RE: clk: imx: clock driver for imx8qm?

Aisheng Dong
2020-02-17T07:31:25Z

> From: Shawn Guo <shawnguo@kernel.org>
> Sent: Monday, February 17, 2020 3:05 PM
>
> On Fri, Feb 14, 2020 at 05:50:48AM +0000, Aisheng Dong wrote:
> > > From: Oliver Graute <oliver.graute@gmail.com>
> > > Sent: Friday, February 14, 2020 1:42 AM
> > >
> > > On 13/02/20, Aisheng Dong wrote:
> > > > Hi Oliver,
> > > >
> > > > >
> > > > > is someone working on clock driver for imx8qm? I miss at least a
> > > > > clk-imx8qm.c in the drivers/imx/clk/ directory. I saw that you
> > > > > are working in this area and perhaps you can give me some
> > > > > insights what is
> > > needed here.
> > > > >
> > > >
> > > > MX8QM/QXP are using the same clock driver clk-imx8qxp.c
> > >
> > > ok thx, for that clarification.
> > >
> > > >
> > > > [PATCH RESEND V5 00/11] clk: imx8: add new clock binding for
> > > > better pm The review of that patch series is pending for a couple of
> months.
> > >
> > > yes that is what I currently use. So further imx8qm development can
> > > happen if this is integrated?
> >
> > Yes, it blocks the most following MX8QXP/QM work.
> > Let me loop in Shawn to see if any suggestions.
> >
> > Shawn,
> > Any ideas?
>
> I guess there are still something Stephen is unhappy about, as we haven't got a
> nod from him. Do we really addressed all his comments and concerns already?
>

I remember I addressed all Stephen's comments in the last round of review
which is marked in the V5 resend change log.
https://www.spinics.net/lists/arm-kernel/msg769365.html

But I can double check it.
Should I re-send after a checking or wait for Stephen's feedback?

As this does block a lot of following qm/qxp work for a long time, hopefully we
can get some feedback/guidance from Stephen.

BTW, this patchset is already used in NXP internal 5.4 release although it's missed
5.4 LTS kernel.

Regards
Aisheng

> Shawn