention detection
> firmware: qcom_scm-32: Use SMC arch wrappers
> firmware: qcom_scm-32: Add funcnum IDs
> firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls
> firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call
> firmware: qcom_scm-32: Create common legacy atomic call
> firmware: qcom_scm-32: Add device argument to atomic calls
> firmware: qcom_scm: Order functions, definitions by service/command
> firmware: qcom_scm: Remove thin wrappers
> firmware: qcom_scm: Dynamically support SMCCC and legacy conventions
>
> drivers/firmware/Kconfig | 8 -
> drivers/firmware/Makefile | 5 +-
> drivers/firmware/qcom_scm-32.c | 671 -----------------------------
> drivers/firmware/qcom_scm-64.c | 579 -------------------------
> drivers/firmware/qcom_scm-legacy.c | 242 +++++++++++
> drivers/firmware/qcom_scm-smc.c | 151 +++++++
> drivers/firmware/qcom_scm.c | 854 +++++++++++++++++++++++++++++--------
> drivers/firmware/qcom_scm.h | 178 ++++----
> include/linux/qcom_scm.h | 125 +++---
> 9 files changed, 1232 insertions(+), 1581 deletions(-)
> delete mode 100644 drivers/firmware/qcom_scm-32.c
> delete mode 100644 drivers/firmware/qcom_scm-64.c
> create mode 100644 drivers/firmware/qcom_scm-legacy.c
> create mode 100644 drivers/firmware/qcom_scm-smc.c
>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-01-08 6:42 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-07 21:04 [PATCH v5 00/17] Restructure, improve target support for qcom_scm driver Elliot Berman
2020-01-07 21:04 ` [PATCH v5 01/17] firmware: qcom_scm: Rename macros and structures Elliot Berman
2020-01-07 21:04 ` [PATCH v5 02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs Elliot Berman
2020-01-07 21:04 ` [PATCH v5 03/17] firmware: qcom_scm: Remove unused qcom_scm_get_version Elliot Berman
2020-01-07 21:04 ` [PATCH v5 04/17] firmware: qcom_scm-64: Make SMC macros less magical Elliot Berman
2020-01-07 21:04 ` [PATCH v5 05/17] firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc Elliot Berman
2020-01-07 21:04 ` [PATCH v5 06/17] firmware: qcom_scm-64: Add SCM results struct Elliot Berman
2020-01-07 21:04 ` [PATCH v5 07/17] firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smccc Elliot Berman
2020-01-07 21:04 ` [PATCH v5 08/17] firmware: qcom_scm-64: Improve SMC convention detection Elliot Berman
2020-01-07 21:04 ` [PATCH v5 09/17] firmware: qcom_scm-32: Use SMC arch wrappers Elliot Berman
2020-01-07 21:04 ` [PATCH v5 10/17] firmware: qcom_scm-32: Add funcnum IDs Elliot Berman
2020-01-07 21:04 ` [PATCH v5 11/17] firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls Elliot Berman
2020-01-07 21:04 ` [PATCH v5 12/17] firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call Elliot Berman
2020-01-07 21:04 ` [PATCH v5 13/17] firmware: qcom_scm-32: Create common legacy atomic call Elliot Berman
2020-01-07 21:04 ` [PATCH v5 14/17] firmware: qcom_scm-32: Add device argument to atomic calls Elliot Berman
2020-01-07 21:04 ` [PATCH v5 15/17] firmware: qcom_scm: Order functions, definitions by service/command Elliot Berman
2020-01-07 21:04 ` [PATCH v5 16/17] firmware: qcom_scm: Remove thin wrappers Elliot Berman
2020-01-07 21:04 ` [PATCH v5 17/17] firmware: qcom_scm: Dynamically support SMCCC and legacy conventions Elliot Berman
2020-01-08 7:02 ` Stephen Boyd
2020-01-08 6:42 ` Bjorn Andersson [this message]
2020-01-08 6:54 ` [PATCH v5 00/17] Restructure, improve target support for qcom_scm driver Stephen Boyd
2020-01-08 7:21 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200108064253.GB4023550@builder \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=eberman@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=masneyb@onstation.org \
--cc=psodagud@codeaurora.org \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=sidgup@codeaurora.org \
--cc=stephan@gerhold.net \
--cc=swboyd@chromium.org \
--cc=tsoni@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox