From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Shay Bar <shay.bar@celeno.com>,
Aviad Brikman <aviad.brikman@celeno.com>,
Johannes Berg <johannes.berg@intel.com>,
Sasha Levin <sashal@kernel.org>,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 5.4 45/50] mac80211: fix wrong 160/80+80 MHz setting
Date: Sat, 22 Feb 2020 21:22:30 -0500 [thread overview]
Message-ID: <20200223022235.1404-45-sashal@kernel.org> (raw)
In-Reply-To: <20200223022235.1404-1-sashal@kernel.org>
From: Shay Bar <shay.bar@celeno.com>
[ Upstream commit 33181ea7f5a62a17fbe55f0f73428ecb5e686be8 ]
Before this patch, STA's would set new width of 160/80+80 MHz based on AP capability only.
This is wrong because STA may not support > 80MHz BW.
Fix is to verify STA has 160/80+80 MHz capability before increasing its width to > 80MHz.
The "support_80_80" and "support_160" setting is based on:
"Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW
Support subfield at a STA transmitting the VHT Capabilities Information field"
From "Draft P802.11REVmd_D3.0.pdf"
Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com>
Signed-off-by: Shay Bar <shay.bar@celeno.com>
Link: https://lore.kernel.org/r/20200210130728.23674-1-shay.bar@celeno.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/mac80211/util.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 739e90555d8b9..decd46b383938 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2993,10 +2993,22 @@ bool ieee80211_chandef_vht_oper(struct ieee80211_hw *hw,
int cf0, cf1;
int ccfs0, ccfs1, ccfs2;
int ccf0, ccf1;
+ u32 vht_cap;
+ bool support_80_80 = false;
+ bool support_160 = false;
if (!oper || !htop)
return false;
+ vht_cap = hw->wiphy->bands[chandef->chan->band]->vht_cap.cap;
+ support_160 = (vht_cap & (IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK |
+ IEEE80211_VHT_CAP_EXT_NSS_BW_MASK));
+ support_80_80 = ((vht_cap &
+ IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) ||
+ (vht_cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ &&
+ vht_cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) ||
+ ((vht_cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) >>
+ IEEE80211_VHT_CAP_EXT_NSS_BW_SHIFT > 1));
ccfs0 = oper->center_freq_seg0_idx;
ccfs1 = oper->center_freq_seg1_idx;
ccfs2 = (le16_to_cpu(htop->operation_mode) &
@@ -3024,10 +3036,10 @@ bool ieee80211_chandef_vht_oper(struct ieee80211_hw *hw,
unsigned int diff;
diff = abs(ccf1 - ccf0);
- if (diff == 8) {
+ if ((diff == 8) && support_160) {
new.width = NL80211_CHAN_WIDTH_160;
new.center_freq1 = cf1;
- } else if (diff > 8) {
+ } else if ((diff > 8) && support_80_80) {
new.width = NL80211_CHAN_WIDTH_80P80;
new.center_freq2 = cf1;
}
--
2.20.1
next prev parent reply other threads:[~2020-02-23 2:23 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-23 2:21 [PATCH AUTOSEL 5.4 01/50] ipmi:ssif: Handle a possible NULL pointer reference Sasha Levin
2020-02-23 2:21 ` [PATCH AUTOSEL 5.4 02/50] drm/msm: Set dma maximum segment size for mdss Sasha Levin
2020-02-23 2:21 ` [PATCH AUTOSEL 5.4 03/50] sched/core: Don't skip remote tick for idle CPUs Sasha Levin
2020-02-23 2:21 ` [PATCH AUTOSEL 5.4 04/50] timers/nohz: Update NOHZ load in remote tick Sasha Levin
2020-02-23 2:21 ` [PATCH AUTOSEL 5.4 05/50] sched/fair: Prevent unlimited runtime on throttled group Sasha Levin
2020-02-23 2:21 ` [PATCH AUTOSEL 5.4 06/50] dax: pass NOWAIT flag to iomap_apply Sasha Levin
2020-02-23 2:21 ` [PATCH AUTOSEL 5.4 07/50] mac80211: consider more elements in parsing CRC Sasha Levin
2020-02-23 2:21 ` [PATCH AUTOSEL 5.4 08/50] cfg80211: check wiphy driver existence for drvinfo report Sasha Levin
2020-02-23 2:21 ` [PATCH AUTOSEL 5.4 09/50] s390/zcrypt: fix card and queue total counter wrap Sasha Levin
2020-02-23 2:21 ` [PATCH AUTOSEL 5.4 10/50] qmi_wwan: re-add DW5821e pre-production variant Sasha Levin
2020-02-23 2:21 ` [PATCH AUTOSEL 5.4 11/50] qmi_wwan: unconditionally reject 2 ep interfaces Sasha Levin
2020-02-23 2:21 ` [PATCH AUTOSEL 5.4 12/50] NFSv4: Fix races between open and dentry revalidation Sasha Levin
2020-02-23 2:21 ` [PATCH AUTOSEL 5.4 13/50] perf/smmuv3: Use platform_get_irq_optional() for wired interrupt Sasha Levin
