From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Esben Haabendal <esben@geanix.com>,
"David S . Miller" <davem@davemloft.net>,
Sasha Levin <sashal@kernel.org>,
netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.4 34/58] net: ll_temac: Handle DMA halt condition caused by buffer underrun
Date: Thu, 5 Mar 2020 12:13:55 -0500 [thread overview]
Message-ID: <20200305171420.29595-34-sashal@kernel.org> (raw)
In-Reply-To: <20200305171420.29595-1-sashal@kernel.org>
From: Esben Haabendal <esben@geanix.com>
[ Upstream commit 1d63b8d66d146deaaedbe16c80de105f685ea012 ]
The SDMA engine used by TEMAC halts operation when it has finished
processing of the last buffer descriptor in the buffer ring.
Unfortunately, no interrupt event is generated when this happens,
so we need to setup another mechanism to make sure DMA operation is
restarted when enough buffers have been added to the ring.
Fixes: 92744989533c ("net: add Xilinx ll_temac device driver")
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/xilinx/ll_temac.h | 3 ++
drivers/net/ethernet/xilinx/ll_temac_main.c | 58 +++++++++++++++++++--
2 files changed, 56 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/ll_temac.h b/drivers/net/ethernet/xilinx/ll_temac.h
index 99fe059e5c7f3..53fb8141f1a67 100644
--- a/drivers/net/ethernet/xilinx/ll_temac.h
+++ b/drivers/net/ethernet/xilinx/ll_temac.h
@@ -380,6 +380,9 @@ struct temac_local {
/* DMA channel control setup */
u32 tx_chnl_ctrl;
u32 rx_chnl_ctrl;
+ u8 coalesce_count_rx;
+
+ struct delayed_work restart_work;
};
/* Wrappers for temac_ior()/temac_iow() function pointers above */
diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index 2e3f59dae586e..eb480204cdbeb 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -51,6 +51,7 @@
#include <linux/ip.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
+#include <linux/workqueue.h>
#include <linux/dma-mapping.h>
#include <linux/processor.h>
#include <linux/platform_data/xilinx-ll-temac.h>
@@ -866,8 +867,11 @@ temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
skb_dma_addr = dma_map_single(ndev->dev.parent, skb->data,
skb_headlen(skb), DMA_TO_DEVICE);
cur_p->len = cpu_to_be32(skb_headlen(skb));
- if (WARN_ON_ONCE(dma_mapping_error(ndev->dev.parent, skb_dma_addr)))
- return NETDEV_TX_BUSY;
+ if (WARN_ON_ONCE(dma_mapping_error(ndev->dev.parent, skb_dma_addr))) {
+ dev_kfree_skb_any(skb);
+ ndev->stats.tx_dropped++;
+ return NETDEV_TX_OK;
+ }
cur_p->phys = cpu_to_be32(skb_dma_addr);
ptr_to_txbd((void *)skb, cur_p);
@@ -897,7 +901,9 @@ temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
dma_unmap_single(ndev->dev.parent,
be32_to_cpu(cur_p->phys),
skb_headlen(skb), DMA_TO_DEVICE);
- return NETDEV_TX_BUSY;
+ dev_kfree_skb_any(skb);
+ ndev->stats.tx_dropped++;
+ return NETDEV_TX_OK;
}
cur_p->phys = cpu_to_be32(skb_dma_addr);
cur_p->len = cpu_to_be32(skb_frag_size(frag));
@@ -920,6 +926,17 @@ temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
return NETDEV_TX_OK;
}
+static int ll_temac_recv_buffers_available(struct temac_local *lp)
+{
+ int available;
+
+ if (!lp->rx_skb[lp->rx_bd_ci])
+ return 0;
+ available = 1 + lp->rx_bd_tail - lp->rx_bd_ci;
+ if (available <= 0)
+ available += RX_BD_NUM;
+ return available;
+}
static void ll_temac_recv(struct net_device *ndev)
{
@@ -990,6 +1007,18 @@ static void ll_temac_recv(struct net_device *ndev)
lp->rx_bd_ci = 0;
} while (rx_bd != lp->rx_bd_tail);
+ /* DMA operations will halt when the last buffer descriptor is
+ * processed (ie. the one pointed to by RX_TAILDESC_PTR).
+ * When that happens, no more interrupt events will be
+ * generated. No IRQ_COAL or IRQ_DLY, and not even an
+ * IRQ_ERR. To avoid stalling, we schedule a delayed work
+ * when there is a potential risk of that happening. The work
+ * will call this function, and thus re-schedule itself until
+ * enough buffers are available again.
+ */
+ if (ll_temac_recv_buffers_available(lp) < lp->coalesce_count_rx)
+ schedule_delayed_work(&lp->restart_work, HZ / 1000);
+
/* Allocate new buffers for those buffer descriptors that were
* passed to network stack. Note that GFP_ATOMIC allocations
* can fail (e.g. when a larger burst of GFP_ATOMIC
@@ -1045,6 +1074,18 @@ static void ll_temac_recv(struct net_device *ndev)
spin_unlock_irqrestore(&lp->rx_lock, flags);
}
+/* Function scheduled to ensure a restart in case of DMA halt
+ * condition caused by running out of buffer descriptors.
+ */
+static void ll_temac_restart_work_func(struct work_struct *work)
+{
+ struct temac_local *lp = container_of(work, struct temac_local,
+ restart_work.work);
+ struct net_device *ndev = lp->ndev;
+
+ ll_temac_recv(ndev);
+}
+
static irqreturn_t ll_temac_tx_irq(int irq, void *_ndev)
{
struct net_device *ndev = _ndev;
@@ -1137,6 +1178,8 @@ static int temac_stop(struct net_device *ndev)
dev_dbg(&ndev->dev, "temac_close()\n");
+ cancel_delayed_work_sync(&lp->restart_work);
+
free_irq(lp->tx_irq, ndev);
free_irq(lp->rx_irq, ndev);
@@ -1269,6 +1312,7 @@ static int temac_probe(struct platform_device *pdev)
lp->dev = &pdev->dev;
lp->options = XTE_OPTION_DEFAULTS;
spin_lock_init(&lp->rx_lock);
+ INIT_DELAYED_WORK(&lp->restart_work, ll_temac_restart_work_func);
/* Setup mutex for synchronization of indirect register access */
if (pdata) {
@@ -1375,6 +1419,7 @@ static int temac_probe(struct platform_device *pdev)
*/
lp->tx_chnl_ctrl = 0x10220000;
lp->rx_chnl_ctrl = 0xff070000;
+ lp->coalesce_count_rx = 0x07;
/* Finished with the DMA node; drop the reference */
of_node_put(dma_np);
@@ -1406,11 +1451,14 @@ static int temac_probe(struct platform_device *pdev)
(pdata->tx_irq_count << 16);
else
lp->tx_chnl_ctrl = 0x10220000;
- if (pdata->rx_irq_timeout || pdata->rx_irq_count)
+ if (pdata->rx_irq_timeout || pdata->rx_irq_count) {
lp->rx_chnl_ctrl = (pdata->rx_irq_timeout << 24) |
(pdata->rx_irq_count << 16);
- else
+ lp->coalesce_count_rx = pdata->rx_irq_count;
+ } else {
lp->rx_chnl_ctrl = 0xff070000;
+ lp->coalesce_count_rx = 0x07;
+ }
}
/* Error handle returned DMA RX and TX interrupts */
--
2.20.1
next prev parent reply other threads:[~2020-03-05 17:19 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-05 17:13 [PATCH AUTOSEL 5.4 01/58] ACPI: watchdog: Allow disabling WDAT at boot Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 02/58] HID: apple: Add support for recent firmware on Magic Keyboards Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 03/58] HID: core: fix off-by-one memset in hid_report_raw_event() Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 04/58] HID: core: increase HID report buffer size to 8KiB Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 05/58] HID: hiddev: Fix race in in hiddev_disconnect() Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 06/58] HID: alps: Fix an error handling path in 'alps_input_configured()' Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 07/58] i2c: altera: Fix potential integer overflow Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 08/58] ACPI: watchdog: Set default timeout in probe Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 09/58] HID: i2c-hid: add Trekstor Surfbook E11B to descriptor override Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 10/58] mips: vdso: fix 'jalr t9' crash in vdso code Sasha Levin
2020-08-29 13:08 ` Hauke Mehrtens
2020-08-29 13:56 ` Sasha Levin
2020-08-29 14:37 ` Hauke Mehrtens
2020-08-30 2:23 ` Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 11/58] MIPS: Disable VDSO time functionality on microMIPS Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 12/58] mips: vdso: add build time check that no 'jalr t9' calls left Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 13/58] MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()' Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 14/58] HID: hid-bigbenff: fix general protection fault caused by double kfree Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 15/58] HID: hid-bigbenff: call hid_hw_stop() in case of error Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 16/58] HID: hid-bigbenff: fix race condition for scheduled work during removal Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 17/58] MIPS: vdso: Wrap -mexplicit-relocs in cc-option Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 18/58] selftests/rseq: Fix out-of-tree compilation Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 19/58] tracing: Fix number printing bug in print_synth_event() Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 20/58] nl80211: fix potential leak in AP start Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 21/58] cfg80211: check reg_rule for NULL in handle_channel_custom() Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 22/58] mac80211: Remove a redundant mutex unlock Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 23/58] scsi: libfc: free response frame from GPN_ID Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 24/58] netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 25/58] netfilter: ipset: Fix forceadd evaluation path Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 26/58] vhost: Check docket sk_family instead of call getname Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 27/58] net: usb: qmi_wwan: restore mtu min/max values after raw_ip switch Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 28/58] hv_netvsc: Fix unwanted wakeup in netvsc_attach() Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 29/58] net: ks8851-ml: Fix IRQ handling and locking Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 30/58] mac80211: rx: avoid RCU list traversal under mutex Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 31/58] net: ll_temac: Fix race condition causing TX hang Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 32/58] net: ll_temac: Add more error handling of dma_map_single() calls Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 33/58] net: ll_temac: Fix RX buffer descriptor handling on GFP_ATOMIC pressure Sasha Levin
2020-03-05 17:13 ` Sasha Levin [this message]
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 35/58] blk-mq: insert passthrough request into hctx->dispatch directly Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 36/58] drm/amdgpu: fix memory leak during TDR test(v2) Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 37/58] kbuild: fix DT binding schema rule to detect command line changes Sasha Levin
2020-03-05 17:13 ` [PATCH AUTOSEL 5.4 38/58] kbuild: add dtbs_check to PHONY Sasha Levin
2020-03-05 17:14 ` [PATCH AUTOSEL 5.4 39/58] kbuild: add dt_binding_check to PHONY in a correct place Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200305171420.29595-34-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=davem@davemloft.net \
--cc=esben@geanix.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox