Re: [PATCH v3 2/3] dt-bindings: thermal: tsens: Add qcom,tsens-v0_1 to msm8916.dtsi compatible

Bjorn Andersson
2020-02-28T03:21:16Z

On Wed 26 Feb 01:31 PST 2020, Amit Kucheria wrote:

$subject should be "arm64: dts: qcom: msm8916: ..."

Apart from that this looks good.

Regards,
Bjorn

> The qcom-tsens binding requires a SoC-specific and a TSENS
> family-specific binding to be specified in the compatible string.
>
> Since them family-specific binding is not listed in the .dtsi file, we
> see the following warnings in 'make dtbs_check'. Fix them.
>
> /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
> thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is not valid
> under any of the given schemas (Possible causes of the failure):
> /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
> thermal-sensor@4a9000: compatible: ['qcom,msm8916-tsens'] is too short
> /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
> thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of
> ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
> /home/amit/work/builds/build-aarch64/arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml:
> thermal-sensor@4a9000: compatible:0: 'qcom,msm8916-tsens' is not one of
> ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 9f31064f2374..1748ea3f4b4f 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -860,7 +860,7 @@
> };
>
> tsens: thermal-sensor@4a9000 {
> - compatible = "qcom,msm8916-tsens";
> + compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
> reg = <0x4a9000 0x1000>, /* TM */
> <0x4a8000 0x1000>; /* SROT */
> nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
> --
> 2.20.1
>