2020-02-23 2:21 ` [PATCH AUTOSEL 5.4 14/50] arm/ftrace: Fix BE text poking Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 15/50] sched/psi: Fix OOB write when writing 0 bytes to PSI files Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 16/50] perf/x86/intel: Add Elkhart Lake support Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 17/50] perf/x86/cstate: Add Tremont support Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 18/50] perf/x86/msr: " Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 19/50] ceph: do not execute direct write in parallel if O_APPEND is specified Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 20/50] ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsi Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 21/50] drm/amd/display: Do not set optimized_require to false after plane disable Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 22/50] RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready() Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 23/50] drm/amd/display: Check engine is not NULL before acquiring Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 24/50] drm/amd/display: Limit minimum DPPCLK to 100MHz Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 25/50] drm/amd/display: Add initialitions for PLL2 clock source Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 26/50] amdgpu: Prevent build errors regarding soft/hard-float FP ABI tags Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 27/50] soc/tegra: fuse: Fix build with Tegra194 configuration Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 28/50] i40e: Fix the conditional for i40e_vc_validate_vqs_bitmaps Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 29/50] net: ena: fix potential crash when rxfh key is NULL Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 30/50] net: ena: fix uses of round_jiffies() Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 31/50] net: ena: add missing ethtool TX timestamping indication Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 32/50] net: ena: fix incorrect default RSS key Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 33/50] net: ena: rss: do not allocate key when not supported Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 34/50] net: ena: rss: fix failure to get indirection table Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 35/50] net: ena: rss: store hash function as values and not bits Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 36/50] net: ena: fix incorrectly saving queue numbers when setting RSS indirection table Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 37/50] net: ena: fix corruption of dev_idx_to_host_tbl Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 38/50] net: ena: ethtool: use correct value for crc32 hash Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 39/50] net: ena: ena-com.c: prevent NULL pointer dereference Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 40/50] enic: prevent waking up stopped tx queues over watchdog reset Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 41/50] ice: update Unit Load Status bitmask to check after reset Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 42/50] cifs: Fix mode output in debugging statements Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 43/50] bcache: ignore pending signals when creating gc and allocator thread Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 44/50] cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE Sasha Levin
2020-02-23 2:22 ` Sasha Levin [this message]
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 46/50] net: hns3: add management table after IMP reset Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 47/50] net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples() Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 48/50] nvme/tcp: fix bug on double requeue when send fails Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 49/50] nvme: prevent warning triggered by nvme_stop_keep_alive Sasha Levin
2020-02-23 2:22 ` [PATCH AUTOSEL 5.4 50/50] nvme/pci: move cqe check after device shutdown Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200223022235.1404-45-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=aviad.brikman@celeno.com \
--cc=johannes.berg@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=shay.bar@celeno.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox