Re: [PATCH v3 2/3] dt-bindings: soc: qcom: apr: Add protection domain bindings

[Rob Herring <robh@kernel.org>]

On Mon, Dec 30, 2019 at 10:30:07AM +0530, Sibi Sankar wrote:
> Add optional "qcom,protection-domain" bindings for APR services. This
> helps to capture the dependencies between APR services and the PD on
> which each apr service run.

This is meaningless to me...

> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
>  .../devicetree/bindings/soc/qcom/qcom,apr.txt | 59 +++++++++++++++++++
>  1 file changed, 59 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> index db501269f47b8..f87c0b2a48de4 100644
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> @@ -45,6 +45,12 @@ by the individual bindings for the specific service
>  			12 - Ultrasound stream manager.
>  			13 - Listen stream manager.
>  
> +- qcom,protection-domain
> +	Usage: optional
> +	Value type: <stringlist>
> +	Definition: Must list the protection domain service name and path
> +		    that the particular apr service has a dependency on.

How many strings can there be and can you enumerate the possible 
strings?

> +
>  = EXAMPLE
>  The following example represents a QDSP based sound card on a MSM8996 device
>  which uses apr as communication between Apps and QDSP.
> @@ -82,3 +88,56 @@ which uses apr as communication between Apps and QDSP.
>  			...
>  		};
>  	};
> +
> += EXAMPLE 2
> +The following example represents a QDSP based sound card on SDM845 device.
> +Here the apr services are dependent on "avs/audio" service running on AUDIO
> +Protection Domain hosted on ADSP remote processor.
> +
> +	apr {
> +		compatible = "qcom,apr-v2";
> +		qcom,glink-channels = "apr_audio_svc";
> +		qcom,apr-domain = <APR_DOMAIN_ADSP>;
> +
> +		q6core {
> +			compatible = "qcom,q6core";
> +			reg = <APR_SVC_ADSP_CORE>;
> +			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> +		};
> +
> +		q6afe: q6afe {
> +			compatible = "qcom,q6afe";
> +			reg = <APR_SVC_AFE>;
> +			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> +			q6afedai: dais {
> +				compatible = "qcom,q6afe-dais";
> +				#sound-dai-cells = <1>;
> +
> +				qi2s@22 {
> +					reg = <22>;
> +					qcom,sd-lines = <3>;
> +				};
> +			};
> +		};
> +
> +		q6asm: q6asm {
> +			compatible = "qcom,q6asm";
> +			reg = <APR_SVC_ASM>;
> +			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> +			q6asmdai: dais {
> +				compatible = "qcom,q6asm-dais";
> +				#sound-dai-cells = <1>;
> +				iommus = <&apps_smmu 0x1821 0x0>;
> +			};
> +		};
> +
> +		q6adm: q6adm {
> +			compatible = "qcom,q6adm";
> +			reg = <APR_SVC_ADM>;
> +			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";

Perhaps an example where not everything is the same. The example shows 
me this isn't needed in DT.

> +			q6routing: routing {
> +				compatible = "qcom,q6adm-routing";
> +				#sound-dai-cells = <0>;
> +			};
> +		};
> +	};
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>