[PATCH 5.4 037/203] s390/qeth: fix initialization on old HW

Greg Kroah-Hartman
2020-01-16T23:21:15Z

From: Julian Wiedmann <jwi@linux.ibm.com>

commit 0b698c838e84149b690c7e979f78cccb6f8aa4b9 upstream.

I stumbled over an old OSA model that claims to support DIAG_ASSIST,
but then rejects the cmd to query its DIAG capabilities.

In the old code this was ok, as the returned raw error code was > 0.
Now that we translate the raw codes to errnos, the "rc < 0" causes us
to fail the initialization of the device.

The fix is trivial: don't bail out when the DIAG query fails. Such an
error is not critical, we can still use the device (with a slightly
reduced set of features).

Fixes: 742d4d40831d ("s390/qeth: convert remaining legacy cmd callbacks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/s390/net/qeth_core_main.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -4968,10 +4968,8 @@ retriable:
}
if (qeth_adp_supported(card, IPA_SETADP_SET_DIAG_ASSIST)) {
rc = qeth_query_setdiagass(card);
- if (rc < 0) {
+ if (rc)
QETH_CARD_TEXT_(card, 2, "8err%d", rc);
- goto out;
- }
}
return 0;