Re: [PATCH 3/5] iio: adc: mp2629: Add support for mp2629 ADC driver

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Thu, Mar 12, 2020 at 06:26:47PM +0100, Saravanan Sekar wrote:
> Add support for 8-bit resolution ADC readings for input power
> supply and battery charging measurement. Provides voltage, current
> readings to mp2629 power supply driver.

...

> +	struct mp2629_info *info = adc_info->info;
> +	unsigned int rval;
> +	int ret;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		ret = mp2629_get_value(info->regmap, chan->address, &rval);
> +		if (ret < 0)
> +			return ret;
> +
> +		if (chan->address == MP2629_INPUT_VOLT)
> +			rval &= 0x7f;
> +		*val = rval;
> +		return IIO_VAL_INT;
> +
> +	case IIO_CHAN_INFO_SCALE:
> +		switch (chan->channel) {
> +		case MP2629_BATT_VOLT:
> +		case MP2629_SYSTEM_VOLT:
> +			*val = 20;
> +			return IIO_VAL_INT;
> +
> +		case MP2629_INPUT_VOLT:
> +			*val = 60;
> +			return IIO_VAL_INT;
> +
> +		case MP2629_BATT_CURRENT:
> +			*val = 175;
> +			*val2 = 10;
> +			return IIO_VAL_FRACTIONAL;
> +
> +		case MP2629_INPUT_CURRENT:
> +			*val = 133;
> +			*val2 = 10;
> +			return IIO_VAL_FRACTIONAL;
> +		}
> +		break;
> +
> +	default:

> +		ret = -EINVAL;
> +		break;

return -EINVAL;

> +	}
> +

> +	return ret;

	return 0;
?

What is default case for wrong channel in INFO_SCALE?

> +}

...

> +static const struct of_device_id mp2629_adc_of_match[] = {
> +	{ .compatible = "mps,mp2629_adc"},

> +	{},

No comma needed.

> +};

-- 
With Best Regards,
Andy Shevchenko