Re: [PATCH v2 0/5] hwmon: k10temp driver improvements

Andreas Hartmann
2020-01-21T06:35:07Z

On 18.01.20 at 18:26 Guenter Roeck wrote:
> This patch series implements various improvements for the k10temp driver.

Tested with Asus Prime X370-PRO / 1700X / Linux 5.4.x

Tested-By: Andreas Hartmann <andihartmann@01019freenet.de>

Idle:

it8665-isa-0290
Adapter: ISA adapter
in0: +0.88 V (min = +1.27 V, max = +2.00 V)
in1: +2.52 V (min = +2.76 V, max = +2.55 V)
in2: +2.05 V (min = +1.23 V, max = +0.16 V)
in3: +2.01 V (min = +1.53 V, max = +2.25 V)
in4: +0.03 V (min = +2.67 V, max = +2.43 V)
in5: +0.03 V (min = +2.39 V, max = +1.21 V)
in6: +0.03 V (min = +1.67 V, max = +0.56 V)
3VSB: +3.31 V (min = +2.46 V, max = +5.43 V)
Vbat: +3.25 V
+3.3V: +3.31 V
Fan CPU: 594 RPM (min = 10 RPM)
Fan back: 380 RPM (min = 11 RPM)
Fan front: 415 RPM (min = 12 RPM)
fan5: 0 RPM (min = -1 RPM) ALARM
fan6: 0 RPM (min = -1 RPM) ALARM
CPU: +28.0°C (low = +112.0°C, high = -5.0°C)
Motherboard: +30.0°C (low = -33.0°C, high = -18.0°C) sensor = thermistor
temp3: +29.0°C (low = -1.0°C, high = -105.0°C) sensor = thermistor
temp4: +29.0°C (low = -74.0°C, high = +126.0°C) sensor = thermistor
temp5: +29.0°C (low = -49.0°C, high = +127.0°C) sensor = thermistor
temp6: +29.0°C (low = -82.0°C, high = -79.0°C) sensor = thermistor
intrusion0: ALARM

k10temp-pci-00c3
Adapter: PCI adapter
Vcore: +0.90 V
Vsoc: +0.90 V
CPU: +28.6°C (high = +70.0°C)
Tctl: +48.6°C
Icore: +5.20 A
Isoc: +7.21 A

Load:

it8665-isa-0290
Adapter: ISA adapter
in0: +1.38 V (min = +1.27 V, max = +2.00 V)
in1: +2.52 V (min = +2.76 V, max = +2.55 V)
in2: +2.04 V (min = +1.23 V, max = +0.16 V)
in3: +2.01 V (min = +1.53 V, max = +2.25 V)
in4: +0.03 V (min = +2.67 V, max = +2.43 V)
in5: +0.03 V (min = +2.39 V, max = +1.21 V)
in6: +0.03 V (min = +1.67 V, max = +0.56 V)
3VSB: +3.33 V (min = +2.46 V, max = +5.43 V)
Vbat: +3.25 V
+3.3V: +3.33 V
Fan CPU: 798 RPM (min = 10 RPM)
Fan back: 481 RPM (min = 11 RPM)
Fan front: 460 RPM (min = 12 RPM)
fan5: 0 RPM (min = -1 RPM) ALARM
fan6: 0 RPM (min = -1 RPM) ALARM
CPU: +43.0°C (low = +112.0°C, high = -5.0°C)
Motherboard: +30.0°C (low = -33.0°C, high = -18.0°C) sensor = thermistor
temp3: +33.0°C (low = -1.0°C, high = -105.0°C) sensor = thermistor
temp4: +33.0°C (low = -74.0°C, high = +126.0°C) sensor = thermistor
temp5: +33.0°C (low = -49.0°C, high = +127.0°C) sensor = thermistor
temp6: +33.0°C (low = -82.0°C, high = -79.0°C) sensor = thermistor
intrusion0: ALARM

k10temp-pci-00c3
Adapter: PCI adapter
Vcore: +1.30 V
Vsoc: +0.90 V
CPU: +49.5°C (high = +70.0°C)
Tctl: +69.5°C
Icore: +77.94 A
Isoc: +9.02 A

it8665-isa-0290
Adapter: ISA adapter
in0: +1.36 V (min = +1.27 V, max = +2.00 V)
in1: +2.52 V (min = +2.76 V, max = +2.55 V)
in2: +2.04 V (min = +1.23 V, max = +0.16 V)
in3: +2.00 V (min = +1.53 V, max = +2.25 V)
in4: +0.03 V (min = +2.67 V, max = +2.43 V)
in5: +0.03 V (min = +2.39 V, max = +1.21 V)
in6: +0.03 V (min = +1.67 V, max = +0.56 V)
3VSB: +3.33 V (min = +2.46 V, max = +5.43 V)
Vbat: +3.25 V
+3.3V: +3.33 V
Fan CPU: 1044 RPM (min = 10 RPM)
Fan back: 722 RPM (min = 11 RPM)
Fan front: 633 RPM (min = 12 RPM)
fan5: 0 RPM (min = -1 RPM) ALARM
fan6: 0 RPM (min = -1 RPM) ALARM
CPU: +49.0°C (low = +112.0°C, high = -5.0°C)
Motherboard: +30.0°C (low = -33.0°C, high = -18.0°C) sensor = thermistor
temp3: +39.0°C (low = -1.0°C, high = -105.0°C) sensor = thermistor
temp4: +39.0°C (low = -74.0°C, high = +126.0°C) sensor = thermistor
temp5: +39.0°C (low = -49.0°C, high = +127.0°C) sensor = thermistor
temp6: +39.0°C (low = -82.0°C, high = -79.0°C) sensor = thermistor
intrusion0: ALARM

k10temp-pci-00c3
Adapter: PCI adapter
Vcore: +1.30 V
Vsoc: +0.90 V
CPU: +52.1°C (high = +70.0°C)
Tctl: +72.1°C
Icore: +78.98 A
Isoc: +9.02 A

=> I can see slight differences regarding CPU temperature and Vcore between it8665 and k10temp - especially on high load (kernel compile).

Thanks
Andreas