Re: [PATCH 1/3] ARM: dts: exynos: Add GPU thermal zone cooling maps for Odroid XU3/XU4/HC1

Krzysztof Kozlowski
2020-01-17T18:52:05Z

On Fri, Jan 17, 2020 at 01:34:46PM +0100, Marek Szyprowski wrote:
> Add trip points and cooling maps for GPU thermal zone for Odroid
> XU3/XU4/HC1 boards. Trip points are based on the CPU thermal zone for the
> those boards.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
> arch/arm/boot/dts/exynos5422-odroidhc1.dts | 32 ++++++++++
> .../boot/dts/exynos5422-odroidxu3-common.dtsi | 59 +++++++++++++++++++
> 2 files changed, 91 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
> index f163206265bb..8f38ef5bff55 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
> +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
> @@ -215,6 +215,38 @@
> };
> };
> };
> + gpu_thermal: gpu-thermal {
> + thermal-sensors = <&tmu_gpu 0>;
> + polling-delay-passive = <250>;
> + polling-delay = <0>;

These should not be needed - you do not add more than 4 thermal zones.

Best regards,
Krzysztof