From: Jonathan Cameron <jic23@kernel.org>
To: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<lars@metafoo.de>
Subject: Re: [PATCH v2 2/5] iio: adc: ad7791: define/use own IIO channel macros
Date: Sat, 21 Mar 2020 16:51:57 +0000 [thread overview]
Message-ID: <20200321165157.7f3f5623@archlinux> (raw)
In-Reply-To: <20200321090802.11537-2-alexandru.ardelean@analog.com>
On Sat, 21 Mar 2020 11:07:59 +0200
Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
> This driver seems to use most of the AD_SD_*_CHANNEL. This change will move
> them in the driver. The intent is that if a new part comes along which
> would require tweaks per IIO channel, these should be doable in the driver.
>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Applied, thanks
Jonathan
> ---
> drivers/iio/adc/ad7791.c | 62 +++++++++++++++++++++++++++++++++++-----
> 1 file changed, 55 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/iio/adc/ad7791.c b/drivers/iio/adc/ad7791.c
> index abb239392631..ba22808507d0 100644
> --- a/drivers/iio/adc/ad7791.c
> +++ b/drivers/iio/adc/ad7791.c
> @@ -64,25 +64,73 @@
> #define AD7791_MODE_SEL_MASK (0x3 << 6)
> #define AD7791_MODE_SEL(x) ((x) << 6)
>
> +#define __AD7991_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
> + _storagebits, _shift, _extend_name, _type, _mask_all) \
> + { \
> + .type = (_type), \
> + .differential = (_channel2 == -1 ? 0 : 1), \
> + .indexed = 1, \
> + .channel = (_channel1), \
> + .channel2 = (_channel2), \
> + .address = (_address), \
> + .extend_name = (_extend_name), \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(IIO_CHAN_INFO_OFFSET), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> + .info_mask_shared_by_all = _mask_all, \
> + .scan_index = (_si), \
> + .scan_type = { \
> + .sign = 'u', \
> + .realbits = (_bits), \
> + .storagebits = (_storagebits), \
> + .shift = (_shift), \
> + .endianness = IIO_BE, \
> + }, \
> + }
> +
> +#define AD7991_SHORTED_CHANNEL(_si, _channel, _address, _bits, \
> + _storagebits, _shift) \
> + __AD7991_CHANNEL(_si, _channel, _channel, _address, _bits, \
> + _storagebits, _shift, "shorted", IIO_VOLTAGE, \
> + BIT(IIO_CHAN_INFO_SAMP_FREQ))
> +
> +#define AD7991_CHANNEL(_si, _channel, _address, _bits, \
> + _storagebits, _shift) \
> + __AD7991_CHANNEL(_si, _channel, -1, _address, _bits, \
> + _storagebits, _shift, NULL, IIO_VOLTAGE, \
> + BIT(IIO_CHAN_INFO_SAMP_FREQ))
> +
> +#define AD7991_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
> + _storagebits, _shift) \
> + __AD7991_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
> + _storagebits, _shift, NULL, IIO_VOLTAGE, \
> + BIT(IIO_CHAN_INFO_SAMP_FREQ))
> +
> +#define AD7991_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \
> + _shift) \
> + __AD7991_CHANNEL(_si, _channel, -1, _address, _bits, \
> + _storagebits, _shift, "supply", IIO_VOLTAGE, \
> + BIT(IIO_CHAN_INFO_SAMP_FREQ))
> +
> #define DECLARE_AD7787_CHANNELS(name, bits, storagebits) \
> const struct iio_chan_spec name[] = { \
> - AD_SD_DIFF_CHANNEL(0, 0, 0, AD7791_CH_AIN1P_AIN1N, \
> + AD7991_DIFF_CHANNEL(0, 0, 0, AD7791_CH_AIN1P_AIN1N, \
> (bits), (storagebits), 0), \
> - AD_SD_CHANNEL(1, 1, AD7791_CH_AIN2, (bits), (storagebits), 0), \
> - AD_SD_SHORTED_CHANNEL(2, 0, AD7791_CH_AIN1N_AIN1N, \
> + AD7991_CHANNEL(1, 1, AD7791_CH_AIN2, (bits), (storagebits), 0), \
> + AD7991_SHORTED_CHANNEL(2, 0, AD7791_CH_AIN1N_AIN1N, \
> (bits), (storagebits), 0), \
> - AD_SD_SUPPLY_CHANNEL(3, 2, AD7791_CH_AVDD_MONITOR, \
> + AD7991_SUPPLY_CHANNEL(3, 2, AD7791_CH_AVDD_MONITOR, \
> (bits), (storagebits), 0), \
> IIO_CHAN_SOFT_TIMESTAMP(4), \
> }
>
> #define DECLARE_AD7791_CHANNELS(name, bits, storagebits) \
> const struct iio_chan_spec name[] = { \
> - AD_SD_DIFF_CHANNEL(0, 0, 0, AD7791_CH_AIN1P_AIN1N, \
> + AD7991_DIFF_CHANNEL(0, 0, 0, AD7791_CH_AIN1P_AIN1N, \
> (bits), (storagebits), 0), \
> - AD_SD_SHORTED_CHANNEL(1, 0, AD7791_CH_AIN1N_AIN1N, \
> + AD7991_SHORTED_CHANNEL(1, 0, AD7791_CH_AIN1N_AIN1N, \
> (bits), (storagebits), 0), \
> - AD_SD_SUPPLY_CHANNEL(2, 1, AD7791_CH_AVDD_MONITOR, \
> + AD7991_SUPPLY_CHANNEL(2, 1, AD7791_CH_AVDD_MONITOR, \
> (bits), (storagebits), 0), \
> IIO_CHAN_SOFT_TIMESTAMP(3), \
> }
next prev parent reply other threads:[~2020-03-21 16:52 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-21 9:07 [PATCH v2 1/5] iio: adc: ad7780: define/use own IIO channel macros Alexandru Ardelean
2020-03-21 9:07 ` [PATCH v2 2/5] iio: adc: ad7791: " Alexandru Ardelean
2020-03-21 16:51 ` Jonathan Cameron [this message]
2020-03-21 9:08 ` [PATCH v2 3/5] iio: adc: ad7793: " Alexandru Ardelean
2020-03-21 16:52 ` Jonathan Cameron
2020-03-21 9:08 ` [PATCH v2 4/5] iio: ad_sigma_delta: remove unused " Alexandru Ardelean
2020-03-21 16:53 ` Jonathan Cameron
2020-03-21 9:08 ` [PATCH v2 5/5] iio: adc: ad7793: use read_avail iio hook for scale available Alexandru Ardelean
2020-03-21 16:57 ` Jonathan Cameron
2020-03-22 9:38 ` Ardelean, Alexandru
2020-03-21 19:37 ` Andy Shevchenko
2020-03-22 9:18 ` Ardelean, Alexandru
2020-03-22 15:15 ` Jonathan Cameron
2020-03-21 16:50 ` [PATCH v2 1/5] iio: adc: ad7780: define/use own IIO channel macros Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200321165157.7f3f5623@archlinux \
--to=jic23@kernel.org \
--cc=alexandru.ardelean@analog.com \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox