From: Krzysztof Kozlowski <krzk@kernel.org>
To: "Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
linux-pwm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Claudiu Beznea <claudiu.beznea@microchip.com>,
Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v2] pwm: Enable compile testing for some of drivers
Date: Tue, 3 Mar 2020 21:24:47 +0100 [thread overview]
Message-ID: <20200303202447.4245-1-krzk@kernel.org> (raw)
Some of the PWM drivers can be compile tested to increase build
coverage.
The Meson PWM driver requires COMMON_CLK dependency.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> # For Broadcoam
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # For Meson
Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com> # For Atmel
---
Changes since v1:
1. Split "depends on OF" to separate entry in PWM_ATMEL and PWM_MXS.
---
drivers/pwm/Kconfig | 47 ++++++++++++++++++++++++---------------------
1 file changed, 25 insertions(+), 22 deletions(-)
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 30190beeb6e9..70153bf11201 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -44,7 +44,8 @@ config PWM_AB8500
config PWM_ATMEL
tristate "Atmel PWM support"
- depends on ARCH_AT91 && OF
+ depends on OF
+ depends on ARCH_AT91 || COMPILE_TEST
help
Generic PWM framework driver for Atmel SoC.
@@ -100,7 +101,7 @@ config PWM_BCM_KONA
config PWM_BCM2835
tristate "BCM2835 PWM support"
- depends on ARCH_BCM2835 || ARCH_BRCMSTB
+ depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
help
PWM framework driver for BCM2835 controller (Raspberry Pi)
@@ -109,7 +110,7 @@ config PWM_BCM2835
config PWM_BERLIN
tristate "Marvell Berlin PWM support"
- depends on ARCH_BERLIN
+ depends on ARCH_BERLIN || COMPILE_TEST
help
PWM framework driver for Marvell Berlin SoCs.
@@ -118,7 +119,7 @@ config PWM_BERLIN
config PWM_BRCMSTB
tristate "Broadcom STB PWM support"
- depends on ARCH_BRCMSTB || BMIPS_GENERIC
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
help
Generic PWM framework driver for the Broadcom Set-top-Box
SoCs (BCM7xxx).
@@ -152,7 +153,7 @@ config PWM_CROS_EC
config PWM_EP93XX
tristate "Cirrus Logic EP93xx PWM support"
- depends on ARCH_EP93XX
+ depends on ARCH_EP93XX || COMPILE_TEST
help
Generic PWM framework driver for Cirrus Logic EP93xx.
@@ -195,7 +196,7 @@ config PWM_IMG
config PWM_IMX1
tristate "i.MX1 PWM support"
- depends on ARCH_MXC
+ depends on ARCH_MXC || COMPILE_TEST
help
Generic PWM framework driver for i.MX1 and i.MX21
@@ -204,7 +205,7 @@ config PWM_IMX1
config PWM_IMX27
tristate "i.MX27 PWM support"
- depends on ARCH_MXC
+ depends on ARCH_MXC || COMPILE_TEST
help
Generic PWM framework driver for i.MX27 and later i.MX SoCs.
@@ -244,7 +245,7 @@ config PWM_LP3943
config PWM_LPC18XX_SCT
tristate "LPC18xx/43xx PWM/SCT support"
- depends on ARCH_LPC18XX
+ depends on ARCH_LPC18XX || COMPILE_TEST
help
Generic PWM framework driver for NXP LPC18xx PWM/SCT which
supports 16 channels.
@@ -256,7 +257,7 @@ config PWM_LPC18XX_SCT
config PWM_LPC32XX
tristate "LPC32XX PWM support"
- depends on ARCH_LPC32XX
+ depends on ARCH_LPC32XX || COMPILE_TEST
help
Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two
PWM controllers.
@@ -289,7 +290,8 @@ config PWM_LPSS_PLATFORM
config PWM_MESON
tristate "Amlogic Meson PWM driver"
- depends on ARCH_MESON
+ depends on ARCH_MESON || COMPILE_TEST
+ depends on COMMON_CLK
help
The platform driver for Amlogic Meson PWM controller.
@@ -318,7 +320,8 @@ config PWM_MEDIATEK
config PWM_MXS
tristate "Freescale MXS PWM support"
- depends on ARCH_MXS && OF
+ depends on OF
+ depends on ARCH_MXS || COMPILE_TEST
select STMP_DEVICE
help
Generic PWM framework driver for Freescale MXS.
@@ -357,7 +360,7 @@ config PWM_PUV3
config PWM_PXA
tristate "PXA PWM support"
- depends on ARCH_PXA
+ depends on ARCH_PXA || COMPILE_TEST
help
Generic PWM framework driver for PXA.
@@ -388,14 +391,14 @@ config PWM_RENESAS_TPU
config PWM_ROCKCHIP
tristate "Rockchip PWM support"
- depends on ARCH_ROCKCHIP
+ depends on ARCH_ROCKCHIP || COMPILE_TEST
help
Generic PWM framework driver for the PWM controller found on
Rockchip SoCs.
config PWM_SAMSUNG
tristate "Samsung PWM support"
- depends on PLAT_SAMSUNG || ARCH_EXYNOS
+ depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
help
Generic PWM framework driver for Samsung.
@@ -415,7 +418,7 @@ config PWM_SIFIVE
config PWM_SPEAR
tristate "STMicroelectronics SPEAr PWM support"
- depends on PLAT_SPEAR
+ depends on PLAT_SPEAR || COMPILE_TEST
depends on OF
help
Generic PWM framework driver for the PWM controller on ST
@@ -437,7 +440,7 @@ config PWM_SPRD
config PWM_STI
tristate "STiH4xx PWM support"
- depends on ARCH_STI
+ depends on ARCH_STI || COMPILE_TEST
depends on OF
help
Generic PWM framework driver for STiH4xx SoCs.
@@ -447,7 +450,7 @@ config PWM_STI
config PWM_STM32
tristate "STMicroelectronics STM32 PWM"
- depends on MFD_STM32_TIMERS
+ depends on MFD_STM32_TIMERS || COMPILE_TEST
help
Generic PWM framework driver for STM32 SoCs.
@@ -483,7 +486,7 @@ config PWM_SUN4I
config PWM_TEGRA
tristate "NVIDIA Tegra PWM support"
- depends on ARCH_TEGRA
+ depends on ARCH_TEGRA || COMPILE_TEST
help
Generic PWM framework driver for the PWFM controller found on NVIDIA
Tegra SoCs.
@@ -493,7 +496,7 @@ config PWM_TEGRA
config PWM_TIECAP
tristate "ECAP PWM support"
- depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3
+ depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
help
PWM driver support for the ECAP APWM controller found on TI SOCs
@@ -502,7 +505,7 @@ config PWM_TIECAP
config PWM_TIEHRPWM
tristate "EHRPWM PWM support"
- depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_K3
+ depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_K3 || COMPILE_TEST
help
PWM driver support for the EHRPWM controller found on TI SOCs
@@ -529,7 +532,7 @@ config PWM_TWL_LED
config PWM_VT8500
tristate "vt8500 PWM support"
- depends on ARCH_VT8500
+ depends on ARCH_VT8500 || COMPILE_TEST
help
Generic PWM framework driver for vt8500.
@@ -538,7 +541,7 @@ config PWM_VT8500
config PWM_ZX
tristate "ZTE ZX PWM support"
- depends on ARCH_ZX
+ depends on ARCH_ZX || COMPILE_TEST
help
Generic PWM framework driver for ZTE ZX family SoCs.
--
2.17.1
next reply other threads:[~2020-03-03 20:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-03 20:24 Krzysztof Kozlowski [this message]
2020-03-04 6:52 ` [PATCH v2] pwm: Enable compile testing for some of drivers Uwe Kleine-König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200303202447.4245-1-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=claudiu.beznea@microchip.com \
--cc=f.fainelli@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox