Re: [PATCH v2 27/36] mfd: intel_soc_pmic_bxtwc: Convert to use new SCU IPC API

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Wed, Jan 08, 2020 at 02:41:52PM +0300, Mika Westerberg wrote:
> Convert the Intel Broxton Whiskey Cover PMIC driver to use the new SCU
> IPC API. This allows us to get rid of the PMC IPC implementation which
> is now covered in SCU IPC driver.
> 
> Also move PMIC specific IPC message constants to the PMIC driver from
> the intel_pmc_ipc.h header.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> 
> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> ---
>  arch/x86/include/asm/intel_pmc_ipc.h |  3 ---
>  drivers/mfd/intel_soc_pmic_bxtwc.c   | 22 +++++++++++++++-------
>  2 files changed, 15 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/x86/include/asm/intel_pmc_ipc.h b/arch/x86/include/asm/intel_pmc_ipc.h
> index e6da1ce26256..b438a488f613 100644
> --- a/arch/x86/include/asm/intel_pmc_ipc.h
> +++ b/arch/x86/include/asm/intel_pmc_ipc.h
> @@ -3,9 +3,6 @@
>  #define  _ASM_X86_INTEL_PMC_IPC_H_
>  
>  /* Commands */
> -#define PMC_IPC_PMIC_ACCESS		0xFF
> -#define		PMC_IPC_PMIC_ACCESS_READ	0x0
> -#define		PMC_IPC_PMIC_ACCESS_WRITE	0x1
>  #define PMC_IPC_USB_PWR_CTRL		0xF0
>  #define PMC_IPC_PMIC_BLACKLIST_SEL	0xEF
>  #define PMC_IPC_PHY_CONFIG		0xEE
> diff --git a/drivers/mfd/intel_soc_pmic_bxtwc.c b/drivers/mfd/intel_soc_pmic_bxtwc.c
> index 739cfb5b69fe..60aba2a1561c 100644
> --- a/drivers/mfd/intel_soc_pmic_bxtwc.c
> +++ b/drivers/mfd/intel_soc_pmic_bxtwc.c
> @@ -15,7 +15,7 @@
>  #include <linux/mfd/intel_soc_pmic_bxtwc.h>
>  #include <linux/module.h>
>  
> -#include <asm/intel_pmc_ipc.h>
> +#include <asm/intel_scu_ipc.h>
>  
>  /* PMIC device registers */
>  #define REG_ADDR_MASK		0xFF00
> @@ -58,6 +58,10 @@
>  /* Whiskey Cove PMIC share same ACPI ID between different platforms */
>  #define BROXTON_PMIC_WC_HRV	4
>  
> +#define PMC_PMIC_ACCESS		0xFF
> +#define PMC_PMIC_READ		0x0
> +#define PMC_PMIC_WRITE		0x1
> +
>  enum bxtwc_irqs {
>  	BXTWC_PWRBTN_LVL1_IRQ = 0,
>  	BXTWC_TMU_LVL1_IRQ,
> @@ -288,9 +292,9 @@ static int regmap_ipc_byte_reg_read(void *context, unsigned int reg,
>  
>  	ipc_in[0] = reg;
>  	ipc_in[1] = i2c_addr;
> -	ret = intel_pmc_ipc_command(PMC_IPC_PMIC_ACCESS,
> -			PMC_IPC_PMIC_ACCESS_READ,
> -			ipc_in, sizeof(ipc_in), (u32 *)ipc_out, 1);
> +	ret = intel_scu_ipc_dev_command(pmic->scu, PMC_PMIC_ACCESS,
> +					PMC_PMIC_READ, ipc_in, sizeof(ipc_in),
> +					ipc_out, sizeof(ipc_out));
>  	if (ret) {
>  		dev_err(pmic->dev, "Failed to read from PMIC\n");
>  		return ret;
> @@ -321,9 +325,9 @@ static int regmap_ipc_byte_reg_write(void *context, unsigned int reg,
>  	ipc_in[0] = reg;
>  	ipc_in[1] = i2c_addr;
>  	ipc_in[2] = val;
> -	ret = intel_pmc_ipc_command(PMC_IPC_PMIC_ACCESS,
> -			PMC_IPC_PMIC_ACCESS_WRITE,
> -			ipc_in, sizeof(ipc_in), NULL, 0);
> +	ret = intel_scu_ipc_dev_command(pmic->scu, PMC_PMIC_ACCESS,
> +					PMC_PMIC_WRITE, ipc_in, sizeof(ipc_in),
> +					NULL, 0);
>  	if (ret) {
>  		dev_err(pmic->dev, "Failed to write to PMIC\n");
>  		return ret;
> @@ -457,6 +461,10 @@ static int bxtwc_probe(struct platform_device *pdev)
>  	dev_set_drvdata(&pdev->dev, pmic);
>  	pmic->dev = &pdev->dev;
>  
> +	pmic->scu = devm_intel_scu_ipc_dev_get(&pdev->dev);
> +	if (!pmic->scu)
> +		return -EPROBE_DEFER;
> +
>  	pmic->regmap = devm_regmap_init(&pdev->dev, NULL, pmic,
>  					&bxtwc_regmap_config);
>  	if (IS_ERR(pmic->regmap)) {
> -- 
> 2.24.1
> 

-- 
With Best Regards,
Andy Shevchenko