From: paulmck@kernel.org
To: linux-kernel@vger.kernel.org, kasan-dev@googlegroups.com,
kernel-team@fb.com, mingo@kernel.org
Cc: elver@google.com, andreyknvl@google.com, glider@google.com,
dvyukov@google.com, cai@lca.pw, boqun.feng@gmail.com,
"Paul E . McKenney" <paulmck@kernel.org>
Subject: [PATCH kcsan 04/32] kcsan: Make KCSAN compatible with lockdep
Date: Mon, 9 Mar 2020 12:03:52 -0700 [thread overview]
Message-ID: <20200309190420.6100-4-paulmck@kernel.org> (raw)
In-Reply-To: <20200309190359.GA5822@paulmck-ThinkPad-P72>
From: Marco Elver <elver@google.com>
We must avoid any recursion into lockdep if KCSAN is enabled on utilities
used by lockdep. One manifestation of this is corruption of lockdep's
IRQ trace state (if TRACE_IRQFLAGS), resulting in spurious warnings
(see below). This commit fixes this by:
1. Using raw_local_irq{save,restore} in kcsan_setup_watchpoint().
2. Disabling lockdep in kcsan_report().
Tested with:
CONFIG_LOCKDEP=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
This fix eliminates spurious warnings such as the following one:
WARNING: CPU: 0 PID: 2 at kernel/locking/lockdep.c:4406 check_flags.part.0+0x101/0x220
Modules linked in:
CPU: 0 PID: 2 Comm: kthreadd Not tainted 5.5.0-rc1+ #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:check_flags.part.0+0x101/0x220
<snip>
Call Trace:
lock_is_held_type+0x69/0x150
freezer_fork+0x20b/0x370
cgroup_post_fork+0x2c9/0x5c0
copy_process+0x2675/0x3b40
_do_fork+0xbe/0xa30
? _raw_spin_unlock_irqrestore+0x40/0x50
? match_held_lock+0x56/0x250
? kthread_park+0xf0/0xf0
kernel_thread+0xa6/0xd0
? kthread_park+0xf0/0xf0
kthreadd+0x321/0x3d0
? kthread_create_on_cpu+0x130/0x130
ret_from_fork+0x3a/0x50
irq event stamp: 64
hardirqs last enabled at (63): [<ffffffff9a7995d0>] _raw_spin_unlock_irqrestore+0x40/0x50
hardirqs last disabled at (64): [<ffffffff992a96d2>] kcsan_setup_watchpoint+0x92/0x460
softirqs last enabled at (32): [<ffffffff990489b8>] fpu__copy+0xe8/0x470
softirqs last disabled at (30): [<ffffffff99048939>] fpu__copy+0x69/0x470
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
---
kernel/kcsan/core.c | 6 ++++--
kernel/kcsan/report.c | 11 +++++++++++
kernel/locking/Makefile | 3 +++
3 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/kernel/kcsan/core.c b/kernel/kcsan/core.c
index 87bf857..64b30f7 100644
--- a/kernel/kcsan/core.c
+++ b/kernel/kcsan/core.c
@@ -336,8 +336,10 @@ kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type)
* CPU-local data accesses), it makes more sense (from a data race
* detection point of view) to simply disable preemptions to ensure
* as many tasks as possible run on other CPUs.
+ *
+ * Use raw versions, to avoid lockdep recursion via IRQ flags tracing.
*/
- local_irq_save(irq_flags);
+ raw_local_irq_save(irq_flags);
watchpoint = insert_watchpoint((unsigned long)ptr, size, is_write);
if (watchpoint == NULL) {
@@ -429,7 +431,7 @@ kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type)
kcsan_counter_dec(KCSAN_COUNTER_USED_WATCHPOINTS);
out_unlock:
- local_irq_restore(irq_flags);
+ raw_local_irq_restore(irq_flags);
out:
user_access_restore(ua_flags);
}
diff --git a/kernel/kcsan/report.c b/kernel/kcsan/report.c
index b5b4fee..33bdf8b 100644
--- a/kernel/kcsan/report.c
+++ b/kernel/kcsan/report.c
@@ -2,6 +2,7 @@
#include <linux/jiffies.h>
#include <linux/kernel.h>
+#include <linux/lockdep.h>
#include <linux/preempt.h>
#include <linux/printk.h>
#include <linux/sched.h>
@@ -410,6 +411,14 @@ void kcsan_report(const volatile void *ptr, size_t size, int access_type,
{
unsigned long flags = 0;
+ /*
+ * With TRACE_IRQFLAGS, lockdep's IRQ trace state becomes corrupted if
+ * we do not turn off lockdep here; this could happen due to recursion
+ * into lockdep via KCSAN if we detect a data race in utilities used by
+ * lockdep.
+ */
+ lockdep_off();
+
kcsan_disable_current();
if (prepare_report(&flags, ptr, size, access_type, cpu_id, type)) {
if (print_report(ptr, size, access_type, value_change, cpu_id, type) && panic_on_warn)
@@ -418,4 +427,6 @@ void kcsan_report(const volatile void *ptr, size_t size, int access_type,
release_report(&flags, type);
}
kcsan_enable_current();
+
+ lockdep_on();
}
diff --git a/kernel/locking/Makefile b/kernel/locking/Makefile
index 45452fa..6d11cfb 100644
--- a/kernel/locking/Makefile
+++ b/kernel/locking/Makefile
@@ -5,6 +5,9 @@ KCOV_INSTRUMENT := n
obj-y += mutex.o semaphore.o rwsem.o percpu-rwsem.o
+# Avoid recursion lockdep -> KCSAN -> ... -> lockdep.
+KCSAN_SANITIZE_lockdep.o := n
+
ifdef CONFIG_FUNCTION_TRACER
CFLAGS_REMOVE_lockdep.o = $(CC_FLAGS_FTRACE)
CFLAGS_REMOVE_lockdep_proc.o = $(CC_FLAGS_FTRACE)
--
2.9.5
next prev parent reply other threads:[~2020-03-09 19:06 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-09 19:03 [PATCH kcsan 0/32] KCSAN commits for v5.7 Paul E. McKenney
2020-03-09 19:03 ` [PATCH kcsan 01/32] kcsan: Prefer __always_inline for fast-path paulmck
2020-03-09 19:03 ` [PATCH kcsan 02/32] kcsan: Show full access type in report paulmck
2020-03-09 19:03 ` [PATCH kcsan 03/32] kcsan: Rate-limit reporting per data races paulmck
2020-03-09 19:03 ` paulmck [this message]
2020-03-09 19:03 ` [PATCH kcsan 05/32] kcsan: Address missing case with KCSAN_REPORT_VALUE_CHANGE_ONLY paulmck
2020-03-09 19:03 ` [PATCH kcsan 06/32] include/linux: Add instrumented.h infrastructure paulmck
2020-03-09 19:03 ` [PATCH kcsan 07/32] asm-generic, atomic-instrumented: Use generic instrumented.h paulmck
2020-03-09 19:03 ` [PATCH kcsan 08/32] asm-generic, kcsan: Add KCSAN instrumentation for bitops paulmck
2020-03-09 19:03 ` [PATCH kcsan 09/32] iov_iter: Use generic instrumented.h paulmck
2020-03-09 19:03 ` [PATCH kcsan 10/32] copy_to_user, copy_from_user: " paulmck
2020-03-09 19:03 ` [PATCH kcsan 11/32] kcsan: Add docbook header for data_race() paulmck
2020-03-09 19:04 ` [PATCH kcsan 12/32] kcsan: Add option to assume plain aligned writes up to word size are atomic paulmck
2020-03-09 19:04 ` [PATCH kcsan 13/32] kcsan: Clarify Kconfig option KCSAN_IGNORE_ATOMICS paulmck
2020-03-09 19:04 ` [PATCH kcsan 14/32] kcsan: Cleanup of main KCSAN Kconfig option paulmck
2020-03-09 19:04 ` [PATCH kcsan 15/32] kcsan: Fix 0-sized checks paulmck
2020-03-09 19:04 ` [PATCH kcsan 16/32] kcsan: Introduce KCSAN_ACCESS_ASSERT access type paulmck
2020-03-09 19:04 ` [PATCH kcsan 17/32] kcsan: Introduce ASSERT_EXCLUSIVE_* macros paulmck
2020-03-13 8:52 ` Boqun Feng
2020-03-13 16:15 ` Marco Elver
2020-03-14 2:22 ` Boqun Feng
2020-03-17 11:12 ` Marco Elver
2020-03-19 3:23 ` Boqun Feng
2020-03-20 14:49 ` Marco Elver
2020-03-09 19:04 ` [PATCH kcsan 18/32] kcsan: Add test to generate conflicts via debugfs paulmck
2020-03-09 19:04 ` [PATCH kcsan 19/32] kcsan: Expose core configuration parameters as module params paulmck
2020-03-09 19:04 ` [PATCH kcsan 20/32] kcsan: Fix misreporting if concurrent races on same address paulmck
2020-03-09 19:04 ` [PATCH kcsan 21/32] kcsan: Move interfaces that affects checks to kcsan-checks.h paulmck
2020-03-09 19:04 ` [PATCH kcsan 22/32] compiler.h, seqlock.h: Remove unnecessary kcsan.h includes paulmck
2020-03-09 19:04 ` [PATCH kcsan 23/32] kcsan: Introduce kcsan_value_change type paulmck
2020-03-09 19:04 ` [PATCH kcsan 24/32] kcsan: Add kcsan_set_access_mask() support paulmck
2020-03-09 19:04 ` [PATCH kcsan 25/32] kcsan: Introduce ASSERT_EXCLUSIVE_BITS(var, mask) paulmck
2020-03-09 19:04 ` [PATCH kcsan 26/32] kcsan, trace: Make KCSAN compatible with tracing paulmck
2020-03-09 19:57 ` Steven Rostedt
2020-03-09 20:27 ` Paul E. McKenney
2020-03-09 19:04 ` [PATCH kcsan 27/32] kcsan: Add option to allow watcher interruptions paulmck
2020-03-12 18:03 ` Paul E. McKenney
2020-03-12 18:04 ` Paul E. McKenney
2020-03-13 15:28 ` Marco Elver
2020-03-16 13:56 ` Marco Elver
2020-03-16 15:45 ` Paul E. McKenney
2020-03-16 16:22 ` Marco Elver
2020-03-17 17:13 ` Paul E. McKenney
2020-03-17 17:44 ` Marco Elver
2020-03-18 17:42 ` Marco Elver
2020-03-09 19:04 ` [PATCH kcsan 28/32] kcsan: Add option for verbose reporting paulmck
2020-03-09 19:04 ` [PATCH kcsan 29/32] kcsan: Add current->state to implicitly atomic accesses paulmck
2020-03-09 19:04 ` [PATCH kcsan 30/32] kcsan: Fix a typo in a comment paulmck
2020-03-09 19:04 ` [PATCH kcsan 31/32] kcsan: Update Documentation/dev-tools/kcsan.rst paulmck
2020-03-09 19:04 ` [PATCH kcsan 32/32] kcsan: Update API documentation in kcsan-checks.h paulmck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200309190420.6100-4-paulmck@kernel.org \
--to=paulmck@kernel.org \
--cc=andreyknvl@google.com \
--cc=boqun.feng@gmail.com \
--cc=cai@lca.pw \
--cc=dvyukov@google.com \
--cc=elver@google.com \
--cc=glider@google.com \
--cc=kasan-dev@googlegroups.com \
--cc=kernel-team@fb.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox