[PATCH] iio: dac: Kconfig: sort symbols alphabetically

[PATCH] iio: dac: Kconfig: sort symbols alphabetically

[Alexandru Ardelean]

While adding a new device, I noticed these aren't sorted alphabetically [as
in the Makefile], which messed my head-up.
This change sorts the devices alphabetically in the drivers/iio/dac/Kconfig
file as well.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
 drivers/iio/dac/Kconfig | 62 ++++++++++++++++++++---------------------
 1 file changed, 31 insertions(+), 31 deletions(-)

diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index 63916a6142ec..93744011b63f 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -121,27 +121,6 @@ config AD5624R_SPI
 	  Say yes here to build support for Analog Devices AD5624R, AD5644R and
 	  AD5664R converters (DAC). This driver uses the common SPI interface.
 
-config LTC1660
-	tristate "Linear Technology LTC1660/LTC1665 DAC SPI driver"
-	depends on SPI
-	help
-	  Say yes here to build support for Linear Technology
-	  LTC1660 and LTC1665 Digital to Analog Converters.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ltc1660.
-
-config LTC2632
-	tristate "Linear Technology LTC2632-12/10/8 and LTC2636-12/10/8 DAC spi driver"
-	depends on SPI
-	help
-	  Say yes here to build support for Linear Technology
-	  LTC2632-12, LTC2632-10, LTC2632-8, LTC2636-12, LTC2636-10 and
-	  LTC2636-8 converters (DAC).
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ltc2632.
-
 config AD5686
 	tristate
 
@@ -240,16 +219,6 @@ config AD7303
 	  To compile this driver as module choose M here: the module will be called
 	  ad7303.
 
-config CIO_DAC
-	tristate "Measurement Computing CIO-DAC IIO driver"
-	depends on X86 && (ISA_BUS || PC104)
-	select ISA_BUS_API
-	help
-	  Say yes here to build support for the Measurement Computing CIO-DAC
-	  analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The
-	  base port addresses for the devices may be configured via the base
-	  array module parameter.
-
 config AD8801
 	tristate "Analog Devices AD8801/AD8803 DAC driver"
 	depends on SPI_MASTER
@@ -260,6 +229,16 @@ config AD8801
 	  To compile this driver as a module choose M here: the module will be called
 	  ad8801.
 
+config CIO_DAC
+	tristate "Measurement Computing CIO-DAC IIO driver"
+	depends on X86 && (ISA_BUS || PC104)
+	select ISA_BUS_API
+	help
+	  Say yes here to build support for the Measurement Computing CIO-DAC
+	  analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The
+	  base port addresses for the devices may be configured via the base
+	  array module parameter.
+
 config DPOT_DAC
 	tristate "DAC emulation using a DPOT"
 	depends on OF
@@ -289,6 +268,27 @@ config LPC18XX_DAC
 	  To compile this driver as a module, choose M here: the module will be
 	  called lpc18xx_dac.
 
+config LTC1660
+	tristate "Linear Technology LTC1660/LTC1665 DAC SPI driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Linear Technology
+	  LTC1660 and LTC1665 Digital to Analog Converters.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ltc1660.
+
+config LTC2632
+	tristate "Linear Technology LTC2632-12/10/8 and LTC2636-12/10/8 DAC spi driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Linear Technology
+	  LTC2632-12, LTC2632-10, LTC2632-8, LTC2636-12, LTC2636-10 and
+	  LTC2636-8 converters (DAC).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ltc2632.
+
 config M62332
 	tristate "Mitsubishi M62332 DAC driver"
 	depends on I2C
-- 
2.20.1

Re: [PATCH] iio: dac: Kconfig: sort symbols alphabetically

[Jonathan Cameron]

On Wed, 4 Mar 2020 15:55:44 +0200
Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:

> While adding a new device, I noticed these aren't sorted alphabetically [as
> in the Makefile], which messed my head-up.
> This change sorts the devices alphabetically in the drivers/iio/dac/Kconfig
> file as well.
> 
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
oops. That clearly snuck past when I wasn't paying attention.

Good to clean it up.

Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to hopefully not notice!

Thanks,

Jonathan

> ---
>  drivers/iio/dac/Kconfig | 62 ++++++++++++++++++++---------------------
>  1 file changed, 31 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> index 63916a6142ec..93744011b63f 100644
> --- a/drivers/iio/dac/Kconfig
> +++ b/drivers/iio/dac/Kconfig
> @@ -121,27 +121,6 @@ config AD5624R_SPI
>  	  Say yes here to build support for Analog Devices AD5624R, AD5644R and
>  	  AD5664R converters (DAC). This driver uses the common SPI interface.
>  
> -config LTC1660
> -	tristate "Linear Technology LTC1660/LTC1665 DAC SPI driver"
> -	depends on SPI
> -	help
> -	  Say yes here to build support for Linear Technology
> -	  LTC1660 and LTC1665 Digital to Analog Converters.
> -
> -	  To compile this driver as a module, choose M here: the
> -	  module will be called ltc1660.
> -
> -config LTC2632
> -	tristate "Linear Technology LTC2632-12/10/8 and LTC2636-12/10/8 DAC spi driver"
> -	depends on SPI
> -	help
> -	  Say yes here to build support for Linear Technology
> -	  LTC2632-12, LTC2632-10, LTC2632-8, LTC2636-12, LTC2636-10 and
> -	  LTC2636-8 converters (DAC).
> -
> -	  To compile this driver as a module, choose M here: the
> -	  module will be called ltc2632.
> -
>  config AD5686
>  	tristate
>  
> @@ -240,16 +219,6 @@ config AD7303
>  	  To compile this driver as module choose M here: the module will be called
>  	  ad7303.
>  
> -config CIO_DAC
> -	tristate "Measurement Computing CIO-DAC IIO driver"
> -	depends on X86 && (ISA_BUS || PC104)
> -	select ISA_BUS_API
> -	help
> -	  Say yes here to build support for the Measurement Computing CIO-DAC
> -	  analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The
> -	  base port addresses for the devices may be configured via the base
> -	  array module parameter.
> -
>  config AD8801
>  	tristate "Analog Devices AD8801/AD8803 DAC driver"
>  	depends on SPI_MASTER
> @@ -260,6 +229,16 @@ config AD8801
>  	  To compile this driver as a module choose M here: the module will be called
>  	  ad8801.
>  
> +config CIO_DAC
> +	tristate "Measurement Computing CIO-DAC IIO driver"
> +	depends on X86 && (ISA_BUS || PC104)
> +	select ISA_BUS_API
> +	help
> +	  Say yes here to build support for the Measurement Computing CIO-DAC
> +	  analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The
> +	  base port addresses for the devices may be configured via the base
> +	  array module parameter.
> +
>  config DPOT_DAC
>  	tristate "DAC emulation using a DPOT"
>  	depends on OF
> @@ -289,6 +268,27 @@ config LPC18XX_DAC
>  	  To compile this driver as a module, choose M here: the module will be
>  	  called lpc18xx_dac.
>  
> +config LTC1660
> +	tristate "Linear Technology LTC1660/LTC1665 DAC SPI driver"
> +	depends on SPI
> +	help
> +	  Say yes here to build support for Linear Technology
> +	  LTC1660 and LTC1665 Digital to Analog Converters.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called ltc1660.
> +
> +config LTC2632
> +	tristate "Linear Technology LTC2632-12/10/8 and LTC2636-12/10/8 DAC spi driver"
> +	depends on SPI
> +	help
> +	  Say yes here to build support for Linear Technology
> +	  LTC2632-12, LTC2632-10, LTC2632-8, LTC2636-12, LTC2636-10 and
> +	  LTC2636-8 converters (DAC).
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called ltc2632.
> +
>  config M62332
>  	tristate "Mitsubishi M62332 DAC driver"
>  	depends on I2C