From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: linux-integrity@vger.kernel.org, aik@ozlabs.ru,
david@gibson.dropbear.id.au, linux-kernel@vger.kernel.org,
nayna@linux.vnet.ibm.com, gcwilson@linux.ibm.com, jgg@ziepe.ca,
Stefan Berger <stefanb@linux.ibm.com>
Subject: Re: [PATCH v5 3/3] tpm: ibmvtpm: Add support for TPM 2
Date: Mon, 2 Mar 2020 13:15:14 +0200 [thread overview]
Message-ID: <20200302111514.GC3979@linux.intel.com> (raw)
In-Reply-To: <20200228030330.18081-4-stefanb@linux.vnet.ibm.com>
On Thu, Feb 27, 2020 at 10:03:30PM -0500, Stefan Berger wrote:
> From: Stefan Berger <stefanb@linux.ibm.com>
>
> Support TPM 2 in the IBM vTPM driver. The hypervisor tells us what
> version of TPM is connected through the vio_device_id.
I'd prefer "TPM2" over "TPM 2".
> In case a TPM 2 is found, we set the TPM_CHIP_FLAG_TPM2 flag
> and get the command codes attributes table. The driver does
> not need the timeouts and durations, though.
A TPM2 what? TPM2 is not a thing.
> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
> ---
> drivers/char/tpm/tpm.h | 1 +
> drivers/char/tpm/tpm2-cmd.c | 2 +-
> drivers/char/tpm/tpm_ibmvtpm.c | 8 ++++++++
> 3 files changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
> index 5620747da0cf..ad55c9824338 100644
> --- a/drivers/char/tpm/tpm.h
> +++ b/drivers/char/tpm/tpm.h
> @@ -226,6 +226,7 @@ int tpm2_auto_startup(struct tpm_chip *chip);
> void tpm2_shutdown(struct tpm_chip *chip, u16 shutdown_type);
> unsigned long tpm2_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal);
> int tpm2_probe(struct tpm_chip *chip);
> +int tpm2_get_cc_attrs_tbl(struct tpm_chip *chip);
> int tpm2_find_cc(struct tpm_chip *chip, u32 cc);
> int tpm2_init_space(struct tpm_space *space);
> void tpm2_del_space(struct tpm_chip *chip, struct tpm_space *space);
> diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
> index 13696deceae8..b6a0ee6bb03a 100644
> --- a/drivers/char/tpm/tpm2-cmd.c
> +++ b/drivers/char/tpm/tpm2-cmd.c
> @@ -613,7 +613,7 @@ ssize_t tpm2_get_pcr_allocation(struct tpm_chip *chip)
> return rc;
> }
>
> -static int tpm2_get_cc_attrs_tbl(struct tpm_chip *chip)
> +int tpm2_get_cc_attrs_tbl(struct tpm_chip *chip)
> {
> struct tpm_buf buf;
> u32 nr_commands;
> diff --git a/drivers/char/tpm/tpm_ibmvtpm.c b/drivers/char/tpm/tpm_ibmvtpm.c
> index eee566eddb35..676a65148f82 100644
> --- a/drivers/char/tpm/tpm_ibmvtpm.c
> +++ b/drivers/char/tpm/tpm_ibmvtpm.c
> @@ -29,6 +29,7 @@ static const char tpm_ibmvtpm_driver_name[] = "tpm_ibmvtpm";
>
> static const struct vio_device_id tpm_ibmvtpm_device_table[] = {
> { "IBM,vtpm", "IBM,vtpm"},
> + { "IBM,vtpm", "IBM,vtpm20"},
> { "", "" }
> };
> MODULE_DEVICE_TABLE(vio, tpm_ibmvtpm_device_table);
> @@ -672,6 +673,13 @@ static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev,
> if (rc)
> goto init_irq_cleanup;
>
> + if (!strcmp(id->compat, "IBM,vtpm20")) {
> + chip->flags |= TPM_CHIP_FLAG_TPM2;
> + rc = tpm2_get_cc_attrs_tbl(chip);
> + if (rc)
> + goto init_irq_cleanup;
> + }
> +
> if (!wait_event_timeout(ibmvtpm->crq_queue.wq,
> ibmvtpm->rtce_buf != NULL,
> HZ)) {
> --
> 2.23.0
>
The code change looks fine.
/Jarkko
next prev parent reply other threads:[~2020-03-02 11:15 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-28 3:03 [PATCH v5 0/3] Enable vTPM 2.0 for the IBM vTPM driver Stefan Berger
2020-02-28 3:03 ` [PATCH v5 1/3] tpm: of: Handle IBM,vtpm20 case when getting log parameters Stefan Berger
2020-02-28 3:03 ` [PATCH v5 2/3] tpm: ibmvtpm: Wait for buffer to be set before proceeding Stefan Berger
2020-03-02 11:11 ` Jarkko Sakkinen
2020-03-02 17:57 ` Nayna
2020-02-28 3:03 ` [PATCH v5 3/3] tpm: ibmvtpm: Add support for TPM 2 Stefan Berger
2020-03-02 11:15 ` Jarkko Sakkinen [this message]
2020-03-02 16:21 ` Stefan Berger
2020-03-03 20:11 ` Jarkko Sakkinen
2020-03-04 13:18 ` Stefan Berger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200302111514.GC3979@linux.intel.com \
--to=jarkko.sakkinen@linux.intel.com \
--cc=aik@ozlabs.ru \
--cc=david@gibson.dropbear.id.au \
--cc=gcwilson@linux.ibm.com \
--cc=jgg@ziepe.ca \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nayna@linux.vnet.ibm.com \
--cc=stefanb@linux.ibm.com \
--cc=stefanb@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox