* [PATCH v8 01/19] platform/x86: intel_scu_ipc: Split out SCU IPC functionality from the SCU driver
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-20 13:36 ` Lee Jones
2020-03-03 13:36 ` [PATCH v8 02/19] platform/x86: intel_scu_ipc: Log more information if SCU IPC command fails Mika Westerberg
` (18 subsequent siblings)
19 siblings, 1 reply; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
The SCU IPC functionality is usable outside of Intel MID devices. For
example modern Intel CPUs include the same thing but now it is called
PMC (Power Management Controller) instead of SCU. To make the IPC
available for those split the driver into core part (intel_scu_ipc.c)
and the SCU PCI driver part (intel_scu_pcidrv.c) which then calls the
former before it goes and creates rest of the SCU devices. The SCU IPC
will also register a new class that gets assigned to the device that is
created under the parent PCI device.
We also split the Kconfig symbols so that INTEL_SCU_IPC enables the SCU
IPC library and INTEL_SCU_PCI the SCU driver and convert the users
accordingly. While there remove default y from the INTEL_SCU_PCI symbol
as it is already selected by X86_INTEL_MID.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
arch/x86/Kconfig | 2 +-
arch/x86/include/asm/intel_scu_ipc.h | 18 +++
drivers/mfd/Kconfig | 4 +-
drivers/platform/x86/Kconfig | 24 ++--
drivers/platform/x86/Makefile | 1 +
drivers/platform/x86/intel_scu_ipc.c | 172 ++++++++++++++++--------
drivers/platform/x86/intel_scu_pcidrv.c | 55 ++++++++
7 files changed, 208 insertions(+), 68 deletions(-)
create mode 100644 drivers/platform/x86/intel_scu_pcidrv.c
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index beea77046f9b..66a056f221bb 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -598,7 +598,7 @@ config X86_INTEL_MID
select I2C
select DW_APB_TIMER
select APB_TIMER
- select INTEL_SCU_IPC
+ select INTEL_SCU_PCI
select MFD_INTEL_MSIC
---help---
Select to build a kernel capable of supporting Intel MID (Mobile
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
index 2a1442ba6e78..c53d18f9440b 100644
--- a/arch/x86/include/asm/intel_scu_ipc.h
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -2,6 +2,7 @@
#ifndef _ASM_X86_INTEL_SCU_IPC_H_
#define _ASM_X86_INTEL_SCU_IPC_H_
+#include <linux/ioport.h>
#include <linux/notifier.h>
#define IPCMSG_INDIRECT_READ 0x02
@@ -19,6 +20,23 @@
#define IPC_CMD_VRTC_SETTIME 1 /* Set time */
#define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */
+struct device;
+struct intel_scu_ipc_dev;
+
+/**
+ * struct intel_scu_ipc_data - Data used to configure SCU IPC
+ * @mem: Base address of SCU IPC MMIO registers
+ * @irq: The IRQ number used for SCU (optional)
+ */
+struct intel_scu_ipc_data {
+ struct resource mem;
+ int irq;
+};
+
+struct intel_scu_ipc_dev *
+intel_scu_ipc_register(struct device *parent,
+ const struct intel_scu_ipc_data *scu_data);
+
/* Read single register */
int intel_scu_ipc_ioread8(u16 addr, u8 *data);
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2b203290e7b9..20b294ef2873 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -593,7 +593,7 @@ config INTEL_SOC_PMIC_MRFLD
tristate "Support for Intel Merrifield Basin Cove PMIC"
depends on GPIOLIB
depends on ACPI
- depends on INTEL_SCU_IPC
+ depends on INTEL_SCU
select MFD_CORE
select REGMAP_IRQ
help
@@ -625,7 +625,7 @@ config MFD_INTEL_LPSS_PCI
config MFD_INTEL_MSIC
bool "Intel MSIC"
- depends on INTEL_SCU_IPC
+ depends on INTEL_SCU
select MFD_CORE
help
Select this option to enable access to Intel MSIC (Avatele
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index ae75b19e8649..964ac735245d 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1287,7 +1287,7 @@ config INTEL_MFLD_THERMAL
config INTEL_MID_POWER_BUTTON
tristate "power button driver for Intel MID platforms"
- depends on INTEL_SCU_IPC && INPUT
+ depends on INTEL_SCU && INPUT
help
This driver handles the power button on the Intel MID platforms.
@@ -1334,17 +1334,25 @@ config INTEL_PUNIT_IPC
which is used to bridge the communications between kernel and P-Unit.
config INTEL_SCU_IPC
- bool "Intel SCU IPC Support"
+ bool
+
+config INTEL_SCU
+ bool
+ select INTEL_SCU_IPC
+
+config INTEL_SCU_PCI
+ bool "Intel SCU PCI driver"
depends on X86_INTEL_MID
- default y
- ---help---
- IPC is used to bridge the communications between kernel and SCU on
- some embedded Intel x86 platforms. This is not needed for PC-type
- machines.
+ select INTEL_SCU
+ help
+ This driver is used to bridge the communications between kernel
+ and SCU on some embedded Intel x86 platforms. It also creates
+ devices that are connected to the SoC through the SCU. This is
+ not needed for PC-type machines.
config INTEL_SCU_IPC_UTIL
tristate "Intel SCU IPC utility driver"
- depends on INTEL_SCU_IPC
+ depends on INTEL_SCU
---help---
The IPC Util driver provides an interface with the SCU enabling
low level access for debug work and updating the firmware. Say
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 2ecd08783a73..a750bd8c1e81 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -140,6 +140,7 @@ obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o intel_pmc_core_pltdrv.o
obj-$(CONFIG_INTEL_PMC_IPC) += intel_pmc_ipc.o
obj-$(CONFIG_INTEL_PUNIT_IPC) += intel_punit_ipc.o
obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o
+obj-$(CONFIG_INTEL_SCU_PCI) += intel_scu_pcidrv.o
obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o
obj-$(CONFIG_INTEL_TELEMETRY) += intel_telemetry_core.o \
intel_telemetry_pltdrv.o \
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 3d7da5266136..584e33c37708 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -18,11 +18,10 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/sfi.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/slab.h>
-#include <asm/intel-mid.h>
#include <asm/intel_scu_ipc.h>
/* IPC defines the following message types */
@@ -55,14 +54,13 @@
#define IPC_IOC 0x100 /* IPC command register IOC bit */
struct intel_scu_ipc_dev {
- struct device *dev;
+ struct device dev;
+ struct resource mem;
+ int irq;
void __iomem *ipc_base;
struct completion cmd_complete;
- u8 irq_mode;
};
-static struct intel_scu_ipc_dev ipcdev; /* Only one for now */
-
#define IPC_STATUS 0x04
#define IPC_STATUS_IRQ BIT(2)
#define IPC_STATUS_ERR BIT(1)
@@ -78,8 +76,14 @@ static struct intel_scu_ipc_dev ipcdev; /* Only one for now */
/* Timeout in jiffies */
#define IPC_TIMEOUT (3 * HZ)
+static struct intel_scu_ipc_dev *ipcdev; /* Only one for now */
static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */
+static struct class intel_scu_ipc_class = {
+ .name = "intel_scu_ipc",
+ .owner = THIS_MODULE,
+};
+
/*
* Send ipc command
* Command Register (Write Only):
@@ -143,7 +147,7 @@ static inline int busy_loop(struct intel_scu_ipc_dev *scu)
usleep_range(50, 100);
} while (time_before(jiffies, end));
- dev_err(scu->dev, "IPC timed out");
+ dev_err(&scu->dev, "IPC timed out");
return -ETIMEDOUT;
}
@@ -153,7 +157,7 @@ static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu)
int status;
if (!wait_for_completion_timeout(&scu->cmd_complete, IPC_TIMEOUT)) {
- dev_err(scu->dev, "IPC timed out\n");
+ dev_err(&scu->dev, "IPC timed out\n");
return -ETIMEDOUT;
}
@@ -166,13 +170,13 @@ static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu)
static int intel_scu_ipc_check_status(struct intel_scu_ipc_dev *scu)
{
- return scu->irq_mode ? ipc_wait_for_interrupt(scu) : busy_loop(scu);
+ return scu->irq > 0 ? ipc_wait_for_interrupt(scu) : busy_loop(scu);
}
/* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
{
- struct intel_scu_ipc_dev *scu = &ipcdev;
+ struct intel_scu_ipc_dev *scu;
int nc;
u32 offset = 0;
int err;
@@ -182,11 +186,11 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
memset(cbuf, 0, sizeof(cbuf));
mutex_lock(&ipclock);
-
- if (scu->dev == NULL) {
+ if (!ipcdev) {
mutex_unlock(&ipclock);
return -ENODEV;
}
+ scu = ipcdev;
for (nc = 0; nc < count; nc++, offset += 2) {
cbuf[offset] = addr[nc];
@@ -326,14 +330,15 @@ EXPORT_SYMBOL(intel_scu_ipc_update_register);
*/
int intel_scu_ipc_simple_command(int cmd, int sub)
{
- struct intel_scu_ipc_dev *scu = &ipcdev;
+ struct intel_scu_ipc_dev *scu;
int err;
mutex_lock(&ipclock);
- if (scu->dev == NULL) {
+ if (!ipcdev) {
mutex_unlock(&ipclock);
return -ENODEV;
}
+ scu = ipcdev;
ipc_command(scu, sub << 12 | cmd);
err = intel_scu_ipc_check_status(scu);
mutex_unlock(&ipclock);
@@ -356,14 +361,15 @@ EXPORT_SYMBOL(intel_scu_ipc_simple_command);
int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
u32 *out, int outlen)
{
- struct intel_scu_ipc_dev *scu = &ipcdev;
+ struct intel_scu_ipc_dev *scu;
int i, err;
mutex_lock(&ipclock);
- if (scu->dev == NULL) {
+ if (!ipcdev) {
mutex_unlock(&ipclock);
return -ENODEV;
}
+ scu = ipcdev;
for (i = 0; i < inlen; i++)
ipc_data_writel(scu, *in++, 4 * i);
@@ -399,61 +405,113 @@ static irqreturn_t ioc(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static void intel_scu_ipc_release(struct device *dev)
+{
+ struct intel_scu_ipc_dev *scu;
+
+ scu = container_of(dev, struct intel_scu_ipc_dev, dev);
+ if (scu->irq > 0)
+ free_irq(scu->irq, scu);
+ iounmap(scu->ipc_base);
+ release_mem_region(scu->mem.start, resource_size(&scu->mem));
+ kfree(scu);
+}
+
/**
- * ipc_probe - probe an Intel SCU IPC
- * @pdev: the PCI device matching
- * @id: entry in the match table
+ * intel_scu_ipc_register() - Register SCU IPC device
+ * @parent: Parent device
+ * @scu_data: Data used to configure SCU IPC
*
- * Enable and install an intel SCU IPC. This appears in the PCI space
- * but uses some hard coded addresses as well.
+ * Call this function to register SCU IPC mechanism under @parent.
+ * Returns pointer to the new SCU IPC device or ERR_PTR() in case of
+ * failure.
*/
-static int ipc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+struct intel_scu_ipc_dev *
+intel_scu_ipc_register(struct device *parent,
+ const struct intel_scu_ipc_data *scu_data)
{
int err;
- struct intel_scu_ipc_dev *scu = &ipcdev;
+ struct intel_scu_ipc_dev *scu;
+ void __iomem *ipc_base;
- if (scu->dev) /* We support only one SCU */
- return -EBUSY;
+ mutex_lock(&ipclock);
+ /* We support only one IPC */
+ if (ipcdev) {
+ err = -EBUSY;
+ goto err_unlock;
+ }
- err = pcim_enable_device(pdev);
- if (err)
- return err;
+ scu = kzalloc(sizeof(*scu), GFP_KERNEL);
+ if (!scu) {
+ err = -ENOMEM;
+ goto err_unlock;
+ }
- err = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
- if (err)
- return err;
+ scu->dev.parent = parent;
+ scu->dev.class = &intel_scu_ipc_class;
+ scu->dev.release = intel_scu_ipc_release;
+ dev_set_name(&scu->dev, "intel_scu_ipc");
+ if (!request_mem_region(scu_data->mem.start, resource_size(&scu_data->mem),
+ "intel_scu_ipc")) {
+ err = -EBUSY;
+ goto err_free;
+ }
+
+ ipc_base = ioremap(scu_data->mem.start, resource_size(&scu_data->mem));
+ if (!ipc_base) {
+ err = -ENOMEM;
+ goto err_release;
+ }
+
+ scu->ipc_base = ipc_base;
+ scu->mem = scu_data->mem;
+ scu->irq = scu_data->irq;
init_completion(&scu->cmd_complete);
- scu->ipc_base = pcim_iomap_table(pdev)[0];
+ if (scu->irq > 0) {
+ err = request_irq(scu->irq, ioc, 0, "intel_scu_ipc", scu);
+ if (err)
+ goto err_unmap;
+ }
- err = devm_request_irq(&pdev->dev, pdev->irq, ioc, 0, "intel_scu_ipc",
- scu);
- if (err)
- return err;
+ /*
+ * After this point intel_scu_ipc_release() takes care of
+ * releasing the SCU IPC resources once refcount drops to zero.
+ */
+ err = device_register(&scu->dev);
+ if (err) {
+ put_device(&scu->dev);
+ goto err_unlock;
+ }
/* Assign device at last */
- scu->dev = &pdev->dev;
+ ipcdev = scu;
+ mutex_unlock(&ipclock);
- intel_scu_devices_create();
+ return scu;
- pci_set_drvdata(pdev, scu);
- return 0;
+err_unmap:
+ iounmap(ipc_base);
+err_release:
+ release_mem_region(scu_data->mem.start, resource_size(&scu_data->mem));
+err_free:
+ kfree(scu);
+err_unlock:
+ mutex_unlock(&ipclock);
+
+ return ERR_PTR(err);
}
+EXPORT_SYMBOL_GPL(intel_scu_ipc_register);
-static const struct pci_device_id pci_ids[] = {
- { PCI_VDEVICE(INTEL, 0x080e) },
- { PCI_VDEVICE(INTEL, 0x08ea) },
- { PCI_VDEVICE(INTEL, 0x11a0) },
- {}
-};
+static int __init intel_scu_ipc_init(void)
+{
+ return class_register(&intel_scu_ipc_class);
+}
+subsys_initcall(intel_scu_ipc_init);
-static struct pci_driver ipc_driver = {
- .driver = {
- .suppress_bind_attrs = true,
- },
- .name = "intel_scu_ipc",
- .id_table = pci_ids,
- .probe = ipc_probe,
-};
-builtin_pci_driver(ipc_driver);
+static void __exit intel_scu_ipc_exit(void)
+{
+ class_unregister(&intel_scu_ipc_class);
+}
+module_exit(intel_scu_ipc_exit);
diff --git a/drivers/platform/x86/intel_scu_pcidrv.c b/drivers/platform/x86/intel_scu_pcidrv.c
new file mode 100644
index 000000000000..b869ec2eda0e
--- /dev/null
+++ b/drivers/platform/x86/intel_scu_pcidrv.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCI driver for the Intel SCU.
+ *
+ * Copyright (C) 2008-2010, 2015, 2020 Intel Corporation
+ * Authors: Sreedhara DS (sreedhara.ds@intel.com)
+ * Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/intel-mid.h>
+#include <asm/intel_scu_ipc.h>
+
+static int intel_scu_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct intel_scu_ipc_data scu_data = {};
+ struct intel_scu_ipc_dev *scu;
+ int ret;
+
+ ret = pcim_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ scu_data.mem = pdev->resource[0];
+ scu_data.irq = pdev->irq;
+
+ scu = intel_scu_ipc_register(&pdev->dev, &scu_data);
+ if (IS_ERR(scu))
+ return PTR_ERR(scu);
+
+ intel_scu_devices_create();
+ return 0;
+}
+
+static const struct pci_device_id pci_ids[] = {
+ { PCI_VDEVICE(INTEL, 0x080e) },
+ { PCI_VDEVICE(INTEL, 0x08ea) },
+ { PCI_VDEVICE(INTEL, 0x11a0) },
+ {}
+};
+
+static struct pci_driver intel_scu_pci_driver = {
+ .driver = {
+ .suppress_bind_attrs = true,
+ },
+ .name = "intel_scu",
+ .id_table = pci_ids,
+ .probe = intel_scu_pci_probe,
+};
+
+builtin_pci_driver(intel_scu_pci_driver);
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* Re: [PATCH v8 01/19] platform/x86: intel_scu_ipc: Split out SCU IPC functionality from the SCU driver
2020-03-03 13:36 ` [PATCH v8 01/19] platform/x86: intel_scu_ipc: Split out SCU IPC functionality from the SCU driver Mika Westerberg
@ 2020-03-20 13:36 ` Lee Jones
0 siblings, 0 replies; 28+ messages in thread
From: Lee Jones @ 2020-03-20 13:36 UTC (permalink / raw)
To: Mika Westerberg
Cc: Andy Shevchenko, Darren Hart, Greg Kroah-Hartman, Thomas Gleixner,
Ingo Molnar, Borislav Petkov, H . Peter Anvin, x86, Zha Qipeng,
David E . Box, Guenter Roeck, Heikki Krogerus, Wim Van Sebroeck,
platform-driver-x86, linux-kernel
On Tue, 03 Mar 2020, Mika Westerberg wrote:
> The SCU IPC functionality is usable outside of Intel MID devices. For
> example modern Intel CPUs include the same thing but now it is called
> PMC (Power Management Controller) instead of SCU. To make the IPC
> available for those split the driver into core part (intel_scu_ipc.c)
> and the SCU PCI driver part (intel_scu_pcidrv.c) which then calls the
> former before it goes and creates rest of the SCU devices. The SCU IPC
> will also register a new class that gets assigned to the device that is
> created under the parent PCI device.
>
> We also split the Kconfig symbols so that INTEL_SCU_IPC enables the SCU
> IPC library and INTEL_SCU_PCI the SCU driver and convert the users
> accordingly. While there remove default y from the INTEL_SCU_PCI symbol
> as it is already selected by X86_INTEL_MID.
>
> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> arch/x86/Kconfig | 2 +-
> arch/x86/include/asm/intel_scu_ipc.h | 18 +++
> drivers/mfd/Kconfig | 4 +-
For my own reference:
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> drivers/platform/x86/Kconfig | 24 ++--
> drivers/platform/x86/Makefile | 1 +
> drivers/platform/x86/intel_scu_ipc.c | 172 ++++++++++++++++--------
> drivers/platform/x86/intel_scu_pcidrv.c | 55 ++++++++
> 7 files changed, 208 insertions(+), 68 deletions(-)
> create mode 100644 drivers/platform/x86/intel_scu_pcidrv.c
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v8 02/19] platform/x86: intel_scu_ipc: Log more information if SCU IPC command fails
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 01/19] platform/x86: intel_scu_ipc: Split out SCU IPC functionality from the SCU driver Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 03/19] platform/x86: intel_scu_ipc: Move legacy SCU IPC API to a separate header Mika Westerberg
` (17 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
Currently we only log an error if the command times out which makes it
hard to figure out the failing command. This changes the driver to log
command and subcommand with the error code which should make debugging
easier. This also allows us to simplify the callers as they don't need
to log these errors themselves.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/platform/x86/intel_scu_ipc.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 584e33c37708..e8ea250aeda3 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -147,7 +147,6 @@ static inline int busy_loop(struct intel_scu_ipc_dev *scu)
usleep_range(50, 100);
} while (time_before(jiffies, end));
- dev_err(&scu->dev, "IPC timed out");
return -ETIMEDOUT;
}
@@ -156,10 +155,8 @@ static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu)
{
int status;
- if (!wait_for_completion_timeout(&scu->cmd_complete, IPC_TIMEOUT)) {
- dev_err(&scu->dev, "IPC timed out\n");
+ if (!wait_for_completion_timeout(&scu->cmd_complete, IPC_TIMEOUT))
return -ETIMEDOUT;
- }
status = ipc_read_status(scu);
if (status & IPC_STATUS_ERR)
@@ -331,6 +328,7 @@ EXPORT_SYMBOL(intel_scu_ipc_update_register);
int intel_scu_ipc_simple_command(int cmd, int sub)
{
struct intel_scu_ipc_dev *scu;
+ u32 cmdval;
int err;
mutex_lock(&ipclock);
@@ -339,9 +337,12 @@ int intel_scu_ipc_simple_command(int cmd, int sub)
return -ENODEV;
}
scu = ipcdev;
- ipc_command(scu, sub << 12 | cmd);
+ cmdval = sub << 12 | cmd;
+ ipc_command(scu, cmdval);
err = intel_scu_ipc_check_status(scu);
mutex_unlock(&ipclock);
+ if (err)
+ dev_err(&scu->dev, "IPC command %#x failed with %d\n", cmdval, err);
return err;
}
EXPORT_SYMBOL(intel_scu_ipc_simple_command);
@@ -362,6 +363,7 @@ int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
u32 *out, int outlen)
{
struct intel_scu_ipc_dev *scu;
+ u32 cmdval;
int i, err;
mutex_lock(&ipclock);
@@ -374,7 +376,8 @@ int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
for (i = 0; i < inlen; i++)
ipc_data_writel(scu, *in++, 4 * i);
- ipc_command(scu, (inlen << 16) | (sub << 12) | cmd);
+ cmdval = (inlen << 16) | (sub << 12) | cmd;
+ ipc_command(scu, cmdval);
err = intel_scu_ipc_check_status(scu);
if (!err) {
@@ -383,6 +386,8 @@ int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
}
mutex_unlock(&ipclock);
+ if (err)
+ dev_err(&scu->dev, "IPC command %#x failed with %d\n", cmdval, err);
return err;
}
EXPORT_SYMBOL(intel_scu_ipc_command);
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 03/19] platform/x86: intel_scu_ipc: Move legacy SCU IPC API to a separate header
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 01/19] platform/x86: intel_scu_ipc: Split out SCU IPC functionality from the SCU driver Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 02/19] platform/x86: intel_scu_ipc: Log more information if SCU IPC command fails Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 04/19] platform/x86: intel_scu_ipc: Introduce new SCU IPC API Mika Westerberg
` (16 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
In preparation for introducing a new API for SCU IPC, move the legacy
API and constants to a separate header that is is subject to be removed
eventually.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
arch/x86/include/asm/intel_scu_ipc.h | 56 +------------------
arch/x86/include/asm/intel_scu_ipc_legacy.h | 62 +++++++++++++++++++++
2 files changed, 63 insertions(+), 55 deletions(-)
create mode 100644 arch/x86/include/asm/intel_scu_ipc_legacy.h
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
index c53d18f9440b..2d0e485842fd 100644
--- a/arch/x86/include/asm/intel_scu_ipc.h
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -3,22 +3,6 @@
#define _ASM_X86_INTEL_SCU_IPC_H_
#include <linux/ioport.h>
-#include <linux/notifier.h>
-
-#define IPCMSG_INDIRECT_READ 0x02
-#define IPCMSG_INDIRECT_WRITE 0x05
-
-#define IPCMSG_COLD_OFF 0x80 /* Only for Tangier */
-
-#define IPCMSG_WARM_RESET 0xF0
-#define IPCMSG_COLD_RESET 0xF1
-#define IPCMSG_SOFT_RESET 0xF2
-#define IPCMSG_COLD_BOOT 0xF3
-
-#define IPCMSG_VRTC 0xFA /* Set vRTC device */
- /* Command id associated with message IPCMSG_VRTC */
- #define IPC_CMD_VRTC_SETTIME 1 /* Set time */
- #define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */
struct device;
struct intel_scu_ipc_dev;
@@ -37,44 +21,6 @@ struct intel_scu_ipc_dev *
intel_scu_ipc_register(struct device *parent,
const struct intel_scu_ipc_data *scu_data);
-/* Read single register */
-int intel_scu_ipc_ioread8(u16 addr, u8 *data);
-
-/* Read a vector */
-int intel_scu_ipc_readv(u16 *addr, u8 *data, int len);
-
-/* Write single register */
-int intel_scu_ipc_iowrite8(u16 addr, u8 data);
-
-/* Write a vector */
-int intel_scu_ipc_writev(u16 *addr, u8 *data, int len);
-
-/* Update single register based on the mask */
-int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask);
-
-/* Issue commands to the SCU with or without data */
-int intel_scu_ipc_simple_command(int cmd, int sub);
-int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
- u32 *out, int outlen);
-
-extern struct blocking_notifier_head intel_scu_notifier;
-
-static inline void intel_scu_notifier_add(struct notifier_block *nb)
-{
- blocking_notifier_chain_register(&intel_scu_notifier, nb);
-}
-
-static inline void intel_scu_notifier_remove(struct notifier_block *nb)
-{
- blocking_notifier_chain_unregister(&intel_scu_notifier, nb);
-}
-
-static inline int intel_scu_notifier_post(unsigned long v, void *p)
-{
- return blocking_notifier_call_chain(&intel_scu_notifier, v, p);
-}
-
-#define SCU_AVAILABLE 1
-#define SCU_DOWN 2
+#include <asm/intel_scu_ipc_legacy.h>
#endif
diff --git a/arch/x86/include/asm/intel_scu_ipc_legacy.h b/arch/x86/include/asm/intel_scu_ipc_legacy.h
new file mode 100644
index 000000000000..d3a02bc07edd
--- /dev/null
+++ b/arch/x86/include/asm/intel_scu_ipc_legacy.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_INTEL_SCU_IPC_LEGACY_H_
+#define _ASM_X86_INTEL_SCU_IPC_LEGACY_H_
+
+#include <linux/notifier.h>
+
+#define IPCMSG_INDIRECT_READ 0x02
+#define IPCMSG_INDIRECT_WRITE 0x05
+
+#define IPCMSG_COLD_OFF 0x80 /* Only for Tangier */
+
+#define IPCMSG_WARM_RESET 0xF0
+#define IPCMSG_COLD_RESET 0xF1
+#define IPCMSG_SOFT_RESET 0xF2
+#define IPCMSG_COLD_BOOT 0xF3
+
+#define IPCMSG_VRTC 0xFA /* Set vRTC device */
+/* Command id associated with message IPCMSG_VRTC */
+#define IPC_CMD_VRTC_SETTIME 1 /* Set time */
+#define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */
+
+/* Read single register */
+int intel_scu_ipc_ioread8(u16 addr, u8 *data);
+
+/* Read a vector */
+int intel_scu_ipc_readv(u16 *addr, u8 *data, int len);
+
+/* Write single register */
+int intel_scu_ipc_iowrite8(u16 addr, u8 data);
+
+/* Write a vector */
+int intel_scu_ipc_writev(u16 *addr, u8 *data, int len);
+
+/* Update single register based on the mask */
+int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask);
+
+/* Issue commands to the SCU with or without data */
+int intel_scu_ipc_simple_command(int cmd, int sub);
+int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
+ u32 *out, int outlen);
+
+extern struct blocking_notifier_head intel_scu_notifier;
+
+static inline void intel_scu_notifier_add(struct notifier_block *nb)
+{
+ blocking_notifier_chain_register(&intel_scu_notifier, nb);
+}
+
+static inline void intel_scu_notifier_remove(struct notifier_block *nb)
+{
+ blocking_notifier_chain_unregister(&intel_scu_notifier, nb);
+}
+
+static inline int intel_scu_notifier_post(unsigned long v, void *p)
+{
+ return blocking_notifier_call_chain(&intel_scu_notifier, v, p);
+}
+
+#define SCU_AVAILABLE 1
+#define SCU_DOWN 2
+
+#endif
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 04/19] platform/x86: intel_scu_ipc: Introduce new SCU IPC API
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (2 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 03/19] platform/x86: intel_scu_ipc: Move legacy SCU IPC API to a separate header Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 05/19] platform/x86: intel_mid_powerbtn: Convert to use " Mika Westerberg
` (15 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
The current SCU IPC API has been operating on a single instance and
there has been no way to pin the providing module in place when the SCU
IPC is in use.
This implements a new API that takes the SCU IPC instance as first
parameter (NULL means the single instance is being used). The SCU IPC
instance can be retrieved by calling new function intel_scu_ipc_dev_get()
that take care of pinning the providing module in place as long as
intel_scu_ipc_dev_put() is not called.
The old API is updated to call the new API and is is left there in the
legacy API header to support the existing users that cannot be converted
easily.
Subsequent patches will convert most of the users over to the new API.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
arch/x86/include/asm/intel_scu_ipc.h | 38 +++-
arch/x86/include/asm/intel_scu_ipc_legacy.h | 45 +++-
drivers/platform/x86/intel_scu_ipc.c | 230 +++++++++++++++-----
3 files changed, 252 insertions(+), 61 deletions(-)
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
index 2d0e485842fd..d5f6ae514172 100644
--- a/arch/x86/include/asm/intel_scu_ipc.h
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -18,8 +18,42 @@ struct intel_scu_ipc_data {
};
struct intel_scu_ipc_dev *
-intel_scu_ipc_register(struct device *parent,
- const struct intel_scu_ipc_data *scu_data);
+__intel_scu_ipc_register(struct device *parent,
+ const struct intel_scu_ipc_data *scu_data,
+ struct module *owner);
+
+#define intel_scu_ipc_register(parent, scu_data) \
+ __intel_scu_ipc_register(parent, scu_data, THIS_MODULE)
+
+struct intel_scu_ipc_dev *intel_scu_ipc_dev_get(void);
+void intel_scu_ipc_dev_put(struct intel_scu_ipc_dev *scu);
+struct intel_scu_ipc_dev *devm_intel_scu_ipc_dev_get(struct device *dev);
+
+int intel_scu_ipc_dev_ioread8(struct intel_scu_ipc_dev *scu, u16 addr,
+ u8 *data);
+int intel_scu_ipc_dev_iowrite8(struct intel_scu_ipc_dev *scu, u16 addr,
+ u8 data);
+int intel_scu_ipc_dev_readv(struct intel_scu_ipc_dev *scu, u16 *addr,
+ u8 *data, size_t len);
+int intel_scu_ipc_dev_writev(struct intel_scu_ipc_dev *scu, u16 *addr,
+ u8 *data, size_t len);
+
+int intel_scu_ipc_dev_update(struct intel_scu_ipc_dev *scu, u16 addr,
+ u8 data, u8 mask);
+
+int intel_scu_ipc_dev_simple_command(struct intel_scu_ipc_dev *scu, int cmd,
+ int sub);
+int intel_scu_ipc_dev_command_with_size(struct intel_scu_ipc_dev *scu, int cmd,
+ int sub, const void *in, size_t inlen,
+ size_t size, void *out, size_t outlen);
+
+static inline int intel_scu_ipc_dev_command(struct intel_scu_ipc_dev *scu, int cmd,
+ int sub, const void *in, size_t inlen,
+ void *out, size_t outlen)
+{
+ return intel_scu_ipc_dev_command_with_size(scu, cmd, sub, in, inlen,
+ inlen, out, outlen);
+}
#include <asm/intel_scu_ipc_legacy.h>
diff --git a/arch/x86/include/asm/intel_scu_ipc_legacy.h b/arch/x86/include/asm/intel_scu_ipc_legacy.h
index d3a02bc07edd..4cf13fecb673 100644
--- a/arch/x86/include/asm/intel_scu_ipc_legacy.h
+++ b/arch/x86/include/asm/intel_scu_ipc_legacy.h
@@ -19,25 +19,54 @@
#define IPC_CMD_VRTC_SETTIME 1 /* Set time */
#define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */
+/* Don't call these in new code - they will be removed eventually */
+
/* Read single register */
-int intel_scu_ipc_ioread8(u16 addr, u8 *data);
+static inline int intel_scu_ipc_ioread8(u16 addr, u8 *data)
+{
+ return intel_scu_ipc_dev_ioread8(NULL, addr, data);
+}
/* Read a vector */
-int intel_scu_ipc_readv(u16 *addr, u8 *data, int len);
+static inline int intel_scu_ipc_readv(u16 *addr, u8 *data, int len)
+{
+ return intel_scu_ipc_dev_readv(NULL, addr, data, len);
+}
/* Write single register */
-int intel_scu_ipc_iowrite8(u16 addr, u8 data);
+static inline int intel_scu_ipc_iowrite8(u16 addr, u8 data)
+{
+ return intel_scu_ipc_dev_iowrite8(NULL, addr, data);
+}
/* Write a vector */
-int intel_scu_ipc_writev(u16 *addr, u8 *data, int len);
+static inline int intel_scu_ipc_writev(u16 *addr, u8 *data, int len)
+{
+ return intel_scu_ipc_dev_writev(NULL, addr, data, len);
+}
/* Update single register based on the mask */
-int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask);
+static inline int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask)
+{
+ return intel_scu_ipc_dev_update(NULL, addr, data, mask);
+}
/* Issue commands to the SCU with or without data */
-int intel_scu_ipc_simple_command(int cmd, int sub);
-int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
- u32 *out, int outlen);
+static inline int intel_scu_ipc_simple_command(int cmd, int sub)
+{
+ return intel_scu_ipc_dev_simple_command(NULL, cmd, sub);
+}
+
+static inline int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
+ u32 *out, int outlen)
+{
+ /* New API takes both inlen and outlen as bytes so convert here */
+ size_t inbytes = inlen * sizeof(u32);
+ size_t outbytes = outlen * sizeof(u32);
+
+ return intel_scu_ipc_dev_command_with_size(NULL, cmd, sub, in, inbytes,
+ inlen, out, outbytes);
+}
extern struct blocking_notifier_head intel_scu_notifier;
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index e8ea250aeda3..608034ea7af5 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -56,6 +56,7 @@
struct intel_scu_ipc_dev {
struct device dev;
struct resource mem;
+ struct module *owner;
int irq;
void __iomem *ipc_base;
struct completion cmd_complete;
@@ -84,6 +85,102 @@ static struct class intel_scu_ipc_class = {
.owner = THIS_MODULE,
};
+/**
+ * intel_scu_ipc_dev_get() - Get SCU IPC instance
+ *
+ * The recommended new API takes SCU IPC instance as parameter and this
+ * function can be called by driver to get the instance. This also makes
+ * sure the driver providing the IPC functionality cannot be unloaded
+ * while the caller has the instance.
+ *
+ * Call intel_scu_ipc_dev_put() to release the instance.
+ *
+ * Returns %NULL if SCU IPC is not currently available.
+ */
+struct intel_scu_ipc_dev *intel_scu_ipc_dev_get(void)
+{
+ struct intel_scu_ipc_dev *scu = NULL;
+
+ mutex_lock(&ipclock);
+ if (ipcdev) {
+ get_device(&ipcdev->dev);
+ /*
+ * Prevent the IPC provider from being unloaded while it
+ * is being used.
+ */
+ if (!try_module_get(ipcdev->owner))
+ put_device(&ipcdev->dev);
+ else
+ scu = ipcdev;
+ }
+
+ mutex_unlock(&ipclock);
+ return scu;
+}
+EXPORT_SYMBOL_GPL(intel_scu_ipc_dev_get);
+
+/**
+ * intel_scu_ipc_dev_put() - Put SCU IPC instance
+ * @scu: SCU IPC instance
+ *
+ * This function releases the SCU IPC instance retrieved from
+ * intel_scu_ipc_dev_get() and allows the driver providing IPC to be
+ * unloaded.
+ */
+void intel_scu_ipc_dev_put(struct intel_scu_ipc_dev *scu)
+{
+ if (scu) {
+ module_put(scu->owner);
+ put_device(&scu->dev);
+ }
+}
+EXPORT_SYMBOL_GPL(intel_scu_ipc_dev_put);
+
+struct intel_scu_ipc_devres {
+ struct intel_scu_ipc_dev *scu;
+};
+
+static void devm_intel_scu_ipc_dev_release(struct device *dev, void *res)
+{
+ struct intel_scu_ipc_devres *dr = res;
+ struct intel_scu_ipc_dev *scu = dr->scu;
+
+ intel_scu_ipc_dev_put(scu);
+}
+
+/**
+ * devm_intel_scu_ipc_dev_get() - Allocate managed SCU IPC device
+ * @dev: Device requesting the SCU IPC device
+ *
+ * The recommended new API takes SCU IPC instance as parameter and this
+ * function can be called by driver to get the instance. This also makes
+ * sure the driver providing the IPC functionality cannot be unloaded
+ * while the caller has the instance.
+ *
+ * Returns %NULL if SCU IPC is not currently available.
+ */
+struct intel_scu_ipc_dev *devm_intel_scu_ipc_dev_get(struct device *dev)
+{
+ struct intel_scu_ipc_devres *dr;
+ struct intel_scu_ipc_dev *scu;
+
+ dr = devres_alloc(devm_intel_scu_ipc_dev_release, sizeof(*dr), GFP_KERNEL);
+ if (!dr)
+ return NULL;
+
+ scu = intel_scu_ipc_dev_get();
+ if (!scu) {
+ devres_free(dr);
+ return NULL;
+ }
+
+ dr->scu = scu;
+ devres_add(dev, dr);
+
+ return scu;
+}
+EXPORT_SYMBOL_GPL(devm_intel_scu_ipc_dev_get);
+
/*
* Send ipc command
* Command Register (Write Only):
@@ -171,9 +268,9 @@ static int intel_scu_ipc_check_status(struct intel_scu_ipc_dev *scu)
}
/* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
-static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
+static int pwr_reg_rdwr(struct intel_scu_ipc_dev *scu, u16 *addr, u8 *data,
+ u32 count, u32 op, u32 id)
{
- struct intel_scu_ipc_dev *scu;
int nc;
u32 offset = 0;
int err;
@@ -183,11 +280,12 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
memset(cbuf, 0, sizeof(cbuf));
mutex_lock(&ipclock);
- if (!ipcdev) {
+ if (!scu)
+ scu = ipcdev;
+ if (!scu) {
mutex_unlock(&ipclock);
return -ENODEV;
}
- scu = ipcdev;
for (nc = 0; nc < count; nc++, offset += 2) {
cbuf[offset] = addr[nc];
@@ -223,7 +321,8 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
}
/**
- * intel_scu_ipc_ioread8 - read a word via the SCU
+ * intel_scu_ipc_dev_ioread8() - Read a byte via the SCU
+ * @scu: Optional SCU IPC instance
* @addr: Register on SCU
* @data: Return pointer for read byte
*
@@ -232,14 +331,15 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
*
* This function may sleep.
*/
-int intel_scu_ipc_ioread8(u16 addr, u8 *data)
+int intel_scu_ipc_dev_ioread8(struct intel_scu_ipc_dev *scu, u16 addr, u8 *data)
{
- return pwr_reg_rdwr(&addr, data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
+ return pwr_reg_rdwr(scu, &addr, data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
}
-EXPORT_SYMBOL(intel_scu_ipc_ioread8);
+EXPORT_SYMBOL(intel_scu_ipc_dev_ioread8);
/**
- * intel_scu_ipc_iowrite8 - write a byte via the SCU
+ * intel_scu_ipc_dev_iowrite8() - Write a byte via the SCU
+ * @scu: Optional SCU IPC instance
* @addr: Register on SCU
* @data: Byte to write
*
@@ -248,14 +348,15 @@ EXPORT_SYMBOL(intel_scu_ipc_ioread8);
*
* This function may sleep.
*/
-int intel_scu_ipc_iowrite8(u16 addr, u8 data)
+int intel_scu_ipc_dev_iowrite8(struct intel_scu_ipc_dev *scu, u16 addr, u8 data)
{
- return pwr_reg_rdwr(&addr, &data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
+ return pwr_reg_rdwr(scu, &addr, &data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
}
-EXPORT_SYMBOL(intel_scu_ipc_iowrite8);
+EXPORT_SYMBOL(intel_scu_ipc_dev_iowrite8);
/**
- * intel_scu_ipc_readvv - read a set of registers
+ * intel_scu_ipc_dev_readv() - Read a set of registers
+ * @scu: Optional SCU IPC instance
* @addr: Register list
* @data: Bytes to return
* @len: Length of array
@@ -267,14 +368,16 @@ EXPORT_SYMBOL(intel_scu_ipc_iowrite8);
*
* This function may sleep.
*/
-int intel_scu_ipc_readv(u16 *addr, u8 *data, int len)
+int intel_scu_ipc_dev_readv(struct intel_scu_ipc_dev *scu, u16 *addr, u8 *data,
+ size_t len)
{
- return pwr_reg_rdwr(addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
+ return pwr_reg_rdwr(scu, addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
}
-EXPORT_SYMBOL(intel_scu_ipc_readv);
+EXPORT_SYMBOL(intel_scu_ipc_dev_readv);
/**
- * intel_scu_ipc_writev - write a set of registers
+ * intel_scu_ipc_dev_writev() - Write a set of registers
+ * @scu: Optional SCU IPC instance
* @addr: Register list
* @data: Bytes to write
* @len: Length of array
@@ -286,16 +389,18 @@ EXPORT_SYMBOL(intel_scu_ipc_readv);
*
* This function may sleep.
*/
-int intel_scu_ipc_writev(u16 *addr, u8 *data, int len)
+int intel_scu_ipc_dev_writev(struct intel_scu_ipc_dev *scu, u16 *addr, u8 *data,
+ size_t len)
{
- return pwr_reg_rdwr(addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
+ return pwr_reg_rdwr(scu, addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
}
-EXPORT_SYMBOL(intel_scu_ipc_writev);
+EXPORT_SYMBOL(intel_scu_ipc_dev_writev);
/**
- * intel_scu_ipc_update_register - r/m/w a register
+ * intel_scu_ipc_dev_update() - Update a register
+ * @scu: Optional SCU IPC instance
* @addr: Register address
- * @bits: Bits to update
+ * @data: Bits to update
* @mask: Mask of bits to update
*
* Read-modify-write power control unit register. The first data argument
@@ -306,15 +411,17 @@ EXPORT_SYMBOL(intel_scu_ipc_writev);
* This function may sleep. Locking between SCU accesses is handled
* for the caller.
*/
-int intel_scu_ipc_update_register(u16 addr, u8 bits, u8 mask)
+int intel_scu_ipc_dev_update(struct intel_scu_ipc_dev *scu, u16 addr, u8 data,
+ u8 mask)
{
- u8 data[2] = { bits, mask };
- return pwr_reg_rdwr(&addr, data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_M);
+ u8 tmp[2] = { data, mask };
+ return pwr_reg_rdwr(scu, &addr, tmp, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_M);
}
-EXPORT_SYMBOL(intel_scu_ipc_update_register);
+EXPORT_SYMBOL(intel_scu_ipc_dev_update);
/**
- * intel_scu_ipc_simple_command - send a simple command
+ * intel_scu_ipc_dev_simple_command() - Send a simple command
+ * @scu: Optional SCU IPC instance
* @cmd: Command
* @sub: Sub type
*
@@ -325,14 +432,16 @@ EXPORT_SYMBOL(intel_scu_ipc_update_register);
* This function may sleep. Locking for SCU accesses is handled for the
* caller.
*/
-int intel_scu_ipc_simple_command(int cmd, int sub)
+int intel_scu_ipc_dev_simple_command(struct intel_scu_ipc_dev *scu, int cmd,
+ int sub)
{
- struct intel_scu_ipc_dev *scu;
u32 cmdval;
int err;
mutex_lock(&ipclock);
- if (!ipcdev) {
+ if (!scu)
+ scu = ipcdev;
+ if (!scu) {
mutex_unlock(&ipclock);
return -ENODEV;
}
@@ -345,44 +454,59 @@ int intel_scu_ipc_simple_command(int cmd, int sub)
dev_err(&scu->dev, "IPC command %#x failed with %d\n", cmdval, err);
return err;
}
-EXPORT_SYMBOL(intel_scu_ipc_simple_command);
+EXPORT_SYMBOL(intel_scu_ipc_dev_simple_command);
/**
- * intel_scu_ipc_command - command with data
+ * intel_scu_ipc_command_with_size() - Command with data
+ * @scu: Optional SCU IPC instance
* @cmd: Command
* @sub: Sub type
* @in: Input data
- * @inlen: Input length in dwords
+ * @inlen: Input length in bytes
+ * @size: Input size written to the IPC command register in whatever
+ * units (dword, byte) the particular firmware requires. Normally
+ * should be the same as @inlen.
* @out: Output data
- * @outlen: Output length in dwords
+ * @outlen: Output length in bytes
*
* Issue a command to the SCU which involves data transfers. Do the
* data copies under the lock but leave it for the caller to interpret.
*/
-int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
- u32 *out, int outlen)
+int intel_scu_ipc_dev_command_with_size(struct intel_scu_ipc_dev *scu, int cmd,
+ int sub, const void *in, size_t inlen,
+ size_t size, void *out, size_t outlen)
{
- struct intel_scu_ipc_dev *scu;
- u32 cmdval;
+ size_t outbuflen = DIV_ROUND_UP(outlen, sizeof(u32));
+ size_t inbuflen = DIV_ROUND_UP(inlen, sizeof(u32));
+ u32 cmdval, inbuf[4] = {};
int i, err;
+ if (inbuflen > 4 || outbuflen > 4)
+ return -EINVAL;
+
mutex_lock(&ipclock);
- if (!ipcdev) {
+ if (!scu)
+ scu = ipcdev;
+ if (!scu) {
mutex_unlock(&ipclock);
return -ENODEV;
}
- scu = ipcdev;
- for (i = 0; i < inlen; i++)
- ipc_data_writel(scu, *in++, 4 * i);
+ memcpy(inbuf, in, inlen);
+ for (i = 0; i < inbuflen; i++)
+ ipc_data_writel(scu, inbuf[i], 4 * i);
- cmdval = (inlen << 16) | (sub << 12) | cmd;
+ cmdval = (size << 16) | (sub << 12) | cmd;
ipc_command(scu, cmdval);
err = intel_scu_ipc_check_status(scu);
if (!err) {
- for (i = 0; i < outlen; i++)
- *out++ = ipc_data_readl(scu, 4 * i);
+ u32 outbuf[4] = {};
+
+ for (i = 0; i < outbuflen; i++)
+ outbuf[i] = ipc_data_readl(scu, 4 * i);
+
+ memcpy(out, outbuf, outlen);
}
mutex_unlock(&ipclock);
@@ -390,7 +514,7 @@ int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
dev_err(&scu->dev, "IPC command %#x failed with %d\n", cmdval, err);
return err;
}
-EXPORT_SYMBOL(intel_scu_ipc_command);
+EXPORT_SYMBOL(intel_scu_ipc_dev_command_with_size);
/*
* Interrupt handler gets called when ioc bit of IPC_COMMAND_REG set to 1
@@ -423,17 +547,20 @@ static void intel_scu_ipc_release(struct device *dev)
}
/**
- * intel_scu_ipc_register() - Register SCU IPC device
+ * __intel_scu_ipc_register() - Register SCU IPC device
* @parent: Parent device
* @scu_data: Data used to configure SCU IPC
+ * @owner: Module registering the SCU IPC device
*
* Call this function to register SCU IPC mechanism under @parent.
* Returns pointer to the new SCU IPC device or ERR_PTR() in case of
- * failure.
+ * failure. The caller may use the returned instance if it needs to do
+ * SCU IPC calls itself.
*/
struct intel_scu_ipc_dev *
-intel_scu_ipc_register(struct device *parent,
- const struct intel_scu_ipc_data *scu_data)
+__intel_scu_ipc_register(struct device *parent,
+ const struct intel_scu_ipc_data *scu_data,
+ struct module *owner)
{
int err;
struct intel_scu_ipc_dev *scu;
@@ -452,6 +579,7 @@ intel_scu_ipc_register(struct device *parent,
goto err_unlock;
}
+ scu->owner = owner;
scu->dev.parent = parent;
scu->dev.class = &intel_scu_ipc_class;
scu->dev.release = intel_scu_ipc_release;
@@ -507,7 +635,7 @@ intel_scu_ipc_register(struct device *parent,
return ERR_PTR(err);
}
-EXPORT_SYMBOL_GPL(intel_scu_ipc_register);
+EXPORT_SYMBOL_GPL(__intel_scu_ipc_register);
static int __init intel_scu_ipc_init(void)
{
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 05/19] platform/x86: intel_mid_powerbtn: Convert to use new SCU IPC API
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (3 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 04/19] platform/x86: intel_scu_ipc: Introduce new SCU IPC API Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 06/19] watchdog: intel-mid_wdt: " Mika Westerberg
` (14 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
This converts the power button driver to use the new SCU IPC API where
the SCU IPC instance is passed to the functions.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/platform/x86/intel_mid_powerbtn.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/intel_mid_powerbtn.c b/drivers/platform/x86/intel_mid_powerbtn.c
index 6f436836fe50..1fdcdef1d89f 100644
--- a/drivers/platform/x86/intel_mid_powerbtn.c
+++ b/drivers/platform/x86/intel_mid_powerbtn.c
@@ -46,6 +46,7 @@ struct mid_pb_ddata {
unsigned short mirqlvl1_addr;
unsigned short pbstat_addr;
u8 pbstat_mask;
+ struct intel_scu_ipc_dev *scu;
int (*setup)(struct mid_pb_ddata *ddata);
};
@@ -55,7 +56,8 @@ static int mid_pbstat(struct mid_pb_ddata *ddata, int *value)
int ret;
u8 pbstat;
- ret = intel_scu_ipc_ioread8(ddata->pbstat_addr, &pbstat);
+ ret = intel_scu_ipc_dev_ioread8(ddata->scu, ddata->pbstat_addr,
+ &pbstat);
if (ret)
return ret;
@@ -67,14 +69,15 @@ static int mid_pbstat(struct mid_pb_ddata *ddata, int *value)
static int mid_irq_ack(struct mid_pb_ddata *ddata)
{
- return intel_scu_ipc_update_register(ddata->mirqlvl1_addr, 0, MSIC_PWRBTNM);
+ return intel_scu_ipc_dev_update(ddata->scu, ddata->mirqlvl1_addr, 0,
+ MSIC_PWRBTNM);
}
static int mrfld_setup(struct mid_pb_ddata *ddata)
{
/* Unmask the PBIRQ and MPBIRQ on Tangier */
- intel_scu_ipc_update_register(BCOVE_PBIRQ, 0, MSIC_PWRBTNM);
- intel_scu_ipc_update_register(BCOVE_PBIRQMASK, 0, MSIC_PWRBTNM);
+ intel_scu_ipc_dev_update(ddata->scu, BCOVE_PBIRQ, 0, MSIC_PWRBTNM);
+ intel_scu_ipc_dev_update(ddata->scu, BCOVE_PBIRQMASK, 0, MSIC_PWRBTNM);
return 0;
}
@@ -161,6 +164,10 @@ static int mid_pb_probe(struct platform_device *pdev)
return error;
}
+ ddata->scu = devm_intel_scu_ipc_dev_get(&pdev->dev);
+ if (!ddata->scu)
+ return -EPROBE_DEFER;
+
error = devm_request_threaded_irq(&pdev->dev, irq, NULL, mid_pb_isr,
IRQF_ONESHOT, DRIVER_NAME, ddata);
if (error) {
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 06/19] watchdog: intel-mid_wdt: Convert to use new SCU IPC API
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (4 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 05/19] platform/x86: intel_mid_powerbtn: Convert to use " Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 07/19] platform/x86: intel_scu_ipcutil: " Mika Westerberg
` (13 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
This converts the Intel MID watchdog driver over the new SCU IPC API
where the SCU IPC instance is passed to the functions.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/watchdog/intel-mid_wdt.c | 53 ++++++++++++++++++++++----------
1 file changed, 37 insertions(+), 16 deletions(-)
diff --git a/drivers/watchdog/intel-mid_wdt.c b/drivers/watchdog/intel-mid_wdt.c
index 470213abfd3d..1ae03b64ef8b 100644
--- a/drivers/watchdog/intel-mid_wdt.c
+++ b/drivers/watchdog/intel-mid_wdt.c
@@ -33,14 +33,24 @@ enum {
SCU_WATCHDOG_KEEPALIVE,
};
-static inline int wdt_command(int sub, u32 *in, int inlen)
+struct mid_wdt {
+ struct watchdog_device wd;
+ struct device *dev;
+ struct intel_scu_ipc_dev *scu;
+};
+
+static inline int
+wdt_command(struct mid_wdt *mid, int sub, const void *in, size_t inlen, size_t size)
{
- return intel_scu_ipc_command(IPC_WATCHDOG, sub, in, inlen, NULL, 0);
+ struct intel_scu_ipc_dev *scu = mid->scu;
+
+ return intel_scu_ipc_dev_command_with_size(scu, IPC_WATCHDOG, sub, in,
+ inlen, size, NULL, 0);
}
static int wdt_start(struct watchdog_device *wd)
{
- struct device *dev = watchdog_get_drvdata(wd);
+ struct mid_wdt *mid = watchdog_get_drvdata(wd);
int ret, in_size;
int timeout = wd->timeout;
struct ipc_wd_start {
@@ -49,38 +59,41 @@ static int wdt_start(struct watchdog_device *wd)
} ipc_wd_start = { timeout - MID_WDT_PRETIMEOUT, timeout };
/*
- * SCU expects the input size for watchdog IPC to
- * be based on 4 bytes
+ * SCU expects the input size for watchdog IPC to be 2 which is the
+ * size of the structure in dwords. SCU IPC normally takes bytes
+ * but this is a special case where we specify size to be different
+ * than inlen.
*/
in_size = DIV_ROUND_UP(sizeof(ipc_wd_start), 4);
- ret = wdt_command(SCU_WATCHDOG_START, (u32 *)&ipc_wd_start, in_size);
+ ret = wdt_command(mid, SCU_WATCHDOG_START, &ipc_wd_start,
+ sizeof(ipc_wd_start), in_size);
if (ret)
- dev_crit(dev, "error starting watchdog: %d\n", ret);
+ dev_crit(mid->dev, "error starting watchdog: %d\n", ret);
return ret;
}
static int wdt_ping(struct watchdog_device *wd)
{
- struct device *dev = watchdog_get_drvdata(wd);
+ struct mid_wdt *mid = watchdog_get_drvdata(wd);
int ret;
- ret = wdt_command(SCU_WATCHDOG_KEEPALIVE, NULL, 0);
+ ret = wdt_command(mid, SCU_WATCHDOG_KEEPALIVE, NULL, 0, 0);
if (ret)
- dev_crit(dev, "Error executing keepalive: %d\n", ret);
+ dev_crit(mid->dev, "Error executing keepalive: %d\n", ret);
return ret;
}
static int wdt_stop(struct watchdog_device *wd)
{
- struct device *dev = watchdog_get_drvdata(wd);
+ struct mid_wdt *mid = watchdog_get_drvdata(wd);
int ret;
- ret = wdt_command(SCU_WATCHDOG_STOP, NULL, 0);
+ ret = wdt_command(mid, SCU_WATCHDOG_STOP, NULL, 0, 0);
if (ret)
- dev_crit(dev, "Error stopping watchdog: %d\n", ret);
+ dev_crit(mid->dev, "Error stopping watchdog: %d\n", ret);
return ret;
}
@@ -110,6 +123,7 @@ static int mid_wdt_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct watchdog_device *wdt_dev;
struct intel_mid_wdt_pdata *pdata = dev->platform_data;
+ struct mid_wdt *mid;
int ret;
if (!pdata) {
@@ -123,10 +137,13 @@ static int mid_wdt_probe(struct platform_device *pdev)
return ret;
}
- wdt_dev = devm_kzalloc(dev, sizeof(*wdt_dev), GFP_KERNEL);
- if (!wdt_dev)
+ mid = devm_kzalloc(dev, sizeof(*mid), GFP_KERNEL);
+ if (!mid)
return -ENOMEM;
+ mid->dev = dev;
+ wdt_dev = &mid->wd;
+
wdt_dev->info = &mid_wdt_info;
wdt_dev->ops = &mid_wdt_ops;
wdt_dev->min_timeout = MID_WDT_TIMEOUT_MIN;
@@ -135,7 +152,7 @@ static int mid_wdt_probe(struct platform_device *pdev)
wdt_dev->parent = dev;
watchdog_set_nowayout(wdt_dev, WATCHDOG_NOWAYOUT);
- watchdog_set_drvdata(wdt_dev, dev);
+ watchdog_set_drvdata(wdt_dev, mid);
ret = devm_request_irq(dev, pdata->irq, mid_wdt_irq,
IRQF_SHARED | IRQF_NO_SUSPEND, "watchdog",
@@ -145,6 +162,10 @@ static int mid_wdt_probe(struct platform_device *pdev)
return ret;
}
+ mid->scu = devm_intel_scu_ipc_dev_get(dev);
+ if (!mid->scu)
+ return -EPROBE_DEFER;
+
/*
* The firmware followed by U-Boot leaves the watchdog running
* with the default threshold which may vary. When we get here
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 07/19] platform/x86: intel_scu_ipcutil: Convert to use new SCU IPC API
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (5 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 06/19] watchdog: intel-mid_wdt: " Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 08/19] platform/x86: intel_scu_ipc: Add managed function to register SCU IPC Mika Westerberg
` (12 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
Convert the IPC util to use the new SCU IPC API where the SCU IPC
instance is passed to the functions.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/platform/x86/intel_scu_ipcutil.c | 43 +++++++++++++++++++++---
1 file changed, 39 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/intel_scu_ipcutil.c b/drivers/platform/x86/intel_scu_ipcutil.c
index 8afe6fa06d7b..b7c10c15a3d6 100644
--- a/drivers/platform/x86/intel_scu_ipcutil.c
+++ b/drivers/platform/x86/intel_scu_ipcutil.c
@@ -22,6 +22,9 @@
static int major;
+struct intel_scu_ipc_dev *scu;
+static DEFINE_MUTEX(scu_lock);
+
/* IOCTL commands */
#define INTE_SCU_IPC_REGISTER_READ 0
#define INTE_SCU_IPC_REGISTER_WRITE 1
@@ -52,12 +55,12 @@ static int scu_reg_access(u32 cmd, struct scu_ipc_data *data)
switch (cmd) {
case INTE_SCU_IPC_REGISTER_READ:
- return intel_scu_ipc_readv(data->addr, data->data, count);
+ return intel_scu_ipc_dev_readv(scu, data->addr, data->data, count);
case INTE_SCU_IPC_REGISTER_WRITE:
- return intel_scu_ipc_writev(data->addr, data->data, count);
+ return intel_scu_ipc_dev_writev(scu, data->addr, data->data, count);
case INTE_SCU_IPC_REGISTER_UPDATE:
- return intel_scu_ipc_update_register(data->addr[0],
- data->data[0], data->mask);
+ return intel_scu_ipc_dev_update(scu, data->addr[0], data->data[0],
+ data->mask);
default:
return -ENOTTY;
}
@@ -91,8 +94,40 @@ static long scu_ipc_ioctl(struct file *fp, unsigned int cmd,
return 0;
}
+static int scu_ipc_open(struct inode *inode, struct file *file)
+{
+ int ret = 0;
+
+ /* Only single open at the time */
+ mutex_lock(&scu_lock);
+ if (scu) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
+ scu = intel_scu_ipc_dev_get();
+ if (!scu)
+ ret = -ENODEV;
+
+unlock:
+ mutex_unlock(&scu_lock);
+ return ret;
+}
+
+static int scu_ipc_release(struct inode *inode, struct file *file)
+{
+ mutex_lock(&scu_lock);
+ intel_scu_ipc_dev_put(scu);
+ scu = NULL;
+ mutex_unlock(&scu_lock);
+
+ return 0;
+}
+
static const struct file_operations scu_ipc_fops = {
.unlocked_ioctl = scu_ipc_ioctl,
+ .open = scu_ipc_open,
+ .release = scu_ipc_release,
};
static int __init ipc_module_init(void)
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 08/19] platform/x86: intel_scu_ipc: Add managed function to register SCU IPC
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (6 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 07/19] platform/x86: intel_scu_ipcutil: " Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 09/19] platform/x86: intel_pmc_ipc: Start using " Mika Westerberg
` (11 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
Drivers such as intel_pmc_ipc.c can be unloaded as well so in order to
support those in this driver add a new function that can be called to
unregister the SCU IPC when it is not needed anymore.
We also add a managed version of the intel_scu_ipc_register() that takes
care of calling intel_scu_ipc_unregister() automatically when the driver
is unbound.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
arch/x86/include/asm/intel_scu_ipc.h | 10 +++++
drivers/platform/x86/intel_scu_ipc.c | 62 ++++++++++++++++++++++++++++
2 files changed, 72 insertions(+)
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
index d5f6ae514172..11d457af68c5 100644
--- a/arch/x86/include/asm/intel_scu_ipc.h
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -25,6 +25,16 @@ __intel_scu_ipc_register(struct device *parent,
#define intel_scu_ipc_register(parent, scu_data) \
__intel_scu_ipc_register(parent, scu_data, THIS_MODULE)
+void intel_scu_ipc_unregister(struct intel_scu_ipc_dev *scu);
+
+struct intel_scu_ipc_dev *
+__devm_intel_scu_ipc_register(struct device *parent,
+ const struct intel_scu_ipc_data *scu_data,
+ struct module *owner);
+
+#define devm_intel_scu_ipc_register(parent, scu_data) \
+ __devm_intel_scu_ipc_register(parent, scu_data, THIS_MODULE)
+
struct intel_scu_ipc_dev *intel_scu_ipc_dev_get(void);
void intel_scu_ipc_dev_put(struct intel_scu_ipc_dev *scu);
struct intel_scu_ipc_dev *devm_intel_scu_ipc_dev_get(struct device *dev);
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 608034ea7af5..d9cf7f7602b0 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -637,6 +637,68 @@ __intel_scu_ipc_register(struct device *parent,
}
EXPORT_SYMBOL_GPL(__intel_scu_ipc_register);
+/**
+ * intel_scu_ipc_unregister() - Unregister SCU IPC
+ * @scu: SCU IPC handle
+ *
+ * This unregisters the SCU IPC device and releases the acquired
+ * resources once the refcount goes to zero.
+ */
+void intel_scu_ipc_unregister(struct intel_scu_ipc_dev *scu)
+{
+ mutex_lock(&ipclock);
+ if (!WARN_ON(!ipcdev)) {
+ ipcdev = NULL;
+ device_unregister(&scu->dev);
+ }
+ mutex_unlock(&ipclock);
+}
+EXPORT_SYMBOL_GPL(intel_scu_ipc_unregister);
+
+static void devm_intel_scu_ipc_unregister(struct device *dev, void *res)
+{
+ struct intel_scu_ipc_devres *dr = res;
+ struct intel_scu_ipc_dev *scu = dr->scu;
+
+ intel_scu_ipc_unregister(scu);
+}
+
+/**
+ * __devm_intel_scu_ipc_register() - Register managed SCU IPC device
+ * @parent: Parent device
+ * @scu_data: Data used to configure SCU IPC
+ * @owner: Module registering the SCU IPC device
+ *
+ * Call this function to register managed SCU IPC mechanism under
+ * @parent. Returns pointer to the new SCU IPC device or ERR_PTR() in
+ * case of failure. The caller may use the returned instance if it needs
+ * to do SCU IPC calls itself.
+ */
+struct intel_scu_ipc_dev *
+__devm_intel_scu_ipc_register(struct device *parent,
+ const struct intel_scu_ipc_data *scu_data,
+ struct module *owner)
+{
+ struct intel_scu_ipc_devres *dr;
+ struct intel_scu_ipc_dev *scu;
+
+ dr = devres_alloc(devm_intel_scu_ipc_unregister, sizeof(*dr), GFP_KERNEL);
+ if (!dr)
+ return NULL;
+
+ scu = __intel_scu_ipc_register(parent, scu_data, owner);
+ if (IS_ERR(scu)) {
+ devres_free(dr);
+ return scu;
+ }
+
+ dr->scu = scu;
+ devres_add(parent, dr);
+
+ return scu;
+}
+EXPORT_SYMBOL_GPL(__devm_intel_scu_ipc_register);
+
static int __init intel_scu_ipc_init(void)
{
return class_register(&intel_scu_ipc_class);
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 09/19] platform/x86: intel_pmc_ipc: Start using SCU IPC
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (7 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 08/19] platform/x86: intel_scu_ipc: Add managed function to register SCU IPC Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 10/19] mfd: intel_soc_pmic: Add SCU IPC member to struct intel_soc_pmic Mika Westerberg
` (10 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
SCU IPC is pretty much the same IPC implemented in the intel_pmc_ipc
driver so drop the duplicate implementation and call directly the SCU
IPC.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/platform/x86/Kconfig | 1 +
drivers/platform/x86/intel_pmc_ipc.c | 303 ++++-----------------------
2 files changed, 40 insertions(+), 264 deletions(-)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 964ac735245d..07bfad7d8106 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1322,6 +1322,7 @@ config INTEL_PMC_CORE
config INTEL_PMC_IPC
tristate "Intel PMC IPC Driver"
depends on ACPI && PCI
+ select INTEL_SCU_IPC
---help---
This driver provides support for PMC control on some Intel platforms.
The PMC is an ARC processor which defines IPC commands for communication
diff --git a/drivers/platform/x86/intel_pmc_ipc.c b/drivers/platform/x86/intel_pmc_ipc.c
index 2433bf73f1ed..ea85b854c4c6 100644
--- a/drivers/platform/x86/intel_pmc_ipc.c
+++ b/drivers/platform/x86/intel_pmc_ipc.c
@@ -21,28 +21,10 @@
#include <linux/platform_device.h>
#include <asm/intel_pmc_ipc.h>
+#include <asm/intel_scu_ipc.h>
#include <linux/platform_data/itco_wdt.h>
-/*
- * IPC registers
- * The IA write to IPC_CMD command register triggers an interrupt to the ARC,
- * The ARC handles the interrupt and services it, writing optional data to
- * the IPC1 registers, updates the IPC_STS response register with the status.
- */
-#define IPC_CMD 0x00
-#define IPC_CMD_MSI BIT(8)
-#define IPC_CMD_SIZE 16
-#define IPC_CMD_SUBCMD 12
-#define IPC_STATUS 0x04
-#define IPC_STATUS_IRQ BIT(2)
-#define IPC_STATUS_ERR BIT(1)
-#define IPC_STATUS_BUSY BIT(0)
-#define IPC_SPTR 0x08
-#define IPC_DPTR 0x0C
-#define IPC_WRITE_BUFFER 0x80
-#define IPC_READ_BUFFER 0x90
-
/* Residency with clock rate at 19.2MHz to usecs */
#define S0IX_RESIDENCY_IN_USECS(d, s) \
({ \
@@ -51,16 +33,6 @@
result; \
})
-/*
- * 16-byte buffer for sending data associated with IPC command.
- */
-#define IPC_DATA_BUFFER_SIZE 16
-
-#define IPC_LOOP_CNT 3000000
-#define IPC_MAX_SEC 3
-
-#define IPC_TRIGGER_MODE_IRQ true
-
/* exported resources from IFWI */
#define PLAT_RESOURCE_IPC_INDEX 0
#define PLAT_RESOURCE_IPC_SIZE 0x1000
@@ -103,11 +75,6 @@
static struct intel_pmc_ipc_dev {
struct device *dev;
- void __iomem *ipc_base;
- bool irq_mode;
- int irq;
- int cmd;
- struct completion cmd_complete;
/* The following PMC BARs share the same ACPI device with the IPC */
resource_size_t acpi_io_base;
@@ -132,53 +99,6 @@ static struct intel_pmc_ipc_dev {
struct platform_device *telemetry_dev;
} ipcdev;
-static char *ipc_err_sources[] = {
- [IPC_ERR_NONE] =
- "no error",
- [IPC_ERR_CMD_NOT_SUPPORTED] =
- "command not supported",
- [IPC_ERR_CMD_NOT_SERVICED] =
- "command not serviced",
- [IPC_ERR_UNABLE_TO_SERVICE] =
- "unable to service",
- [IPC_ERR_CMD_INVALID] =
- "command invalid",
- [IPC_ERR_CMD_FAILED] =
- "command failed",
- [IPC_ERR_EMSECURITY] =
- "Invalid Battery",
- [IPC_ERR_UNSIGNEDKERNEL] =
- "Unsigned kernel",
-};
-
-/* Prevent concurrent calls to the PMC */
-static DEFINE_MUTEX(ipclock);
-
-static inline void ipc_send_command(u32 cmd)
-{
- ipcdev.cmd = cmd;
- if (ipcdev.irq_mode) {
- reinit_completion(&ipcdev.cmd_complete);
- cmd |= IPC_CMD_MSI;
- }
- writel(cmd, ipcdev.ipc_base + IPC_CMD);
-}
-
-static inline u32 ipc_read_status(void)
-{
- return readl(ipcdev.ipc_base + IPC_STATUS);
-}
-
-static inline void ipc_data_writel(u32 data, u32 offset)
-{
- writel(data, ipcdev.ipc_base + IPC_WRITE_BUFFER + offset);
-}
-
-static inline u32 ipc_data_readl(u32 offset)
-{
- return readl(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
-}
-
static inline u64 gcr_data_readq(u32 offset)
{
return readq(ipcdev.gcr_mem_base + offset);
@@ -274,127 +194,6 @@ static int update_no_reboot_bit(void *priv, bool set)
PMC_CFG_NO_REBOOT_MASK, value);
}
-static int intel_pmc_ipc_check_status(void)
-{
- int status;
- int ret = 0;
-
- if (ipcdev.irq_mode) {
- if (0 == wait_for_completion_timeout(
- &ipcdev.cmd_complete, IPC_MAX_SEC * HZ))
- ret = -ETIMEDOUT;
- } else {
- int loop_count = IPC_LOOP_CNT;
-
- while ((ipc_read_status() & IPC_STATUS_BUSY) && --loop_count)
- udelay(1);
- if (loop_count == 0)
- ret = -ETIMEDOUT;
- }
-
- status = ipc_read_status();
- if (ret == -ETIMEDOUT) {
- dev_err(ipcdev.dev,
- "IPC timed out, TS=0x%x, CMD=0x%x\n",
- status, ipcdev.cmd);
- return ret;
- }
-
- if (status & IPC_STATUS_ERR) {
- int i;
-
- ret = -EIO;
- i = (status >> IPC_CMD_SIZE) & 0xFF;
- if (i < ARRAY_SIZE(ipc_err_sources))
- dev_err(ipcdev.dev,
- "IPC failed: %s, STS=0x%x, CMD=0x%x\n",
- ipc_err_sources[i], status, ipcdev.cmd);
- else
- dev_err(ipcdev.dev,
- "IPC failed: unknown, STS=0x%x, CMD=0x%x\n",
- status, ipcdev.cmd);
- if ((i == IPC_ERR_UNSIGNEDKERNEL) || (i == IPC_ERR_EMSECURITY))
- ret = -EACCES;
- }
-
- return ret;
-}
-
-/**
- * intel_pmc_ipc_simple_command() - Simple IPC command
- * @cmd: IPC command code.
- * @sub: IPC command sub type.
- *
- * Send a simple IPC command to PMC when don't need to specify
- * input/output data and source/dest pointers.
- *
- * Return: an IPC error code or 0 on success.
- */
-static int intel_pmc_ipc_simple_command(int cmd, int sub)
-{
- int ret;
-
- mutex_lock(&ipclock);
- if (ipcdev.dev == NULL) {
- mutex_unlock(&ipclock);
- return -ENODEV;
- }
- ipc_send_command(sub << IPC_CMD_SUBCMD | cmd);
- ret = intel_pmc_ipc_check_status();
- mutex_unlock(&ipclock);
-
- return ret;
-}
-
-/**
- * intel_pmc_ipc_raw_cmd() - IPC command with data and pointers
- * @cmd: IPC command code.
- * @sub: IPC command sub type.
- * @in: input data of this IPC command.
- * @inlen: input data length in bytes.
- * @out: output data of this IPC command.
- * @outlen: output data length in dwords.
- * @sptr: data writing to SPTR register.
- * @dptr: data writing to DPTR register.
- *
- * Send an IPC command to PMC with input/output data and source/dest pointers.
- *
- * Return: an IPC error code or 0 on success.
- */
-static int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen, u32 *out,
- u32 outlen, u32 dptr, u32 sptr)
-{
- u32 wbuf[4] = { 0 };
- int ret;
- int i;
-
- if (inlen > IPC_DATA_BUFFER_SIZE || outlen > IPC_DATA_BUFFER_SIZE / 4)
- return -EINVAL;
-
- mutex_lock(&ipclock);
- if (ipcdev.dev == NULL) {
- mutex_unlock(&ipclock);
- return -ENODEV;
- }
- memcpy(wbuf, in, inlen);
- writel(dptr, ipcdev.ipc_base + IPC_DPTR);
- writel(sptr, ipcdev.ipc_base + IPC_SPTR);
- /* The input data register is 32bit register and inlen is in Byte */
- for (i = 0; i < ((inlen + 3) / 4); i++)
- ipc_data_writel(wbuf[i], 4 * i);
- ipc_send_command((inlen << IPC_CMD_SIZE) |
- (sub << IPC_CMD_SUBCMD) | cmd);
- ret = intel_pmc_ipc_check_status();
- if (!ret) {
- /* out is read from 32bit register and outlen is in 32bit */
- for (i = 0; i < outlen; i++)
- *out++ = ipc_data_readl(4 * i);
- }
- mutex_unlock(&ipclock);
-
- return ret;
-}
-
/**
* intel_pmc_ipc_command() - IPC command with input/output data
* @cmd: IPC command code.
@@ -411,54 +210,32 @@ static int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen, u32 *out,
int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
u32 *out, u32 outlen)
{
- return intel_pmc_ipc_raw_cmd(cmd, sub, in, inlen, out, outlen, 0, 0);
+ return intel_scu_ipc_dev_command(NULL, cmd, sub, in, inlen, out, outlen);
}
EXPORT_SYMBOL_GPL(intel_pmc_ipc_command);
-static irqreturn_t ioc(int irq, void *dev_id)
-{
- int status;
-
- if (ipcdev.irq_mode) {
- status = ipc_read_status();
- writel(status | IPC_STATUS_IRQ, ipcdev.ipc_base + IPC_STATUS);
- }
- complete(&ipcdev.cmd_complete);
-
- return IRQ_HANDLED;
-}
-
static int ipc_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct intel_pmc_ipc_dev *pmc = &ipcdev;
+ struct intel_scu_ipc_pdata pdata = {};
+ struct intel_scu_ipc_dev *scu;
int ret;
/* Only one PMC is supported */
if (pmc->dev)
return -EBUSY;
- pmc->irq_mode = IPC_TRIGGER_MODE_IRQ;
-
spin_lock_init(&ipcdev.gcr_lock);
ret = pcim_enable_device(pdev);
if (ret)
return ret;
- ret = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
- if (ret)
- return ret;
-
- init_completion(&pmc->cmd_complete);
-
- pmc->ipc_base = pcim_iomap_table(pdev)[0];
+ pdata.mem = pdev->resource[0];
- ret = devm_request_irq(&pdev->dev, pdev->irq, ioc, 0, "intel_pmc_ipc",
- pmc);
- if (ret) {
- dev_err(&pdev->dev, "Failed to request irq\n");
- return ret;
- }
+ scu = devm_intel_scu_ipc_register(&pdev->dev, &pdata);
+ if (IS_ERR(scu))
+ return PTR_ERR(scu);
pmc->dev = &pdev->dev;
@@ -485,6 +262,7 @@ static ssize_t intel_pmc_ipc_simple_cmd_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
+ struct intel_scu_ipc_dev *scu = dev_get_drvdata(dev);
int subcmd;
int cmd;
int ret;
@@ -495,7 +273,7 @@ static ssize_t intel_pmc_ipc_simple_cmd_store(struct device *dev,
return -EINVAL;
}
- ret = intel_pmc_ipc_simple_command(cmd, subcmd);
+ ret = intel_scu_ipc_dev_simple_command(scu, cmd, subcmd);
if (ret) {
dev_err(dev, "command %d error with %d\n", cmd, ret);
return ret;
@@ -508,6 +286,7 @@ static ssize_t intel_pmc_ipc_northpeak_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
+ struct intel_scu_ipc_dev *scu = dev_get_drvdata(dev);
unsigned long val;
int subcmd;
int ret;
@@ -520,7 +299,7 @@ static ssize_t intel_pmc_ipc_northpeak_store(struct device *dev,
subcmd = 1;
else
subcmd = 0;
- ret = intel_pmc_ipc_simple_command(PMC_IPC_NORTHPEAK_CTRL, subcmd);
+ ret = intel_scu_ipc_dev_simple_command(scu, PMC_IPC_NORTHPEAK_CTRL, subcmd);
if (ret) {
dev_err(dev, "command north %d error with %d\n", subcmd, ret);
return ret;
@@ -714,9 +493,11 @@ static int ipc_create_pmc_devices(void)
return ret;
}
-static int ipc_plat_get_res(struct platform_device *pdev)
+static int ipc_plat_get_res(struct platform_device *pdev,
+ struct intel_scu_ipc_pdata *pdata)
{
struct resource *res, *punit_res = punit_res_array;
+ resource_size_t start;
void __iomem *addr;
int size;
@@ -785,23 +566,30 @@ static int ipc_plat_get_res(struct platform_device *pdev)
dev_info(&pdev->dev, "punit GTD interface res: %pR\n", res);
}
+ pdata->irq = platform_get_irq(pdev, 0);
+
res = platform_get_resource(pdev, IORESOURCE_MEM,
PLAT_RESOURCE_IPC_INDEX);
if (!res) {
dev_err(&pdev->dev, "Failed to get ipc resource\n");
return -ENXIO;
}
- size = PLAT_RESOURCE_IPC_SIZE + PLAT_RESOURCE_GCR_SIZE;
- res->end = res->start + size - 1;
+ dev_info(&pdev->dev, "ipc res: %pR\n", res);
- addr = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(addr))
- return PTR_ERR(addr);
+ pdata->mem.flags = res->flags;
+ pdata->mem.start = res->start;
+ pdata->mem.end = res->start + PLAT_RESOURCE_IPC_SIZE - 1;
- ipcdev.ipc_base = addr;
+ start = res->start + PLAT_RESOURCE_GCR_OFFSET;
+ if (!devm_request_mem_region(&pdev->dev, start, PLAT_RESOURCE_GCR_SIZE,
+ "pmc_ipc_plat"))
+ return -EBUSY;
- ipcdev.gcr_mem_base = addr + PLAT_RESOURCE_GCR_OFFSET;
- dev_info(&pdev->dev, "ipc res: %pR\n", res);
+ addr = devm_ioremap(&pdev->dev, start, PLAT_RESOURCE_GCR_SIZE);
+ if (!addr)
+ return -ENOMEM;
+
+ ipcdev.gcr_mem_base = addr;
ipcdev.telem_res_inval = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM,
@@ -854,51 +642,38 @@ MODULE_DEVICE_TABLE(acpi, ipc_acpi_ids);
static int ipc_plat_probe(struct platform_device *pdev)
{
+ struct intel_scu_ipc_pdata pdata = {};
+ struct intel_scu_ipc_dev *scu;
int ret;
ipcdev.dev = &pdev->dev;
- ipcdev.irq_mode = IPC_TRIGGER_MODE_IRQ;
- init_completion(&ipcdev.cmd_complete);
spin_lock_init(&ipcdev.gcr_lock);
- ipcdev.irq = platform_get_irq(pdev, 0);
- if (ipcdev.irq < 0)
- return -EINVAL;
-
- ret = ipc_plat_get_res(pdev);
+ ret = ipc_plat_get_res(pdev, &pdata);
if (ret) {
dev_err(&pdev->dev, "Failed to request resource\n");
return ret;
}
+ scu = devm_intel_scu_ipc_register(&pdev->dev, &pdata);
+ if (IS_ERR(scu))
+ return PTR_ERR(scu);
+
+ platform_set_drvdata(pdev, scu);
+
ret = ipc_create_pmc_devices();
if (ret) {
dev_err(&pdev->dev, "Failed to create pmc devices\n");
return ret;
}
- if (devm_request_irq(&pdev->dev, ipcdev.irq, ioc, IRQF_NO_SUSPEND,
- "intel_pmc_ipc", &ipcdev)) {
- dev_err(&pdev->dev, "Failed to request irq\n");
- ret = -EBUSY;
- goto err_irq;
- }
-
ipcdev.has_gcr_regs = true;
return 0;
-
-err_irq:
- platform_device_unregister(ipcdev.tco_dev);
- platform_device_unregister(ipcdev.punit_dev);
- platform_device_unregister(ipcdev.telemetry_dev);
-
- return ret;
}
static int ipc_plat_remove(struct platform_device *pdev)
{
- devm_free_irq(&pdev->dev, ipcdev.irq, &ipcdev);
platform_device_unregister(ipcdev.tco_dev);
platform_device_unregister(ipcdev.punit_dev);
platform_device_unregister(ipcdev.telemetry_dev);
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 10/19] mfd: intel_soc_pmic: Add SCU IPC member to struct intel_soc_pmic
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (8 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 09/19] platform/x86: intel_pmc_ipc: Start using " Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 11/19] mfd: intel_soc_pmic_bxtwc: Convert to use new SCU IPC API Mika Westerberg
` (9 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
Both PMIC drivers (intel_soc_pmic_mrfld and intel_soc_pmic_bxtwc) will
be using this field going forward to access the SCU IPC instance.
While there add kernel-doc for the intel_soc_pmic structure.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
include/linux/mfd/intel_soc_pmic.h | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/include/linux/mfd/intel_soc_pmic.h b/include/linux/mfd/intel_soc_pmic.h
index bfecd6bd4990..6a88e34cb955 100644
--- a/include/linux/mfd/intel_soc_pmic.h
+++ b/include/linux/mfd/intel_soc_pmic.h
@@ -13,6 +13,20 @@
#include <linux/regmap.h>
+/**
+ * struct intel_soc_pmic - Intel SoC PMIC data
+ * @irq: Master interrupt number of the parent PMIC device
+ * @regmap: Pointer to the parent PMIC device regmap structure
+ * @irq_chip_data: IRQ chip data for the PMIC itself
+ * @irq_chip_data_pwrbtn: Chained IRQ chip data for the Power Button
+ * @irq_chip_data_tmu: Chained IRQ chip data for the Time Management Unit
+ * @irq_chip_data_bcu: Chained IRQ chip data for the Burst Control Unit
+ * @irq_chip_data_adc: Chained IRQ chip data for the General Purpose ADC
+ * @irq_chip_data_chgr: Chained IRQ chip data for the External Charger
+ * @irq_chip_data_crit: Chained IRQ chip data for the Critical Event Handler
+ * @dev: Pointer to the parent PMIC device
+ * @scu: Pointer to the SCU IPC device data structure
+ */
struct intel_soc_pmic {
int irq;
struct regmap *regmap;
@@ -24,6 +38,7 @@ struct intel_soc_pmic {
struct regmap_irq_chip_data *irq_chip_data_chgr;
struct regmap_irq_chip_data *irq_chip_data_crit;
struct device *dev;
+ struct intel_scu_ipc_dev *scu;
};
int intel_soc_pmic_exec_mipi_pmic_seq_element(u16 i2c_address, u32 reg_address,
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 11/19] mfd: intel_soc_pmic_bxtwc: Convert to use new SCU IPC API
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (9 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 10/19] mfd: intel_soc_pmic: Add SCU IPC member to struct intel_soc_pmic Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 12/19] mfd: intel_soc_pmic_mrfld: " Mika Westerberg
` (8 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
Convert the Intel Broxton Whiskey Cover PMIC driver to use the new SCU
IPC API. This allows us to get rid of the PMC IPC implementation which
is now covered in SCU IPC driver. We drop the error log if the IPC
command fails because intel_scu_ipc_dev_command() does that already.
Also move PMIC specific IPC message constants to the PMIC driver from
the intel_pmc_ipc.h header.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
arch/x86/include/asm/intel_pmc_ipc.h | 3 ---
drivers/mfd/intel_soc_pmic_bxtwc.c | 34 ++++++++++++++--------------
2 files changed, 17 insertions(+), 20 deletions(-)
diff --git a/arch/x86/include/asm/intel_pmc_ipc.h b/arch/x86/include/asm/intel_pmc_ipc.h
index e6da1ce26256..b438a488f613 100644
--- a/arch/x86/include/asm/intel_pmc_ipc.h
+++ b/arch/x86/include/asm/intel_pmc_ipc.h
@@ -3,9 +3,6 @@
#define _ASM_X86_INTEL_PMC_IPC_H_
/* Commands */
-#define PMC_IPC_PMIC_ACCESS 0xFF
-#define PMC_IPC_PMIC_ACCESS_READ 0x0
-#define PMC_IPC_PMIC_ACCESS_WRITE 0x1
#define PMC_IPC_USB_PWR_CTRL 0xF0
#define PMC_IPC_PMIC_BLACKLIST_SEL 0xEF
#define PMC_IPC_PHY_CONFIG 0xEE
diff --git a/drivers/mfd/intel_soc_pmic_bxtwc.c b/drivers/mfd/intel_soc_pmic_bxtwc.c
index 739cfb5b69fe..eba89780dbe7 100644
--- a/drivers/mfd/intel_soc_pmic_bxtwc.c
+++ b/drivers/mfd/intel_soc_pmic_bxtwc.c
@@ -15,7 +15,7 @@
#include <linux/mfd/intel_soc_pmic_bxtwc.h>
#include <linux/module.h>
-#include <asm/intel_pmc_ipc.h>
+#include <asm/intel_scu_ipc.h>
/* PMIC device registers */
#define REG_ADDR_MASK 0xFF00
@@ -58,6 +58,10 @@
/* Whiskey Cove PMIC share same ACPI ID between different platforms */
#define BROXTON_PMIC_WC_HRV 4
+#define PMC_PMIC_ACCESS 0xFF
+#define PMC_PMIC_READ 0x0
+#define PMC_PMIC_WRITE 0x1
+
enum bxtwc_irqs {
BXTWC_PWRBTN_LVL1_IRQ = 0,
BXTWC_TMU_LVL1_IRQ,
@@ -288,13 +292,12 @@ static int regmap_ipc_byte_reg_read(void *context, unsigned int reg,
ipc_in[0] = reg;
ipc_in[1] = i2c_addr;
- ret = intel_pmc_ipc_command(PMC_IPC_PMIC_ACCESS,
- PMC_IPC_PMIC_ACCESS_READ,
- ipc_in, sizeof(ipc_in), (u32 *)ipc_out, 1);
- if (ret) {
- dev_err(pmic->dev, "Failed to read from PMIC\n");
+ ret = intel_scu_ipc_dev_command(pmic->scu, PMC_PMIC_ACCESS,
+ PMC_PMIC_READ, ipc_in, sizeof(ipc_in),
+ ipc_out, sizeof(ipc_out));
+ if (ret)
return ret;
- }
+
*val = ipc_out[0];
return 0;
@@ -303,7 +306,6 @@ static int regmap_ipc_byte_reg_read(void *context, unsigned int reg,
static int regmap_ipc_byte_reg_write(void *context, unsigned int reg,
unsigned int val)
{
- int ret;
int i2c_addr;
u8 ipc_in[3];
struct intel_soc_pmic *pmic = context;
@@ -321,15 +323,9 @@ static int regmap_ipc_byte_reg_write(void *context, unsigned int reg,
ipc_in[0] = reg;
ipc_in[1] = i2c_addr;
ipc_in[2] = val;
- ret = intel_pmc_ipc_command(PMC_IPC_PMIC_ACCESS,
- PMC_IPC_PMIC_ACCESS_WRITE,
- ipc_in, sizeof(ipc_in), NULL, 0);
- if (ret) {
- dev_err(pmic->dev, "Failed to write to PMIC\n");
- return ret;
- }
-
- return 0;
+ return intel_scu_ipc_dev_command(pmic->scu, PMC_PMIC_ACCESS,
+ PMC_PMIC_WRITE, ipc_in, sizeof(ipc_in),
+ NULL, 0);
}
/* sysfs interfaces to r/w PMIC registers, required by initial script */
@@ -457,6 +453,10 @@ static int bxtwc_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, pmic);
pmic->dev = &pdev->dev;
+ pmic->scu = devm_intel_scu_ipc_dev_get(&pdev->dev);
+ if (!pmic->scu)
+ return -EPROBE_DEFER;
+
pmic->regmap = devm_regmap_init(&pdev->dev, NULL, pmic,
&bxtwc_regmap_config);
if (IS_ERR(pmic->regmap)) {
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 12/19] mfd: intel_soc_pmic_mrfld: Convert to use new SCU IPC API
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (10 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 11/19] mfd: intel_soc_pmic_bxtwc: Convert to use new SCU IPC API Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 13/19] platform/x86: intel_telemetry: " Mika Westerberg
` (7 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
This converts the Intel Merrifield PMIC driver over the new SCU IPC API
where the SCU IPC instance is passed to the functions.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mfd/intel_soc_pmic_mrfld.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/intel_soc_pmic_mrfld.c b/drivers/mfd/intel_soc_pmic_mrfld.c
index 26a1551c5faf..bd94c989d232 100644
--- a/drivers/mfd/intel_soc_pmic_mrfld.c
+++ b/drivers/mfd/intel_soc_pmic_mrfld.c
@@ -74,10 +74,11 @@ static const struct mfd_cell bcove_dev[] = {
static int bcove_ipc_byte_reg_read(void *context, unsigned int reg,
unsigned int *val)
{
+ struct intel_soc_pmic *pmic = context;
u8 ipc_out;
int ret;
- ret = intel_scu_ipc_ioread8(reg, &ipc_out);
+ ret = intel_scu_ipc_dev_ioread8(pmic->scu, reg, &ipc_out);
if (ret)
return ret;
@@ -88,10 +89,11 @@ static int bcove_ipc_byte_reg_read(void *context, unsigned int reg,
static int bcove_ipc_byte_reg_write(void *context, unsigned int reg,
unsigned int val)
{
+ struct intel_soc_pmic *pmic = context;
u8 ipc_in = val;
int ret;
- ret = intel_scu_ipc_iowrite8(reg, ipc_in);
+ ret = intel_scu_ipc_dev_iowrite8(pmic->scu, reg, ipc_in);
if (ret)
return ret;
@@ -117,6 +119,10 @@ static int bcove_probe(struct platform_device *pdev)
if (!pmic)
return -ENOMEM;
+ pmic->scu = devm_intel_scu_ipc_dev_get(dev);
+ if (!pmic->scu)
+ return -ENOMEM;
+
platform_set_drvdata(pdev, pmic);
pmic->dev = &pdev->dev;
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 13/19] platform/x86: intel_telemetry: Convert to use new SCU IPC API
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (11 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 12/19] mfd: intel_soc_pmic_mrfld: " Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 14/19] platform/x86: intel_pmc_ipc: Drop intel_pmc_ipc_command() Mika Westerberg
` (6 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
Convert the Intel Apollo Lake telemetry driver to use the new SCU IPC
API. This allows us to get rid of the duplicate PMC IPC implementation
which is now covered in SCU IPC driver.
Also move telemetry specific IPC message constant to the telemetry
driver where it belongs.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
arch/x86/include/asm/intel_pmc_ipc.h | 1 -
arch/x86/include/asm/intel_telemetry.h | 3 +
drivers/platform/x86/intel_telemetry_pltdrv.c | 95 +++++++++----------
3 files changed, 49 insertions(+), 50 deletions(-)
diff --git a/arch/x86/include/asm/intel_pmc_ipc.h b/arch/x86/include/asm/intel_pmc_ipc.h
index b438a488f613..ddc964b9c78c 100644
--- a/arch/x86/include/asm/intel_pmc_ipc.h
+++ b/arch/x86/include/asm/intel_pmc_ipc.h
@@ -8,7 +8,6 @@
#define PMC_IPC_PHY_CONFIG 0xEE
#define PMC_IPC_NORTHPEAK_CTRL 0xED
#define PMC_IPC_PM_DEBUG 0xEC
-#define PMC_IPC_PMC_TELEMTRY 0xEB
#define PMC_IPC_PMC_FW_MSG_CTRL 0xEA
/* IPC return code */
diff --git a/arch/x86/include/asm/intel_telemetry.h b/arch/x86/include/asm/intel_telemetry.h
index 2f77e31a1283..274aaf0dae48 100644
--- a/arch/x86/include/asm/intel_telemetry.h
+++ b/arch/x86/include/asm/intel_telemetry.h
@@ -10,6 +10,8 @@
#define TELEM_MAX_EVENTS_SRAM 28
#define TELEM_MAX_OS_ALLOCATED_EVENTS 20
+#include <asm/intel_scu_ipc.h>
+
enum telemetry_unit {
TELEM_PSS = 0,
TELEM_IOSS,
@@ -51,6 +53,7 @@ struct telemetry_plt_config {
struct telemetry_unit_config ioss_config;
struct mutex telem_trace_lock;
struct mutex telem_lock;
+ struct intel_scu_ipc_dev *scu;
bool telem_in_use;
};
diff --git a/drivers/platform/x86/intel_telemetry_pltdrv.c b/drivers/platform/x86/intel_telemetry_pltdrv.c
index c4c742bb23cf..efcf214d25b1 100644
--- a/drivers/platform/x86/intel_telemetry_pltdrv.c
+++ b/drivers/platform/x86/intel_telemetry_pltdrv.c
@@ -15,7 +15,6 @@
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
-#include <asm/intel_pmc_ipc.h>
#include <asm/intel_punit_ipc.h>
#include <asm/intel_telemetry.h>
@@ -35,6 +34,7 @@
#define TELEM_SSRAM_STARTTIME_OFFSET 8
#define TELEM_SSRAM_EVTLOG_OFFSET 16
+#define IOSS_TELEM 0xeb
#define IOSS_TELEM_EVENT_READ 0x0
#define IOSS_TELEM_EVENT_WRITE 0x1
#define IOSS_TELEM_INFO_READ 0x2
@@ -42,9 +42,6 @@
#define IOSS_TELEM_TRACE_CTL_WRITE 0x6
#define IOSS_TELEM_EVENT_CTL_READ 0x7
#define IOSS_TELEM_EVENT_CTL_WRITE 0x8
-#define IOSS_TELEM_EVT_CTRL_WRITE_SIZE 0x4
-#define IOSS_TELEM_READ_WORD 0x1
-#define IOSS_TELEM_WRITE_FOURBYTES 0x4
#define IOSS_TELEM_EVT_WRITE_SIZE 0x3
#define TELEM_INFO_SRAMEVTS_MASK 0xFF00
@@ -253,17 +250,14 @@ static int telemetry_check_evtid(enum telemetry_unit telem_unit,
static inline int telemetry_plt_config_ioss_event(u32 evt_id, int index)
{
u32 write_buf;
- int ret;
write_buf = evt_id | TELEM_EVENT_ENABLE;
write_buf <<= BITS_PER_BYTE;
write_buf |= index;
- ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
- IOSS_TELEM_EVENT_WRITE, (u8 *)&write_buf,
- IOSS_TELEM_EVT_WRITE_SIZE, NULL, 0);
-
- return ret;
+ return intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM,
+ IOSS_TELEM_EVENT_WRITE, &write_buf,
+ IOSS_TELEM_EVT_WRITE_SIZE, NULL, 0);
}
static inline int telemetry_plt_config_pss_event(u32 evt_id, int index)
@@ -281,6 +275,7 @@ static inline int telemetry_plt_config_pss_event(u32 evt_id, int index)
static int telemetry_setup_iossevtconfig(struct telemetry_evtconfig evtconfig,
enum telemetry_action action)
{
+ struct intel_scu_ipc_dev *scu = telm_conf->scu;
u8 num_ioss_evts, ioss_period;
int ret, index, idx;
u32 *ioss_evtmap;
@@ -291,9 +286,9 @@ static int telemetry_setup_iossevtconfig(struct telemetry_evtconfig evtconfig,
ioss_evtmap = evtconfig.evtmap;
/* Get telemetry EVENT CTL */
- ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
+ ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
IOSS_TELEM_EVENT_CTL_READ, NULL, 0,
- &telem_ctrl, IOSS_TELEM_READ_WORD);
+ &telem_ctrl, sizeof(telem_ctrl));
if (ret) {
pr_err("IOSS TELEM_CTRL Read Failed\n");
return ret;
@@ -302,11 +297,9 @@ static int telemetry_setup_iossevtconfig(struct telemetry_evtconfig evtconfig,
/* Disable Telemetry */
TELEM_DISABLE(telem_ctrl);
- ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
- IOSS_TELEM_EVENT_CTL_WRITE,
- (u8 *)&telem_ctrl,
- IOSS_TELEM_EVT_CTRL_WRITE_SIZE,
- NULL, 0);
+ ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
+ IOSS_TELEM_EVENT_CTL_WRITE, &telem_ctrl,
+ sizeof(telem_ctrl), NULL, 0);
if (ret) {
pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n");
return ret;
@@ -318,10 +311,9 @@ static int telemetry_setup_iossevtconfig(struct telemetry_evtconfig evtconfig,
/* Clear All Events */
TELEM_CLEAR_EVENTS(telem_ctrl);
- ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
+ ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
IOSS_TELEM_EVENT_CTL_WRITE,
- (u8 *)&telem_ctrl,
- IOSS_TELEM_EVT_CTRL_WRITE_SIZE,
+ &telem_ctrl, sizeof(telem_ctrl),
NULL, 0);
if (ret) {
pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n");
@@ -347,10 +339,9 @@ static int telemetry_setup_iossevtconfig(struct telemetry_evtconfig evtconfig,
/* Clear All Events */
TELEM_CLEAR_EVENTS(telem_ctrl);
- ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
+ ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
IOSS_TELEM_EVENT_CTL_WRITE,
- (u8 *)&telem_ctrl,
- IOSS_TELEM_EVT_CTRL_WRITE_SIZE,
+ &telem_ctrl, sizeof(telem_ctrl),
NULL, 0);
if (ret) {
pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n");
@@ -399,10 +390,9 @@ static int telemetry_setup_iossevtconfig(struct telemetry_evtconfig evtconfig,
TELEM_ENABLE_PERIODIC(telem_ctrl);
telem_ctrl |= ioss_period;
- ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
+ ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
IOSS_TELEM_EVENT_CTL_WRITE,
- (u8 *)&telem_ctrl,
- IOSS_TELEM_EVT_CTRL_WRITE_SIZE, NULL, 0);
+ &telem_ctrl, sizeof(telem_ctrl), NULL, 0);
if (ret) {
pr_err("IOSS TELEM_CTRL Event Enable Write Failed\n");
return ret;
@@ -589,8 +579,9 @@ static int telemetry_setup(struct platform_device *pdev)
u32 read_buf, events, event_regs;
int ret;
- ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY, IOSS_TELEM_INFO_READ,
- NULL, 0, &read_buf, IOSS_TELEM_READ_WORD);
+ ret = intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM,
+ IOSS_TELEM_INFO_READ, NULL, 0,
+ &read_buf, sizeof(read_buf));
if (ret) {
dev_err(&pdev->dev, "IOSS TELEM_INFO Read Failed\n");
return ret;
@@ -684,6 +675,8 @@ static int telemetry_plt_set_sampling_period(u8 pss_period, u8 ioss_period)
mutex_lock(&(telm_conf->telem_lock));
if (ioss_period) {
+ struct intel_scu_ipc_dev *scu = telm_conf->scu;
+
if (TELEM_SAMPLE_PERIOD_INVALID(ioss_period)) {
pr_err("IOSS Sampling Period Out of Range\n");
ret = -EINVAL;
@@ -691,9 +684,9 @@ static int telemetry_plt_set_sampling_period(u8 pss_period, u8 ioss_period)
}
/* Get telemetry EVENT CTL */
- ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
+ ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
IOSS_TELEM_EVENT_CTL_READ, NULL, 0,
- &telem_ctrl, IOSS_TELEM_READ_WORD);
+ &telem_ctrl, sizeof(telem_ctrl));
if (ret) {
pr_err("IOSS TELEM_CTRL Read Failed\n");
goto out;
@@ -702,11 +695,10 @@ static int telemetry_plt_set_sampling_period(u8 pss_period, u8 ioss_period)
/* Disable Telemetry */
TELEM_DISABLE(telem_ctrl);
- ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
- IOSS_TELEM_EVENT_CTL_WRITE,
- (u8 *)&telem_ctrl,
- IOSS_TELEM_EVT_CTRL_WRITE_SIZE,
- NULL, 0);
+ ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
+ IOSS_TELEM_EVENT_CTL_WRITE,
+ &telem_ctrl, sizeof(telem_ctrl),
+ NULL, 0);
if (ret) {
pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n");
goto out;
@@ -718,11 +710,10 @@ static int telemetry_plt_set_sampling_period(u8 pss_period, u8 ioss_period)
TELEM_ENABLE_PERIODIC(telem_ctrl);
telem_ctrl |= ioss_period;
- ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
- IOSS_TELEM_EVENT_CTL_WRITE,
- (u8 *)&telem_ctrl,
- IOSS_TELEM_EVT_CTRL_WRITE_SIZE,
- NULL, 0);
+ ret = intel_scu_ipc_dev_command(scu, IOSS_TELEM,
+ IOSS_TELEM_EVENT_CTL_WRITE,
+ &telem_ctrl, sizeof(telem_ctrl),
+ NULL, 0);
if (ret) {
pr_err("IOSS TELEM_CTRL Event Enable Write Failed\n");
goto out;
@@ -1017,9 +1008,9 @@ static int telemetry_plt_get_trace_verbosity(enum telemetry_unit telem_unit,
break;
case TELEM_IOSS:
- ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
- IOSS_TELEM_TRACE_CTL_READ, NULL, 0, &temp,
- IOSS_TELEM_READ_WORD);
+ ret = intel_scu_ipc_dev_command(telm_conf->scu,
+ IOSS_TELEM, IOSS_TELEM_TRACE_CTL_READ,
+ NULL, 0, &temp, sizeof(temp));
if (ret) {
pr_err("IOSS TRACE_CTL Read Failed\n");
goto out;
@@ -1071,9 +1062,9 @@ static int telemetry_plt_set_trace_verbosity(enum telemetry_unit telem_unit,
break;
case TELEM_IOSS:
- ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
- IOSS_TELEM_TRACE_CTL_READ, NULL, 0, &temp,
- IOSS_TELEM_READ_WORD);
+ ret = intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM,
+ IOSS_TELEM_TRACE_CTL_READ,
+ NULL, 0, &temp, sizeof(temp));
if (ret) {
pr_err("IOSS TRACE_CTL Read Failed\n");
goto out;
@@ -1082,9 +1073,9 @@ static int telemetry_plt_set_trace_verbosity(enum telemetry_unit telem_unit,
TELEM_CLEAR_VERBOSITY_BITS(temp);
TELEM_SET_VERBOSITY_BITS(temp, verbosity);
- ret = intel_pmc_ipc_command(PMC_IPC_PMC_TELEMTRY,
- IOSS_TELEM_TRACE_CTL_WRITE, (u8 *)&temp,
- IOSS_TELEM_WRITE_FOURBYTES, NULL, 0);
+ ret = intel_scu_ipc_dev_command(telm_conf->scu, IOSS_TELEM,
+ IOSS_TELEM_TRACE_CTL_WRITE,
+ &temp, sizeof(temp), NULL, 0);
if (ret) {
pr_err("IOSS TRACE_CTL Verbosity Set Failed\n");
goto out;
@@ -1139,6 +1130,12 @@ static int telemetry_pltdrv_probe(struct platform_device *pdev)
telm_conf->ioss_config.regmap = mem;
+ telm_conf->scu = devm_intel_scu_ipc_dev_get(&pdev->dev);
+ if (!telm_conf->scu) {
+ ret = -EPROBE_DEFER;
+ goto out;
+ }
+
mutex_init(&telm_conf->telem_lock);
mutex_init(&telm_conf->telem_trace_lock);
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 14/19] platform/x86: intel_pmc_ipc: Drop intel_pmc_ipc_command()
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (12 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 13/19] platform/x86: intel_telemetry: " Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 15/19] x86/platform/intel-mid: Add empty stubs for intel_scu_devices_[create|destroy]() Mika Westerberg
` (5 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
Now that all callers have been converted over to the SCU IPC API we can
drop intel_pmc_ipc_command().
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
arch/x86/include/asm/intel_pmc_ipc.h | 8 --------
drivers/platform/x86/intel_pmc_ipc.c | 20 --------------------
2 files changed, 28 deletions(-)
diff --git a/arch/x86/include/asm/intel_pmc_ipc.h b/arch/x86/include/asm/intel_pmc_ipc.h
index ddc964b9c78c..22848df5faaf 100644
--- a/arch/x86/include/asm/intel_pmc_ipc.h
+++ b/arch/x86/include/asm/intel_pmc_ipc.h
@@ -27,19 +27,11 @@
#if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
-int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
- u32 *out, u32 outlen);
int intel_pmc_s0ix_counter_read(u64 *data);
int intel_pmc_gcr_read64(u32 offset, u64 *data);
#else
-static inline int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
- u32 *out, u32 outlen)
-{
- return -EINVAL;
-}
-
static inline int intel_pmc_s0ix_counter_read(u64 *data)
{
return -EINVAL;
diff --git a/drivers/platform/x86/intel_pmc_ipc.c b/drivers/platform/x86/intel_pmc_ipc.c
index ea85b854c4c6..3ec7a0d1e9b0 100644
--- a/drivers/platform/x86/intel_pmc_ipc.c
+++ b/drivers/platform/x86/intel_pmc_ipc.c
@@ -194,26 +194,6 @@ static int update_no_reboot_bit(void *priv, bool set)
PMC_CFG_NO_REBOOT_MASK, value);
}
-/**
- * intel_pmc_ipc_command() - IPC command with input/output data
- * @cmd: IPC command code.
- * @sub: IPC command sub type.
- * @in: input data of this IPC command.
- * @inlen: input data length in bytes.
- * @out: output data of this IPC command.
- * @outlen: output data length in dwords.
- *
- * Send an IPC command to PMC with input/output data.
- *
- * Return: an IPC error code or 0 on success.
- */
-int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
- u32 *out, u32 outlen)
-{
- return intel_scu_ipc_dev_command(NULL, cmd, sub, in, inlen, out, outlen);
-}
-EXPORT_SYMBOL_GPL(intel_pmc_ipc_command);
-
static int ipc_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct intel_pmc_ipc_dev *pmc = &ipcdev;
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 15/19] x86/platform/intel-mid: Add empty stubs for intel_scu_devices_[create|destroy]()
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (13 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 14/19] platform/x86: intel_pmc_ipc: Drop intel_pmc_ipc_command() Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 16/19] platform/x86: intel_pmc_ipc: Move PCI IDs to intel_scu_pcidrv.c Mika Westerberg
` (4 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
This allows to call the functions even when CONFIG_X86_INTEL_MID is not
enabled.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
arch/x86/include/asm/intel-mid.h | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index 8e5af119dc2d..de58391bdee0 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -88,11 +88,17 @@ static inline bool intel_mid_has_msic(void)
return (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL);
}
+extern void intel_scu_devices_create(void);
+extern void intel_scu_devices_destroy(void);
+
#else /* !CONFIG_X86_INTEL_MID */
#define intel_mid_identify_cpu() 0
#define intel_mid_has_msic() 0
+static inline void intel_scu_devices_create(void) { }
+static inline void intel_scu_devices_destroy(void) { }
+
#endif /* !CONFIG_X86_INTEL_MID */
enum intel_mid_timer_options {
@@ -115,9 +121,6 @@ extern enum intel_mid_timer_options intel_mid_timer_options;
#define SFI_MTMR_MAX_NUM 8
#define SFI_MRTC_MAX 8
-extern void intel_scu_devices_create(void);
-extern void intel_scu_devices_destroy(void);
-
/* VRTC timer */
#define MRST_VRTC_MAP_SZ 1024
/* #define MRST_VRTC_PGOFFSET 0xc00 */
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 16/19] platform/x86: intel_pmc_ipc: Move PCI IDs to intel_scu_pcidrv.c
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (14 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 15/19] x86/platform/intel-mid: Add empty stubs for intel_scu_devices_[create|destroy]() Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 17/19] platform/x86: intel_telemetry: Add telemetry_get_pltdata() Mika Westerberg
` (3 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
The PCI probe driver in intel_pmc_ipc.c is a duplicate of what we
already have in intel_scu_pcidrv.c with the exception that the later also
creates SCU specific devices. Move the PCI IDs from the intel_pmc_ipc.c
to intel_scu.c and use driver_data to detect whether SCU devices need to
be created or not.
Also update Kconfig entry to mention all platforms supported by the
Intel SCU PCI driver and change dependency from X86_INTEL_MID to PCI
which is more generic.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/platform/x86/Kconfig | 13 ++++--
drivers/platform/x86/intel_pmc_ipc.c | 61 +------------------------
drivers/platform/x86/intel_scu_pcidrv.c | 21 +++++++--
3 files changed, 27 insertions(+), 68 deletions(-)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 07bfad7d8106..13681f4ec2c5 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1321,7 +1321,7 @@ config INTEL_PMC_CORE
config INTEL_PMC_IPC
tristate "Intel PMC IPC Driver"
- depends on ACPI && PCI
+ depends on ACPI
select INTEL_SCU_IPC
---help---
This driver provides support for PMC control on some Intel platforms.
@@ -1343,13 +1343,18 @@ config INTEL_SCU
config INTEL_SCU_PCI
bool "Intel SCU PCI driver"
- depends on X86_INTEL_MID
+ depends on PCI
select INTEL_SCU
help
This driver is used to bridge the communications between kernel
and SCU on some embedded Intel x86 platforms. It also creates
- devices that are connected to the SoC through the SCU. This is
- not needed for PC-type machines.
+ devices that are connected to the SoC through the SCU.
+ Platforms supported:
+ Medfield
+ Clovertrail
+ Merrifield
+ Broxton
+ Apollo Lake
config INTEL_SCU_IPC_UTIL
tristate "Intel SCU IPC utility driver"
diff --git a/drivers/platform/x86/intel_pmc_ipc.c b/drivers/platform/x86/intel_pmc_ipc.c
index 3ec7a0d1e9b0..c006609ef74b 100644
--- a/drivers/platform/x86/intel_pmc_ipc.c
+++ b/drivers/platform/x86/intel_pmc_ipc.c
@@ -17,7 +17,6 @@
#include <linux/interrupt.h>
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/module.h>
-#include <linux/pci.h>
#include <linux/platform_device.h>
#include <asm/intel_pmc_ipc.h>
@@ -194,50 +193,6 @@ static int update_no_reboot_bit(void *priv, bool set)
PMC_CFG_NO_REBOOT_MASK, value);
}
-static int ipc_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
- struct intel_pmc_ipc_dev *pmc = &ipcdev;
- struct intel_scu_ipc_pdata pdata = {};
- struct intel_scu_ipc_dev *scu;
- int ret;
-
- /* Only one PMC is supported */
- if (pmc->dev)
- return -EBUSY;
-
- spin_lock_init(&ipcdev.gcr_lock);
-
- ret = pcim_enable_device(pdev);
- if (ret)
- return ret;
-
- pdata.mem = pdev->resource[0];
-
- scu = devm_intel_scu_ipc_register(&pdev->dev, &pdata);
- if (IS_ERR(scu))
- return PTR_ERR(scu);
-
- pmc->dev = &pdev->dev;
-
- pci_set_drvdata(pdev, pmc);
-
- return 0;
-}
-
-static const struct pci_device_id ipc_pci_ids[] = {
- {PCI_VDEVICE(INTEL, 0x0a94), 0},
- {PCI_VDEVICE(INTEL, 0x1a94), 0},
- {PCI_VDEVICE(INTEL, 0x5a94), 0},
- { 0,}
-};
-MODULE_DEVICE_TABLE(pci, ipc_pci_ids);
-
-static struct pci_driver ipc_pci_driver = {
- .name = "intel_pmc_ipc",
- .id_table = ipc_pci_ids,
- .probe = ipc_pci_probe,
-};
-
static ssize_t intel_pmc_ipc_simple_cmd_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
@@ -673,25 +628,11 @@ static struct platform_driver ipc_plat_driver = {
static int __init intel_pmc_ipc_init(void)
{
- int ret;
-
- ret = platform_driver_register(&ipc_plat_driver);
- if (ret) {
- pr_err("Failed to register PMC ipc platform driver\n");
- return ret;
- }
- ret = pci_register_driver(&ipc_pci_driver);
- if (ret) {
- pr_err("Failed to register PMC ipc pci driver\n");
- platform_driver_unregister(&ipc_plat_driver);
- return ret;
- }
- return ret;
+ return platform_driver_register(&ipc_plat_driver);
}
static void __exit intel_pmc_ipc_exit(void)
{
- pci_unregister_driver(&ipc_pci_driver);
platform_driver_unregister(&ipc_plat_driver);
}
diff --git a/drivers/platform/x86/intel_scu_pcidrv.c b/drivers/platform/x86/intel_scu_pcidrv.c
index b869ec2eda0e..8c5fd8240da9 100644
--- a/drivers/platform/x86/intel_scu_pcidrv.c
+++ b/drivers/platform/x86/intel_scu_pcidrv.c
@@ -17,6 +17,7 @@
static int intel_scu_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
+ void (*setup_fn)(void) = (void (*)(void))id->driver_data;
struct intel_scu_ipc_data scu_data = {};
struct intel_scu_ipc_dev *scu;
int ret;
@@ -32,14 +33,26 @@ static int intel_scu_pci_probe(struct pci_dev *pdev,
if (IS_ERR(scu))
return PTR_ERR(scu);
- intel_scu_devices_create();
+ if (setup_fn)
+ setup_fn();
return 0;
}
+static void intel_mid_scu_setup(void)
+{
+ intel_scu_devices_create();
+}
+
static const struct pci_device_id pci_ids[] = {
- { PCI_VDEVICE(INTEL, 0x080e) },
- { PCI_VDEVICE(INTEL, 0x08ea) },
- { PCI_VDEVICE(INTEL, 0x11a0) },
+ { PCI_VDEVICE(INTEL, 0x080e),
+ .driver_data = (kernel_ulong_t)intel_mid_scu_setup },
+ { PCI_VDEVICE(INTEL, 0x08ea),
+ .driver_data = (kernel_ulong_t)intel_mid_scu_setup },
+ { PCI_VDEVICE(INTEL, 0x0a94) },
+ { PCI_VDEVICE(INTEL, 0x11a0),
+ .driver_data = (kernel_ulong_t)intel_mid_scu_setup },
+ { PCI_VDEVICE(INTEL, 0x1a94) },
+ { PCI_VDEVICE(INTEL, 0x5a94) },
{}
};
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 17/19] platform/x86: intel_telemetry: Add telemetry_get_pltdata()
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (15 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 16/19] platform/x86: intel_pmc_ipc: Move PCI IDs to intel_scu_pcidrv.c Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-03 13:36 ` [PATCH v8 18/19] platform/x86: intel_pmc_ipc: Convert to MFD Mika Westerberg
` (2 subsequent siblings)
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
Add new function that allows telemetry modules to get pointer to the
platform specific configuration. This is needed to allow the telemetry
debugfs module to fetch PMC IPC instance in the subsequent patch.
This also allows us to replace telemetry_pltconfig_valid() with
telemetry_get_pltdata() as well.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
arch/x86/include/asm/intel_telemetry.h | 2 +-
drivers/platform/x86/intel_telemetry_core.c | 17 ++++++-----------
drivers/platform/x86/intel_telemetry_debugfs.c | 3 +--
3 files changed, 8 insertions(+), 14 deletions(-)
diff --git a/arch/x86/include/asm/intel_telemetry.h b/arch/x86/include/asm/intel_telemetry.h
index 274aaf0dae48..2c0e7d7a10e9 100644
--- a/arch/x86/include/asm/intel_telemetry.h
+++ b/arch/x86/include/asm/intel_telemetry.h
@@ -95,7 +95,7 @@ int telemetry_set_pltdata(const struct telemetry_core_ops *ops,
int telemetry_clear_pltdata(void);
-int telemetry_pltconfig_valid(void);
+struct telemetry_plt_config *telemetry_get_pltdata(void);
int telemetry_get_evtname(enum telemetry_unit telem_unit,
const char **name, int len);
diff --git a/drivers/platform/x86/intel_telemetry_core.c b/drivers/platform/x86/intel_telemetry_core.c
index d4040bb222b4..fdf55b5d6948 100644
--- a/drivers/platform/x86/intel_telemetry_core.c
+++ b/drivers/platform/x86/intel_telemetry_core.c
@@ -353,21 +353,16 @@ int telemetry_clear_pltdata(void)
EXPORT_SYMBOL_GPL(telemetry_clear_pltdata);
/**
- * telemetry_pltconfig_valid() - Checkif platform config is valid
+ * telemetry_get_pltdata() - Return telemetry platform config
*
- * Usage by other than telemetry module is invalid
- *
- * Return: 0 success, < 0 for failure
+ * May be used by other telemetry modules to get platform specific
+ * configuration.
*/
-int telemetry_pltconfig_valid(void)
+struct telemetry_plt_config *telemetry_get_pltdata(void)
{
- if (telm_core_conf.plt_config)
- return 0;
-
- else
- return -EINVAL;
+ return telm_core_conf.plt_config;
}
-EXPORT_SYMBOL_GPL(telemetry_pltconfig_valid);
+EXPORT_SYMBOL_GPL(telemetry_get_pltdata);
static inline int telemetry_get_pssevtname(enum telemetry_unit telem_unit,
const char **name, int len)
diff --git a/drivers/platform/x86/intel_telemetry_debugfs.c b/drivers/platform/x86/intel_telemetry_debugfs.c
index 8e3fb55ac1ae..85a456aa0ab9 100644
--- a/drivers/platform/x86/intel_telemetry_debugfs.c
+++ b/drivers/platform/x86/intel_telemetry_debugfs.c
@@ -911,8 +911,7 @@ static int __init telemetry_debugfs_init(void)
debugfs_conf = (struct telemetry_debugfs_conf *)id->driver_data;
- err = telemetry_pltconfig_valid();
- if (err < 0) {
+ if (!telemetry_get_pltdata()) {
pr_info("Invalid pltconfig, ensure IPC1 device is enabled in BIOS\n");
return -ENODEV;
}
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v8 18/19] platform/x86: intel_pmc_ipc: Convert to MFD
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (16 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 17/19] platform/x86: intel_telemetry: Add telemetry_get_pltdata() Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-24 10:26 ` Andy Shevchenko
2020-03-24 11:52 ` Lee Jones
2020-03-03 13:36 ` [PATCH v8 19/19] MAINTAINERS: Update entry for Intel Broxton PMC driver Mika Westerberg
2020-03-17 8:43 ` [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
19 siblings, 2 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
This driver only creates a bunch of platform devices sharing resources
belonging to the PMC device. This is pretty much what MFD subsystem is
for so move the driver there, renaming it to intel_pmc_bxt.c which
should be more clear what it is.
MFD subsystem provides nice helper APIs for subdevice creation so
convert the driver to use those. Unfortunately the ACPI device includes
separate resources for most of the subdevices so we cannot simply call
mfd_add_devices() to create all of them but instead we need to call it
separately for each device.
The new MFD driver continues to expose two sysfs attributes that allow
userspace to send IPC commands to the PMC/SCU to avoid breaking any
existing applications that may use these. Generally this is bad idea so
document this in the ABI documentation.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
.../ABI/obsolete/sysfs-driver-intel_pmc_bxt | 22 +
arch/x86/include/asm/intel_pmc_ipc.h | 47 --
arch/x86/include/asm/intel_telemetry.h | 1 +
drivers/mfd/Kconfig | 16 +-
drivers/mfd/Makefile | 1 +
drivers/mfd/intel_pmc_bxt.c | 504 ++++++++++++++
drivers/platform/x86/Kconfig | 16 +-
drivers/platform/x86/Makefile | 1 -
drivers/platform/x86/intel_pmc_ipc.c | 645 ------------------
.../platform/x86/intel_telemetry_debugfs.c | 12 +-
drivers/platform/x86/intel_telemetry_pltdrv.c | 2 +
drivers/usb/typec/tcpm/Kconfig | 2 +-
include/linux/mfd/intel_pmc_bxt.h | 43 ++
13 files changed, 602 insertions(+), 710 deletions(-)
create mode 100644 Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
delete mode 100644 arch/x86/include/asm/intel_pmc_ipc.h
create mode 100644 drivers/mfd/intel_pmc_bxt.c
delete mode 100644 drivers/platform/x86/intel_pmc_ipc.c
create mode 100644 include/linux/mfd/intel_pmc_bxt.h
diff --git a/Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt b/Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
new file mode 100644
index 000000000000..39d5659f388b
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
@@ -0,0 +1,22 @@
+These files allow sending arbitrary IPC commands to the PMC/SCU which
+may be dangerous. These will be removed eventually and should not be
+used in any new applications.
+
+What: /sys/bus/platform/devices/INT34D2:00/simplecmd
+Date: Jun 2015
+KernelVersion: 4.1
+Contact: Mika Westerberg <mika.westerberg@linux.intel.com>
+Description: This interface allows userspace to send an arbitrary
+ IPC command to the PMC/SCU.
+
+ Format: %d %d where first number is command and
+ second number is subcommand.
+
+What: /sys/bus/platform/devices/INT34D2:00/northpeak
+Date: Jun 2015
+KernelVersion: 4.1
+Contact: Mika Westerberg <mika.westerberg@linux.intel.com>
+Description: This interface allows userspace to enable and disable
+ Northpeak through the PMC/SCU.
+
+ Format: %u.
diff --git a/arch/x86/include/asm/intel_pmc_ipc.h b/arch/x86/include/asm/intel_pmc_ipc.h
deleted file mode 100644
index 22848df5faaf..000000000000
--- a/arch/x86/include/asm/intel_pmc_ipc.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_X86_INTEL_PMC_IPC_H_
-#define _ASM_X86_INTEL_PMC_IPC_H_
-
-/* Commands */
-#define PMC_IPC_USB_PWR_CTRL 0xF0
-#define PMC_IPC_PMIC_BLACKLIST_SEL 0xEF
-#define PMC_IPC_PHY_CONFIG 0xEE
-#define PMC_IPC_NORTHPEAK_CTRL 0xED
-#define PMC_IPC_PM_DEBUG 0xEC
-#define PMC_IPC_PMC_FW_MSG_CTRL 0xEA
-
-/* IPC return code */
-#define IPC_ERR_NONE 0
-#define IPC_ERR_CMD_NOT_SUPPORTED 1
-#define IPC_ERR_CMD_NOT_SERVICED 2
-#define IPC_ERR_UNABLE_TO_SERVICE 3
-#define IPC_ERR_CMD_INVALID 4
-#define IPC_ERR_CMD_FAILED 5
-#define IPC_ERR_EMSECURITY 6
-#define IPC_ERR_UNSIGNEDKERNEL 7
-
-/* GCR reg offsets from gcr base*/
-#define PMC_GCR_PMC_CFG_REG 0x08
-#define PMC_GCR_TELEM_DEEP_S0IX_REG 0x78
-#define PMC_GCR_TELEM_SHLW_S0IX_REG 0x80
-
-#if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
-
-int intel_pmc_s0ix_counter_read(u64 *data);
-int intel_pmc_gcr_read64(u32 offset, u64 *data);
-
-#else
-
-static inline int intel_pmc_s0ix_counter_read(u64 *data)
-{
- return -EINVAL;
-}
-
-static inline int intel_pmc_gcr_read64(u32 offset, u64 *data)
-{
- return -EINVAL;
-}
-
-#endif /*CONFIG_INTEL_PMC_IPC*/
-
-#endif
diff --git a/arch/x86/include/asm/intel_telemetry.h b/arch/x86/include/asm/intel_telemetry.h
index 2c0e7d7a10e9..8046e70dfd7c 100644
--- a/arch/x86/include/asm/intel_telemetry.h
+++ b/arch/x86/include/asm/intel_telemetry.h
@@ -53,6 +53,7 @@ struct telemetry_plt_config {
struct telemetry_unit_config ioss_config;
struct mutex telem_trace_lock;
struct mutex telem_lock;
+ struct intel_pmc_dev *pmc;
struct intel_scu_ipc_dev *scu;
bool telem_in_use;
};
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 20b294ef2873..d41a965d819b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -551,7 +551,7 @@ config INTEL_SOC_PMIC
config INTEL_SOC_PMIC_BXTWC
tristate "Support for Intel Broxton Whiskey Cove PMIC"
- depends on INTEL_PMC_IPC
+ depends on MFD_INTEL_PMC_BXT
select MFD_CORE
select REGMAP_IRQ
help
@@ -632,6 +632,20 @@ config MFD_INTEL_MSIC
Passage) chip. This chip embeds audio, battery, GPIO, etc.
devices used in Intel Medfield platforms.
+config MFD_INTEL_PMC_BXT
+ tristate "Intel PMC Driver for Broxton"
+ depends on X86
+ depends on X86_PLATFORM_DEVICES
+ depends on ACPI
+ select INTEL_SCU_IPC
+ select MFD_CORE
+ help
+ This driver provides support for the PMC (Power Management
+ Controller) on Intel Broxton and Apollo Lake. The PMC is a
+ multi-function device that exposes IPC, General Control
+ Register and P-unit access. In addition this creates devices
+ for iTCO watchdog and telemetry that are part of the PMC.
+
config MFD_IPAQ_MICRO
bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
depends on SA1100_H3100 || SA1100_H3600
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b83f172545e1..444264d42a20 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -212,6 +212,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
+obj-$(CONFIG_MFD_INTEL_PMC_BXT) += intel_pmc_bxt.o
obj-$(CONFIG_MFD_PALMAS) += palmas.o
obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
diff --git a/drivers/mfd/intel_pmc_bxt.c b/drivers/mfd/intel_pmc_bxt.c
new file mode 100644
index 000000000000..626104476600
--- /dev/null
+++ b/drivers/mfd/intel_pmc_bxt.c
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Intel Broxton PMC
+ *
+ * (C) Copyright 2014 - 2020 Intel Corporation
+ *
+ * This driver is based on Intel SCU IPC driver (intel_scu_ipc.c) by
+ * Sreedhara DS <sreedhara.ds@intel.com>
+ *
+ * The PMC (Power Management Controller) running on the ARC processor
+ * communicates with another entity running in the IA (Intel Architecture)
+ * core through an IPC (Intel Processor Communications) mechanism which in
+ * turn sends messages between the IA and the PMC.
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel_pmc_bxt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/itco_wdt.h>
+
+#include <asm/intel_scu_ipc.h>
+
+/* Residency with clock rate at 19.2MHz to usecs */
+#define S0IX_RESIDENCY_IN_USECS(d, s) \
+({ \
+ u64 result = 10ull * ((d) + (s)); \
+ do_div(result, 192); \
+ result; \
+})
+
+/* Resources exported from IFWI */
+#define PLAT_RESOURCE_IPC_INDEX 0
+#define PLAT_RESOURCE_IPC_SIZE 0x1000
+#define PLAT_RESOURCE_GCR_OFFSET 0x1000
+#define PLAT_RESOURCE_GCR_SIZE 0x1000
+#define PLAT_RESOURCE_BIOS_DATA_INDEX 1
+#define PLAT_RESOURCE_BIOS_IFACE_INDEX 2
+#define PLAT_RESOURCE_TELEM_SSRAM_INDEX 3
+#define PLAT_RESOURCE_ISP_DATA_INDEX 4
+#define PLAT_RESOURCE_ISP_IFACE_INDEX 5
+#define PLAT_RESOURCE_GTD_DATA_INDEX 6
+#define PLAT_RESOURCE_GTD_IFACE_INDEX 7
+#define PLAT_RESOURCE_ACPI_IO_INDEX 0
+
+/*
+ * BIOS does not create an ACPI device for each PMC function, but
+ * exports multiple resources from one ACPI device (IPC) for multiple
+ * functions. This driver is responsible for creating a child device and
+ * to export resources for those functions.
+ */
+#define SMI_EN_OFFSET 0x0040
+#define SMI_EN_SIZE 4
+#define TCO_BASE_OFFSET 0x0060
+#define TCO_REGS_SIZE 16
+#define TELEM_SSRAM_SIZE 240
+#define TELEM_PMC_SSRAM_OFFSET 0x1B00
+#define TELEM_PUNIT_SSRAM_OFFSET 0x1A00
+
+/* Commands */
+#define PMC_NORTHPEAK_CTRL 0xED
+
+/* PMC_CFG_REG bit masks */
+#define PMC_CFG_NO_REBOOT_EN BIT(4)
+
+static inline bool is_gcr_valid(u32 offset)
+{
+ return offset < PLAT_RESOURCE_GCR_SIZE - 8;
+}
+
+/**
+ * intel_pmc_gcr_read64() - Read a 64-bit PMC GCR register
+ * @pmc: PMC device pointer
+ * @offset: offset of GCR register from GCR address base
+ * @data: data pointer for storing the register output
+ *
+ * Reads the 64-bit PMC GCR register at given offset.
+ *
+ * Return: Negative value on error or 0 on success.
+ */
+int intel_pmc_gcr_read64(struct intel_pmc_dev *pmc, u32 offset, u64 *data)
+{
+ if (!is_gcr_valid(offset))
+ return -EINVAL;
+
+ spin_lock(&pmc->gcr_lock);
+ *data = readq(pmc->gcr_mem_base + offset);
+ spin_unlock(&pmc->gcr_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(intel_pmc_gcr_read64);
+
+/**
+ * intel_pmc_gcr_update() - Update PMC GCR register bits
+ * @pmc: PMC device pointer
+ * @offset: offset of GCR register from GCR address base
+ * @mask: bit mask for update operation
+ * @val: update value
+ *
+ * Updates the bits of given GCR register as specified by
+ * @mask and @val.
+ *
+ * Return: Negative value on error or 0 on success.
+ */
+static int intel_pmc_gcr_update(struct intel_pmc_dev *pmc, u32 offset, u32 mask,
+ u32 val)
+{
+ u32 new_val;
+
+ if (!is_gcr_valid(offset))
+ return -EINVAL;
+
+ spin_lock(&pmc->gcr_lock);
+ new_val = readl(pmc->gcr_mem_base + offset);
+
+ new_val = (new_val & ~mask) | (val & mask);
+ writel(new_val, pmc->gcr_mem_base + offset);
+
+ new_val = readl(pmc->gcr_mem_base + offset);
+ spin_unlock(&pmc->gcr_lock);
+
+ /* Check whether the bit update is successful */
+ return (new_val & mask) != (val & mask) ? -EIO : 0;
+}
+
+/**
+ * intel_pmc_s0ix_counter_read() - Read S0ix residency
+ * @pmc: PMC device pointer
+ * @data: Out param that contains current S0ix residency count.
+ *
+ * Writes to @data how many usecs the system has been in low-power S0ix
+ * state.
+ *
+ * Return: An error code or 0 on success.
+ */
+int intel_pmc_s0ix_counter_read(struct intel_pmc_dev *pmc, u64 *data)
+{
+ u64 deep, shlw;
+
+ spin_lock(&pmc->gcr_lock);
+ deep = readq(pmc->gcr_mem_base + PMC_GCR_TELEM_DEEP_S0IX_REG);
+ shlw = readq(pmc->gcr_mem_base + PMC_GCR_TELEM_SHLW_S0IX_REG);
+ spin_unlock(&pmc->gcr_lock);
+
+ *data = S0IX_RESIDENCY_IN_USECS(deep, shlw);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(intel_pmc_s0ix_counter_read);
+
+/**
+ * simplecmd_store() - Send a simple IPC command
+ * @dev: Device under the attribute is
+ * @attr: Attribute in question
+ * @buf: Buffer holding data to be stored to the attribute
+ * @count: Number of bytes in @buf
+ *
+ * Expects a string with two integers separated with space. These two
+ * values hold command and subcommand that is send to PMC.
+ *
+ * Return: Number number of bytes written (@count) or negative errno in
+ * case of error.
+ */
+static ssize_t simplecmd_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct intel_pmc_dev *pmc = dev_get_drvdata(dev);
+ struct intel_scu_ipc_dev *scu = pmc->scu;
+ int subcmd;
+ int cmd;
+ int ret;
+
+ ret = sscanf(buf, "%d %d", &cmd, &subcmd);
+ if (ret != 2) {
+ dev_err(dev, "Invalid values, expected: cmd subcmd\n");
+ return -EINVAL;
+ }
+
+ ret = intel_scu_ipc_dev_simple_command(scu, cmd, subcmd);
+ if (ret)
+ return ret;
+
+ return count;
+}
+static DEVICE_ATTR_WO(simplecmd);
+
+/**
+ * northpeak_store() - Enable or disable Northpeak
+ * @dev: Device under the attribute is
+ * @attr: Attribute in question
+ * @buf: Buffer holding data to be stored to the attribute
+ * @count: Number of bytes in @buf
+ *
+ * Expects an unsigned integer. Non-zero enables Northpeak and zero
+ * disables it.
+ *
+ * Return: Number number of bytes written (@count) or negative errno in
+ * case of error.
+ */
+static ssize_t northpeak_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct intel_pmc_dev *pmc = dev_get_drvdata(dev);
+ struct intel_scu_ipc_dev *scu = pmc->scu;
+ unsigned long val;
+ int subcmd;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &val);
+ if (ret)
+ return ret;
+
+ /* Northpeak is enabled if subcmd == 1 and disabled if it is 0 */
+ if (val)
+ subcmd = 1;
+ else
+ subcmd = 0;
+
+ ret = intel_scu_ipc_dev_simple_command(scu, PMC_NORTHPEAK_CTRL, subcmd);
+ if (ret)
+ return ret;
+
+ return count;
+}
+static DEVICE_ATTR_WO(northpeak);
+
+static struct attribute *intel_pmc_attrs[] = {
+ &dev_attr_northpeak.attr,
+ &dev_attr_simplecmd.attr,
+ NULL
+};
+
+static const struct attribute_group intel_pmc_group = {
+ .attrs = intel_pmc_attrs,
+};
+
+static const struct attribute_group *intel_pmc_groups[] = {
+ &intel_pmc_group,
+ NULL
+};
+
+/*
+ * We use the below templates to construct MFD cells. The struct
+ * intel_pmc_dev instance holds the real MFD cells where we first copy
+ * these and then fill the dynamic parts based on the extracted resources.
+ */
+
+static const struct mfd_cell punit = {
+ .name = "intel_punit_ipc",
+};
+
+static int update_no_reboot_bit(void *priv, bool set)
+{
+ struct intel_pmc_dev *pmc = priv;
+ u32 bits = PMC_CFG_NO_REBOOT_EN;
+ u32 value = set ? bits : 0;
+
+ return intel_pmc_gcr_update(pmc, PMC_GCR_PMC_CFG_REG, bits, value);
+}
+
+static const struct itco_wdt_platform_data tco_pdata = {
+ .name = "Apollo Lake SoC",
+ .version = 5,
+ .update_no_reboot_bit = update_no_reboot_bit,
+};
+
+static const struct mfd_cell tco = {
+ .name = "iTCO_wdt",
+ .ignore_resource_conflicts = true,
+};
+
+static const struct resource telem_res[] = {
+ DEFINE_RES_MEM(TELEM_PUNIT_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
+ DEFINE_RES_MEM(TELEM_PMC_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
+};
+
+static const struct mfd_cell telem = {
+ .name = "intel_telemetry",
+ .resources = telem_res,
+ .num_resources = ARRAY_SIZE(telem_res),
+};
+
+static int intel_pmc_get_tco_resources(struct platform_device *pdev,
+ struct intel_pmc_dev *pmc)
+{
+ struct itco_wdt_platform_data *pdata;
+ struct resource *res, *tco_res;
+
+ if (acpi_has_watchdog())
+ return 0;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO,
+ PLAT_RESOURCE_ACPI_IO_INDEX);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get IO resource\n");
+ return -EINVAL;
+ }
+
+ tco_res = devm_kcalloc(&pdev->dev, 2, sizeof(*tco_res), GFP_KERNEL);
+ if (!tco_res)
+ return -ENOMEM;
+
+ tco_res[0].flags = IORESOURCE_IO;
+ tco_res[0].start = res->start + TCO_BASE_OFFSET;
+ tco_res[0].end = tco_res[0].start + TCO_REGS_SIZE - 1;
+ tco_res[1].flags = IORESOURCE_IO;
+ tco_res[1].start = res->start + SMI_EN_OFFSET;
+ tco_res[1].end = tco_res[1].start + SMI_EN_SIZE - 1;
+
+ pmc->cells[PMC_TCO].resources = tco_res;
+ pmc->cells[PMC_TCO].num_resources = 2;
+
+ pdata = devm_kmemdup(&pdev->dev, &tco_pdata, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->no_reboot_priv = pmc;
+ pmc->cells[PMC_TCO].platform_data = pdata;
+ pmc->cells[PMC_TCO].pdata_size = sizeof(*pdata);
+
+ return 0;
+}
+
+static int intel_pmc_get_resources(struct platform_device *pdev,
+ struct intel_pmc_dev *pmc,
+ struct intel_scu_ipc_data *scu_data)
+{
+ struct resource *res, *punit_res;
+ struct resource gcr_res;
+ size_t npunit_res = 0;
+ int ret;
+
+ scu_data->irq = platform_get_irq_optional(pdev, 0);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM,
+ PLAT_RESOURCE_IPC_INDEX);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get IPC resource\n");
+ return -EINVAL;
+ }
+
+ /* IPC registers */
+ scu_data->mem.flags = res->flags;
+ scu_data->mem.start = res->start;
+ scu_data->mem.end = res->start + PLAT_RESOURCE_IPC_SIZE - 1;
+
+ /* GCR registers */
+ gcr_res.flags = res->flags;
+ gcr_res.start = res->start + PLAT_RESOURCE_GCR_OFFSET;
+ gcr_res.end = gcr_res.start + PLAT_RESOURCE_GCR_SIZE - 1;
+
+ pmc->gcr_mem_base = devm_ioremap_resource(&pdev->dev, &gcr_res);
+ if (IS_ERR(pmc->gcr_mem_base))
+ return PTR_ERR(pmc->gcr_mem_base);
+
+ pmc->cells[PMC_TCO] = tco;
+ pmc->cells[PMC_PUNIT] = punit;
+ pmc->cells[PMC_TELEM] = telem;
+
+ /* Only register iTCO watchdog if there is no WDAT ACPI table */
+ ret = intel_pmc_get_tco_resources(pdev, pmc);
+ if (ret)
+ return ret;
+
+ punit_res = devm_kcalloc(&pdev->dev, 6, sizeof(*punit_res), GFP_KERNEL);
+ if (!punit_res)
+ return -ENOMEM;
+
+ /* BIOS data register */
+ res = platform_get_resource(pdev, IORESOURCE_MEM,
+ PLAT_RESOURCE_BIOS_DATA_INDEX);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get resource of P-unit BIOS data\n");
+ return -EINVAL;
+ }
+ punit_res[npunit_res++] = *res;
+
+ /* BIOS interface register */
+ res = platform_get_resource(pdev, IORESOURCE_MEM,
+ PLAT_RESOURCE_BIOS_IFACE_INDEX);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get resource of P-unit BIOS interface\n");
+ return -EINVAL;
+ }
+ punit_res[npunit_res++] = *res;
+
+ /* ISP data register, optional */
+ res = platform_get_resource(pdev, IORESOURCE_MEM,
+ PLAT_RESOURCE_ISP_DATA_INDEX);
+ if (res)
+ punit_res[npunit_res++] = *res;
+
+ /* ISP interface register, optional */
+ res = platform_get_resource(pdev, IORESOURCE_MEM,
+ PLAT_RESOURCE_ISP_IFACE_INDEX);
+ if (res)
+ punit_res[npunit_res++] = *res;
+
+ /* GTD data register, optional */
+ res = platform_get_resource(pdev, IORESOURCE_MEM,
+ PLAT_RESOURCE_GTD_DATA_INDEX);
+ if (res)
+ punit_res[npunit_res++] = *res;
+
+ /* GTD interface register, optional */
+ res = platform_get_resource(pdev, IORESOURCE_MEM,
+ PLAT_RESOURCE_GTD_IFACE_INDEX);
+ if (res)
+ punit_res[npunit_res++] = *res;
+
+ pmc->cells[PMC_PUNIT].resources = punit_res;
+ pmc->cells[PMC_PUNIT].num_resources = npunit_res;
+
+ /* Telemetry SSRAM is optional */
+ res = platform_get_resource(pdev, IORESOURCE_MEM,
+ PLAT_RESOURCE_TELEM_SSRAM_INDEX);
+ if (res)
+ pmc->telem_base = res;
+
+ return 0;
+}
+
+static int intel_pmc_create_devices(struct intel_pmc_dev *pmc)
+{
+ int ret;
+
+ if (!acpi_has_watchdog()) {
+ ret = devm_mfd_add_devices(pmc->dev, PLATFORM_DEVID_AUTO,
+ &pmc->cells[PMC_TCO], 1, NULL, 0, NULL);
+ if (ret)
+ return ret;
+ }
+
+ ret = devm_mfd_add_devices(pmc->dev, PLATFORM_DEVID_AUTO,
+ &pmc->cells[PMC_PUNIT], 1, NULL, 0, NULL);
+ if (ret)
+ return ret;
+
+ if (pmc->telem_base) {
+ ret = devm_mfd_add_devices(pmc->dev, PLATFORM_DEVID_AUTO,
+ &pmc->cells[PMC_TELEM], 1,
+ pmc->telem_base, 0, NULL);
+ }
+
+ return ret;
+}
+
+static const struct acpi_device_id intel_pmc_acpi_ids[] = {
+ { "INT34D2" },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, intel_pmc_acpi_ids);
+
+static int intel_pmc_probe(struct platform_device *pdev)
+{
+ struct intel_scu_ipc_data scu_data = {};
+ struct intel_pmc_dev *pmc;
+ int ret;
+
+ pmc = devm_kzalloc(&pdev->dev, sizeof(*pmc), GFP_KERNEL);
+ if (!pmc)
+ return -ENOMEM;
+
+ pmc->dev = &pdev->dev;
+ spin_lock_init(&pmc->gcr_lock);
+
+ ret = intel_pmc_get_resources(pdev, pmc, &scu_data);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request resources\n");
+ return ret;
+ }
+
+ pmc->scu = devm_intel_scu_ipc_register(&pdev->dev, &scu_data);
+ if (IS_ERR(pmc->scu))
+ return PTR_ERR(pmc->scu);
+
+ platform_set_drvdata(pdev, pmc);
+
+ ret = intel_pmc_create_devices(pmc);
+ if (ret)
+ dev_err(&pdev->dev, "Failed to create PMC devices\n");
+
+ return ret;
+}
+
+static struct platform_driver intel_pmc_driver = {
+ .probe = intel_pmc_probe,
+ .driver = {
+ .name = "intel_pmc_bxt",
+ .acpi_match_table = intel_pmc_acpi_ids,
+ .dev_groups = intel_pmc_groups,
+ },
+};
+module_platform_driver(intel_pmc_driver);
+
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_AUTHOR("Zha Qipeng <qipeng.zha@intel.com>");
+MODULE_DESCRIPTION("Intel Broxton PMC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 13681f4ec2c5..d989d4030b75 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1261,7 +1261,8 @@ config INTEL_UNCORE_FREQ_CONTROL
config INTEL_BXTWC_PMIC_TMU
tristate "Intel BXT Whiskey Cove TMU Driver"
depends on REGMAP
- depends on INTEL_SOC_PMIC_BXTWC && INTEL_PMC_IPC
+ depends on MFD_INTEL_PMC_BXT
+ depends on INTEL_SOC_PMIC_BXTWC
---help---
Select this driver to use Intel BXT Whiskey Cove PMIC TMU feature.
This driver enables the alarm wakeup functionality in the TMU unit
@@ -1319,15 +1320,6 @@ config INTEL_PMC_CORE
- LTR Ignore
- MPHY/PLL gating status (Sunrisepoint PCH only)
-config INTEL_PMC_IPC
- tristate "Intel PMC IPC Driver"
- depends on ACPI
- select INTEL_SCU_IPC
- ---help---
- This driver provides support for PMC control on some Intel platforms.
- The PMC is an ARC processor which defines IPC commands for communication
- with other entities in the CPU.
-
config INTEL_PUNIT_IPC
tristate "Intel P-Unit IPC Driver"
---help---
@@ -1366,7 +1358,9 @@ config INTEL_SCU_IPC_UTIL
config INTEL_TELEMETRY
tristate "Intel SoC Telemetry Driver"
- depends on INTEL_PMC_IPC && INTEL_PUNIT_IPC && X86_64
+ depends on X86_64
+ depends on MFD_INTEL_PMC_BXT
+ depends on INTEL_PUNIT_IPC
---help---
This driver provides interfaces to configure and use
telemetry for INTEL SoC from APL onwards. It is also
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index a750bd8c1e81..193c77f71c33 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -137,7 +137,6 @@ obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o
obj-$(CONFIG_INTEL_MID_POWER_BUTTON) += intel_mid_powerbtn.o
obj-$(CONFIG_INTEL_MRFLD_PWRBTN) += intel_mrfld_pwrbtn.o
obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o intel_pmc_core_pltdrv.o
-obj-$(CONFIG_INTEL_PMC_IPC) += intel_pmc_ipc.o
obj-$(CONFIG_INTEL_PUNIT_IPC) += intel_punit_ipc.o
obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o
obj-$(CONFIG_INTEL_SCU_PCI) += intel_scu_pcidrv.o
diff --git a/drivers/platform/x86/intel_pmc_ipc.c b/drivers/platform/x86/intel_pmc_ipc.c
deleted file mode 100644
index c006609ef74b..000000000000
--- a/drivers/platform/x86/intel_pmc_ipc.c
+++ /dev/null
@@ -1,645 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Driver for the Intel PMC IPC mechanism
- *
- * (C) Copyright 2014-2015 Intel Corporation
- *
- * This driver is based on Intel SCU IPC driver(intel_scu_ipc.c) by
- * Sreedhara DS <sreedhara.ds@intel.com>
- *
- * PMC running in ARC processor communicates with other entity running in IA
- * core through IPC mechanism which in turn messaging between IA core ad PMC.
- */
-
-#include <linux/acpi.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/io-64-nonatomic-lo-hi.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/intel_pmc_ipc.h>
-#include <asm/intel_scu_ipc.h>
-
-#include <linux/platform_data/itco_wdt.h>
-
-/* Residency with clock rate at 19.2MHz to usecs */
-#define S0IX_RESIDENCY_IN_USECS(d, s) \
-({ \
- u64 result = 10ull * ((d) + (s)); \
- do_div(result, 192); \
- result; \
-})
-
-/* exported resources from IFWI */
-#define PLAT_RESOURCE_IPC_INDEX 0
-#define PLAT_RESOURCE_IPC_SIZE 0x1000
-#define PLAT_RESOURCE_GCR_OFFSET 0x1000
-#define PLAT_RESOURCE_GCR_SIZE 0x1000
-#define PLAT_RESOURCE_BIOS_DATA_INDEX 1
-#define PLAT_RESOURCE_BIOS_IFACE_INDEX 2
-#define PLAT_RESOURCE_TELEM_SSRAM_INDEX 3
-#define PLAT_RESOURCE_ISP_DATA_INDEX 4
-#define PLAT_RESOURCE_ISP_IFACE_INDEX 5
-#define PLAT_RESOURCE_GTD_DATA_INDEX 6
-#define PLAT_RESOURCE_GTD_IFACE_INDEX 7
-#define PLAT_RESOURCE_ACPI_IO_INDEX 0
-
-/*
- * BIOS does not create an ACPI device for each PMC function,
- * but exports multiple resources from one ACPI device(IPC) for
- * multiple functions. This driver is responsible to create a
- * platform device and to export resources for those functions.
- */
-#define TCO_DEVICE_NAME "iTCO_wdt"
-#define SMI_EN_OFFSET 0x40
-#define SMI_EN_SIZE 4
-#define TCO_BASE_OFFSET 0x60
-#define TCO_REGS_SIZE 16
-#define PUNIT_DEVICE_NAME "intel_punit_ipc"
-#define TELEMETRY_DEVICE_NAME "intel_telemetry"
-#define TELEM_SSRAM_SIZE 240
-#define TELEM_PMC_SSRAM_OFFSET 0x1B00
-#define TELEM_PUNIT_SSRAM_OFFSET 0x1A00
-#define TCO_PMC_OFFSET 0x08
-#define TCO_PMC_SIZE 0x04
-
-/* PMC register bit definitions */
-
-/* PMC_CFG_REG bit masks */
-#define PMC_CFG_NO_REBOOT_MASK BIT_MASK(4)
-#define PMC_CFG_NO_REBOOT_EN (1 << 4)
-#define PMC_CFG_NO_REBOOT_DIS (0 << 4)
-
-static struct intel_pmc_ipc_dev {
- struct device *dev;
-
- /* The following PMC BARs share the same ACPI device with the IPC */
- resource_size_t acpi_io_base;
- int acpi_io_size;
- struct platform_device *tco_dev;
-
- /* gcr */
- void __iomem *gcr_mem_base;
- bool has_gcr_regs;
- spinlock_t gcr_lock;
-
- /* punit */
- struct platform_device *punit_dev;
- unsigned int punit_res_count;
-
- /* Telemetry */
- resource_size_t telem_pmc_ssram_base;
- resource_size_t telem_punit_ssram_base;
- int telem_pmc_ssram_size;
- int telem_punit_ssram_size;
- u8 telem_res_inval;
- struct platform_device *telemetry_dev;
-} ipcdev;
-
-static inline u64 gcr_data_readq(u32 offset)
-{
- return readq(ipcdev.gcr_mem_base + offset);
-}
-
-static inline int is_gcr_valid(u32 offset)
-{
- if (!ipcdev.has_gcr_regs)
- return -EACCES;
-
- if (offset > PLAT_RESOURCE_GCR_SIZE)
- return -EINVAL;
-
- return 0;
-}
-
-/**
- * intel_pmc_gcr_read64() - Read a 64-bit PMC GCR register
- * @offset: offset of GCR register from GCR address base
- * @data: data pointer for storing the register output
- *
- * Reads the 64-bit PMC GCR register at given offset.
- *
- * Return: negative value on error or 0 on success.
- */
-int intel_pmc_gcr_read64(u32 offset, u64 *data)
-{
- int ret;
-
- spin_lock(&ipcdev.gcr_lock);
-
- ret = is_gcr_valid(offset);
- if (ret < 0) {
- spin_unlock(&ipcdev.gcr_lock);
- return ret;
- }
-
- *data = readq(ipcdev.gcr_mem_base + offset);
-
- spin_unlock(&ipcdev.gcr_lock);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(intel_pmc_gcr_read64);
-
-/**
- * intel_pmc_gcr_update() - Update PMC GCR register bits
- * @offset: offset of GCR register from GCR address base
- * @mask: bit mask for update operation
- * @val: update value
- *
- * Updates the bits of given GCR register as specified by
- * @mask and @val.
- *
- * Return: negative value on error or 0 on success.
- */
-static int intel_pmc_gcr_update(u32 offset, u32 mask, u32 val)
-{
- u32 new_val;
- int ret = 0;
-
- spin_lock(&ipcdev.gcr_lock);
-
- ret = is_gcr_valid(offset);
- if (ret < 0)
- goto gcr_ipc_unlock;
-
- new_val = readl(ipcdev.gcr_mem_base + offset);
-
- new_val &= ~mask;
- new_val |= val & mask;
-
- writel(new_val, ipcdev.gcr_mem_base + offset);
-
- new_val = readl(ipcdev.gcr_mem_base + offset);
-
- /* check whether the bit update is successful */
- if ((new_val & mask) != (val & mask)) {
- ret = -EIO;
- goto gcr_ipc_unlock;
- }
-
-gcr_ipc_unlock:
- spin_unlock(&ipcdev.gcr_lock);
- return ret;
-}
-
-static int update_no_reboot_bit(void *priv, bool set)
-{
- u32 value = set ? PMC_CFG_NO_REBOOT_EN : PMC_CFG_NO_REBOOT_DIS;
-
- return intel_pmc_gcr_update(PMC_GCR_PMC_CFG_REG,
- PMC_CFG_NO_REBOOT_MASK, value);
-}
-
-static ssize_t intel_pmc_ipc_simple_cmd_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct intel_scu_ipc_dev *scu = dev_get_drvdata(dev);
- int subcmd;
- int cmd;
- int ret;
-
- ret = sscanf(buf, "%d %d", &cmd, &subcmd);
- if (ret != 2) {
- dev_err(dev, "Error args\n");
- return -EINVAL;
- }
-
- ret = intel_scu_ipc_dev_simple_command(scu, cmd, subcmd);
- if (ret) {
- dev_err(dev, "command %d error with %d\n", cmd, ret);
- return ret;
- }
- return (ssize_t)count;
-}
-static DEVICE_ATTR(simplecmd, 0200, NULL, intel_pmc_ipc_simple_cmd_store);
-
-static ssize_t intel_pmc_ipc_northpeak_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct intel_scu_ipc_dev *scu = dev_get_drvdata(dev);
- unsigned long val;
- int subcmd;
- int ret;
-
- ret = kstrtoul(buf, 0, &val);
- if (ret)
- return ret;
-
- if (val)
- subcmd = 1;
- else
- subcmd = 0;
- ret = intel_scu_ipc_dev_simple_command(scu, PMC_IPC_NORTHPEAK_CTRL, subcmd);
- if (ret) {
- dev_err(dev, "command north %d error with %d\n", subcmd, ret);
- return ret;
- }
- return (ssize_t)count;
-}
-static DEVICE_ATTR(northpeak, 0200, NULL, intel_pmc_ipc_northpeak_store);
-
-static struct attribute *intel_ipc_attrs[] = {
- &dev_attr_northpeak.attr,
- &dev_attr_simplecmd.attr,
- NULL
-};
-
-static const struct attribute_group intel_ipc_group = {
- .attrs = intel_ipc_attrs,
-};
-
-static const struct attribute_group *intel_ipc_groups[] = {
- &intel_ipc_group,
- NULL
-};
-
-static struct resource punit_res_array[] = {
- /* Punit BIOS */
- {
- .flags = IORESOURCE_MEM,
- },
- {
- .flags = IORESOURCE_MEM,
- },
- /* Punit ISP */
- {
- .flags = IORESOURCE_MEM,
- },
- {
- .flags = IORESOURCE_MEM,
- },
- /* Punit GTD */
- {
- .flags = IORESOURCE_MEM,
- },
- {
- .flags = IORESOURCE_MEM,
- },
-};
-
-#define TCO_RESOURCE_ACPI_IO 0
-#define TCO_RESOURCE_SMI_EN_IO 1
-#define TCO_RESOURCE_GCR_MEM 2
-static struct resource tco_res[] = {
- /* ACPI - TCO */
- {
- .flags = IORESOURCE_IO,
- },
- /* ACPI - SMI */
- {
- .flags = IORESOURCE_IO,
- },
-};
-
-static struct itco_wdt_platform_data tco_info = {
- .name = "Apollo Lake SoC",
- .version = 5,
- .no_reboot_priv = &ipcdev,
- .update_no_reboot_bit = update_no_reboot_bit,
-};
-
-#define TELEMETRY_RESOURCE_PUNIT_SSRAM 0
-#define TELEMETRY_RESOURCE_PMC_SSRAM 1
-static struct resource telemetry_res[] = {
- /*Telemetry*/
- {
- .flags = IORESOURCE_MEM,
- },
- {
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int ipc_create_punit_device(void)
-{
- struct platform_device *pdev;
- const struct platform_device_info pdevinfo = {
- .parent = ipcdev.dev,
- .name = PUNIT_DEVICE_NAME,
- .id = -1,
- .res = punit_res_array,
- .num_res = ipcdev.punit_res_count,
- };
-
- pdev = platform_device_register_full(&pdevinfo);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- ipcdev.punit_dev = pdev;
-
- return 0;
-}
-
-static int ipc_create_tco_device(void)
-{
- struct platform_device *pdev;
- struct resource *res;
- const struct platform_device_info pdevinfo = {
- .parent = ipcdev.dev,
- .name = TCO_DEVICE_NAME,
- .id = -1,
- .res = tco_res,
- .num_res = ARRAY_SIZE(tco_res),
- .data = &tco_info,
- .size_data = sizeof(tco_info),
- };
-
- res = tco_res + TCO_RESOURCE_ACPI_IO;
- res->start = ipcdev.acpi_io_base + TCO_BASE_OFFSET;
- res->end = res->start + TCO_REGS_SIZE - 1;
-
- res = tco_res + TCO_RESOURCE_SMI_EN_IO;
- res->start = ipcdev.acpi_io_base + SMI_EN_OFFSET;
- res->end = res->start + SMI_EN_SIZE - 1;
-
- pdev = platform_device_register_full(&pdevinfo);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- ipcdev.tco_dev = pdev;
-
- return 0;
-}
-
-static int ipc_create_telemetry_device(void)
-{
- struct platform_device *pdev;
- struct resource *res;
- const struct platform_device_info pdevinfo = {
- .parent = ipcdev.dev,
- .name = TELEMETRY_DEVICE_NAME,
- .id = -1,
- .res = telemetry_res,
- .num_res = ARRAY_SIZE(telemetry_res),
- };
-
- res = telemetry_res + TELEMETRY_RESOURCE_PUNIT_SSRAM;
- res->start = ipcdev.telem_punit_ssram_base;
- res->end = res->start + ipcdev.telem_punit_ssram_size - 1;
-
- res = telemetry_res + TELEMETRY_RESOURCE_PMC_SSRAM;
- res->start = ipcdev.telem_pmc_ssram_base;
- res->end = res->start + ipcdev.telem_pmc_ssram_size - 1;
-
- pdev = platform_device_register_full(&pdevinfo);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- ipcdev.telemetry_dev = pdev;
-
- return 0;
-}
-
-static int ipc_create_pmc_devices(void)
-{
- int ret;
-
- /* If we have ACPI based watchdog use that instead */
- if (!acpi_has_watchdog()) {
- ret = ipc_create_tco_device();
- if (ret) {
- dev_err(ipcdev.dev, "Failed to add tco platform device\n");
- return ret;
- }
- }
-
- ret = ipc_create_punit_device();
- if (ret) {
- dev_err(ipcdev.dev, "Failed to add punit platform device\n");
- platform_device_unregister(ipcdev.tco_dev);
- return ret;
- }
-
- if (!ipcdev.telem_res_inval) {
- ret = ipc_create_telemetry_device();
- if (ret) {
- dev_warn(ipcdev.dev,
- "Failed to add telemetry platform device\n");
- platform_device_unregister(ipcdev.punit_dev);
- platform_device_unregister(ipcdev.tco_dev);
- }
- }
-
- return ret;
-}
-
-static int ipc_plat_get_res(struct platform_device *pdev,
- struct intel_scu_ipc_pdata *pdata)
-{
- struct resource *res, *punit_res = punit_res_array;
- resource_size_t start;
- void __iomem *addr;
- int size;
-
- res = platform_get_resource(pdev, IORESOURCE_IO,
- PLAT_RESOURCE_ACPI_IO_INDEX);
- if (!res) {
- dev_err(&pdev->dev, "Failed to get io resource\n");
- return -ENXIO;
- }
- size = resource_size(res);
- ipcdev.acpi_io_base = res->start;
- ipcdev.acpi_io_size = size;
- dev_info(&pdev->dev, "io res: %pR\n", res);
-
- ipcdev.punit_res_count = 0;
-
- /* This is index 0 to cover BIOS data register */
- res = platform_get_resource(pdev, IORESOURCE_MEM,
- PLAT_RESOURCE_BIOS_DATA_INDEX);
- if (!res) {
- dev_err(&pdev->dev, "Failed to get res of punit BIOS data\n");
- return -ENXIO;
- }
- punit_res[ipcdev.punit_res_count++] = *res;
- dev_info(&pdev->dev, "punit BIOS data res: %pR\n", res);
-
- /* This is index 1 to cover BIOS interface register */
- res = platform_get_resource(pdev, IORESOURCE_MEM,
- PLAT_RESOURCE_BIOS_IFACE_INDEX);
- if (!res) {
- dev_err(&pdev->dev, "Failed to get res of punit BIOS iface\n");
- return -ENXIO;
- }
- punit_res[ipcdev.punit_res_count++] = *res;
- dev_info(&pdev->dev, "punit BIOS interface res: %pR\n", res);
-
- /* This is index 2 to cover ISP data register, optional */
- res = platform_get_resource(pdev, IORESOURCE_MEM,
- PLAT_RESOURCE_ISP_DATA_INDEX);
- if (res) {
- punit_res[ipcdev.punit_res_count++] = *res;
- dev_info(&pdev->dev, "punit ISP data res: %pR\n", res);
- }
-
- /* This is index 3 to cover ISP interface register, optional */
- res = platform_get_resource(pdev, IORESOURCE_MEM,
- PLAT_RESOURCE_ISP_IFACE_INDEX);
- if (res) {
- punit_res[ipcdev.punit_res_count++] = *res;
- dev_info(&pdev->dev, "punit ISP interface res: %pR\n", res);
- }
-
- /* This is index 4 to cover GTD data register, optional */
- res = platform_get_resource(pdev, IORESOURCE_MEM,
- PLAT_RESOURCE_GTD_DATA_INDEX);
- if (res) {
- punit_res[ipcdev.punit_res_count++] = *res;
- dev_info(&pdev->dev, "punit GTD data res: %pR\n", res);
- }
-
- /* This is index 5 to cover GTD interface register, optional */
- res = platform_get_resource(pdev, IORESOURCE_MEM,
- PLAT_RESOURCE_GTD_IFACE_INDEX);
- if (res) {
- punit_res[ipcdev.punit_res_count++] = *res;
- dev_info(&pdev->dev, "punit GTD interface res: %pR\n", res);
- }
-
- pdata->irq = platform_get_irq(pdev, 0);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM,
- PLAT_RESOURCE_IPC_INDEX);
- if (!res) {
- dev_err(&pdev->dev, "Failed to get ipc resource\n");
- return -ENXIO;
- }
- dev_info(&pdev->dev, "ipc res: %pR\n", res);
-
- pdata->mem.flags = res->flags;
- pdata->mem.start = res->start;
- pdata->mem.end = res->start + PLAT_RESOURCE_IPC_SIZE - 1;
-
- start = res->start + PLAT_RESOURCE_GCR_OFFSET;
- if (!devm_request_mem_region(&pdev->dev, start, PLAT_RESOURCE_GCR_SIZE,
- "pmc_ipc_plat"))
- return -EBUSY;
-
- addr = devm_ioremap(&pdev->dev, start, PLAT_RESOURCE_GCR_SIZE);
- if (!addr)
- return -ENOMEM;
-
- ipcdev.gcr_mem_base = addr;
-
- ipcdev.telem_res_inval = 0;
- res = platform_get_resource(pdev, IORESOURCE_MEM,
- PLAT_RESOURCE_TELEM_SSRAM_INDEX);
- if (!res) {
- dev_err(&pdev->dev, "Failed to get telemetry ssram resource\n");
- ipcdev.telem_res_inval = 1;
- } else {
- ipcdev.telem_punit_ssram_base = res->start +
- TELEM_PUNIT_SSRAM_OFFSET;
- ipcdev.telem_punit_ssram_size = TELEM_SSRAM_SIZE;
- ipcdev.telem_pmc_ssram_base = res->start +
- TELEM_PMC_SSRAM_OFFSET;
- ipcdev.telem_pmc_ssram_size = TELEM_SSRAM_SIZE;
- dev_info(&pdev->dev, "telemetry ssram res: %pR\n", res);
- }
-
- return 0;
-}
-
-/**
- * intel_pmc_s0ix_counter_read() - Read S0ix residency.
- * @data: Out param that contains current S0ix residency count.
- *
- * Return: an error code or 0 on success.
- */
-int intel_pmc_s0ix_counter_read(u64 *data)
-{
- u64 deep, shlw;
-
- if (!ipcdev.has_gcr_regs)
- return -EACCES;
-
- deep = gcr_data_readq(PMC_GCR_TELEM_DEEP_S0IX_REG);
- shlw = gcr_data_readq(PMC_GCR_TELEM_SHLW_S0IX_REG);
-
- *data = S0IX_RESIDENCY_IN_USECS(deep, shlw);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(intel_pmc_s0ix_counter_read);
-
-#ifdef CONFIG_ACPI
-static const struct acpi_device_id ipc_acpi_ids[] = {
- { "INT34D2", 0},
- { }
-};
-MODULE_DEVICE_TABLE(acpi, ipc_acpi_ids);
-#endif
-
-static int ipc_plat_probe(struct platform_device *pdev)
-{
- struct intel_scu_ipc_pdata pdata = {};
- struct intel_scu_ipc_dev *scu;
- int ret;
-
- ipcdev.dev = &pdev->dev;
- spin_lock_init(&ipcdev.gcr_lock);
-
- ret = ipc_plat_get_res(pdev, &pdata);
- if (ret) {
- dev_err(&pdev->dev, "Failed to request resource\n");
- return ret;
- }
-
- scu = devm_intel_scu_ipc_register(&pdev->dev, &pdata);
- if (IS_ERR(scu))
- return PTR_ERR(scu);
-
- platform_set_drvdata(pdev, scu);
-
- ret = ipc_create_pmc_devices();
- if (ret) {
- dev_err(&pdev->dev, "Failed to create pmc devices\n");
- return ret;
- }
-
- ipcdev.has_gcr_regs = true;
-
- return 0;
-}
-
-static int ipc_plat_remove(struct platform_device *pdev)
-{
- platform_device_unregister(ipcdev.tco_dev);
- platform_device_unregister(ipcdev.punit_dev);
- platform_device_unregister(ipcdev.telemetry_dev);
- ipcdev.dev = NULL;
- return 0;
-}
-
-static struct platform_driver ipc_plat_driver = {
- .remove = ipc_plat_remove,
- .probe = ipc_plat_probe,
- .driver = {
- .name = "pmc-ipc-plat",
- .acpi_match_table = ACPI_PTR(ipc_acpi_ids),
- .dev_groups = intel_ipc_groups,
- },
-};
-
-static int __init intel_pmc_ipc_init(void)
-{
- return platform_driver_register(&ipc_plat_driver);
-}
-
-static void __exit intel_pmc_ipc_exit(void)
-{
- platform_driver_unregister(&ipc_plat_driver);
-}
-
-MODULE_AUTHOR("Zha Qipeng <qipeng.zha@intel.com>");
-MODULE_DESCRIPTION("Intel PMC IPC driver");
-MODULE_LICENSE("GPL v2");
-
-/* Some modules are dependent on this, so init earlier */
-fs_initcall(intel_pmc_ipc_init);
-module_exit(intel_pmc_ipc_exit);
diff --git a/drivers/platform/x86/intel_telemetry_debugfs.c b/drivers/platform/x86/intel_telemetry_debugfs.c
index 85a456aa0ab9..3a533fa22760 100644
--- a/drivers/platform/x86/intel_telemetry_debugfs.c
+++ b/drivers/platform/x86/intel_telemetry_debugfs.c
@@ -15,6 +15,7 @@
*/
#include <linux/debugfs.h>
#include <linux/device.h>
+#include <linux/mfd/intel_pmc_bxt.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/seq_file.h>
@@ -22,7 +23,6 @@
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
-#include <asm/intel_pmc_ipc.h>
#include <asm/intel_telemetry.h>
#define DRIVER_NAME "telemetry_soc_debugfs"
@@ -648,10 +648,11 @@ DEFINE_SHOW_ATTRIBUTE(telem_soc_states);
static int telem_s0ix_res_get(void *data, u64 *val)
{
+ struct telemetry_plt_config *plt_config = telemetry_get_pltdata();
u64 s0ix_total_res;
int ret;
- ret = intel_pmc_s0ix_counter_read(&s0ix_total_res);
+ ret = intel_pmc_s0ix_counter_read(plt_config->pmc, &s0ix_total_res);
if (ret) {
pr_err("Failed to read S0ix residency");
return ret;
@@ -838,12 +839,15 @@ static int pm_suspend_exit_cb(void)
*/
if (suspend_shlw_ctr_exit == suspend_shlw_ctr_temp &&
suspend_deep_ctr_exit == suspend_deep_ctr_temp) {
- ret = intel_pmc_gcr_read64(PMC_GCR_TELEM_SHLW_S0IX_REG,
+ struct telemetry_plt_config *plt_config = telemetry_get_pltdata();
+ struct intel_pmc_dev *pmc = plt_config->pmc;
+
+ ret = intel_pmc_gcr_read64(pmc, PMC_GCR_TELEM_SHLW_S0IX_REG,
&suspend_shlw_res_exit);
if (ret < 0)
goto out;
- ret = intel_pmc_gcr_read64(PMC_GCR_TELEM_DEEP_S0IX_REG,
+ ret = intel_pmc_gcr_read64(pmc, PMC_GCR_TELEM_DEEP_S0IX_REG,
&suspend_deep_res_exit);
if (ret < 0)
goto out;
diff --git a/drivers/platform/x86/intel_telemetry_pltdrv.c b/drivers/platform/x86/intel_telemetry_pltdrv.c
index efcf214d25b1..d2aee90fb0c5 100644
--- a/drivers/platform/x86/intel_telemetry_pltdrv.c
+++ b/drivers/platform/x86/intel_telemetry_pltdrv.c
@@ -1118,6 +1118,8 @@ static int telemetry_pltdrv_probe(struct platform_device *pdev)
telm_conf = (struct telemetry_plt_config *)id->driver_data;
+ telm_conf->pmc = dev_get_drvdata(pdev->dev.parent);
+
mem = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(mem))
return PTR_ERR(mem);
diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
index 5b986d6c801d..fa3f39336246 100644
--- a/drivers/usb/typec/tcpm/Kconfig
+++ b/drivers/usb/typec/tcpm/Kconfig
@@ -41,8 +41,8 @@ config TYPEC_FUSB302
config TYPEC_WCOVE
tristate "Intel WhiskeyCove PMIC USB Type-C PHY driver"
depends on ACPI
+ depends on MFD_INTEL_PMC_BXT
depends on INTEL_SOC_PMIC
- depends on INTEL_PMC_IPC
depends on BXT_WC_PMIC_OPREGION
help
This driver adds support for USB Type-C on Intel Broxton platforms
diff --git a/include/linux/mfd/intel_pmc_bxt.h b/include/linux/mfd/intel_pmc_bxt.h
new file mode 100644
index 000000000000..0e2efa9dcf02
--- /dev/null
+++ b/include/linux/mfd/intel_pmc_bxt.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef MFD_INTEL_PMC_BXT_H
+#define MFD_INTEL_PMC_BXT_H
+
+#include <linux/mfd/core.h>
+
+/* GCR reg offsets from GCR base */
+#define PMC_GCR_PMC_CFG_REG 0x08
+#define PMC_GCR_TELEM_DEEP_S0IX_REG 0x78
+#define PMC_GCR_TELEM_SHLW_S0IX_REG 0x80
+
+/* Index to cells array in struct intel_pmc_dev */
+enum {
+ PMC_TCO,
+ PMC_PUNIT,
+ PMC_TELEM,
+ PMC_DEVICE_MAX
+};
+
+/**
+ * struct intel_pmc_dev - Intel PMC device structure
+ * @dev: Pointer to the parent PMC device
+ * @scu: Pointer to the SCU IPC device data structure
+ * @cells: Cells that get populated from the templates and resources. These
+ * will be passed to the MFD core.
+ * @gcr_mem_base: Virtual base address of GCR (Global Configuration Registers)
+ * @gcr_lock: Lock used to serialize access to GCR registers
+ * @telem_base: Pointer to telemetry SSRAM base resource or %NULL if not
+ * available
+ */
+struct intel_pmc_dev {
+ struct device *dev;
+ struct intel_scu_ipc_dev *scu;
+ struct mfd_cell cells[PMC_DEVICE_MAX];
+ void __iomem *gcr_mem_base;
+ spinlock_t gcr_lock;
+ struct resource *telem_base;
+};
+
+int intel_pmc_s0ix_counter_read(struct intel_pmc_dev *pmc, u64 *data);
+int intel_pmc_gcr_read64(struct intel_pmc_dev *pmc, u32 offset, u64 *data);
+
+#endif /* MFD_INTEL_PMC_BXT_H */
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* Re: [PATCH v8 18/19] platform/x86: intel_pmc_ipc: Convert to MFD
2020-03-03 13:36 ` [PATCH v8 18/19] platform/x86: intel_pmc_ipc: Convert to MFD Mika Westerberg
@ 2020-03-24 10:26 ` Andy Shevchenko
2020-03-24 11:27 ` Lee Jones
2020-03-24 11:52 ` Lee Jones
1 sibling, 1 reply; 28+ messages in thread
From: Andy Shevchenko @ 2020-03-24 10:26 UTC (permalink / raw)
To: Mika Westerberg
Cc: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman,
Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT), Zha Qipeng,
David E . Box, Guenter Roeck, Heikki Krogerus, Wim Van Sebroeck,
Platform Driver, Linux Kernel Mailing List
On Tue, Mar 3, 2020 at 3:43 PM Mika Westerberg
<mika.westerberg@linux.intel.com> wrote:
>
> This driver only creates a bunch of platform devices sharing resources
> belonging to the PMC device. This is pretty much what MFD subsystem is
> for so move the driver there, renaming it to intel_pmc_bxt.c which
> should be more clear what it is.
>
> MFD subsystem provides nice helper APIs for subdevice creation so
> convert the driver to use those. Unfortunately the ACPI device includes
> separate resources for most of the subdevices so we cannot simply call
> mfd_add_devices() to create all of them but instead we need to call it
> separately for each device.
>
> The new MFD driver continues to expose two sysfs attributes that allow
> userspace to send IPC commands to the PMC/SCU to avoid breaking any
> existing applications that may use these. Generally this is bad idea so
> document this in the ABI documentation.
>
Lee, are you fine with this?
I can push it all via my tree and prepare IB for you.
> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> .../ABI/obsolete/sysfs-driver-intel_pmc_bxt | 22 +
> arch/x86/include/asm/intel_pmc_ipc.h | 47 --
> arch/x86/include/asm/intel_telemetry.h | 1 +
> drivers/mfd/Kconfig | 16 +-
> drivers/mfd/Makefile | 1 +
> drivers/mfd/intel_pmc_bxt.c | 504 ++++++++++++++
> drivers/platform/x86/Kconfig | 16 +-
> drivers/platform/x86/Makefile | 1 -
> drivers/platform/x86/intel_pmc_ipc.c | 645 ------------------
> .../platform/x86/intel_telemetry_debugfs.c | 12 +-
> drivers/platform/x86/intel_telemetry_pltdrv.c | 2 +
> drivers/usb/typec/tcpm/Kconfig | 2 +-
> include/linux/mfd/intel_pmc_bxt.h | 43 ++
> 13 files changed, 602 insertions(+), 710 deletions(-)
> create mode 100644 Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
> delete mode 100644 arch/x86/include/asm/intel_pmc_ipc.h
> create mode 100644 drivers/mfd/intel_pmc_bxt.c
> delete mode 100644 drivers/platform/x86/intel_pmc_ipc.c
> create mode 100644 include/linux/mfd/intel_pmc_bxt.h
>
> diff --git a/Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt b/Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
> new file mode 100644
> index 000000000000..39d5659f388b
> --- /dev/null
> +++ b/Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
> @@ -0,0 +1,22 @@
> +These files allow sending arbitrary IPC commands to the PMC/SCU which
> +may be dangerous. These will be removed eventually and should not be
> +used in any new applications.
> +
> +What: /sys/bus/platform/devices/INT34D2:00/simplecmd
> +Date: Jun 2015
> +KernelVersion: 4.1
> +Contact: Mika Westerberg <mika.westerberg@linux.intel.com>
> +Description: This interface allows userspace to send an arbitrary
> + IPC command to the PMC/SCU.
> +
> + Format: %d %d where first number is command and
> + second number is subcommand.
> +
> +What: /sys/bus/platform/devices/INT34D2:00/northpeak
> +Date: Jun 2015
> +KernelVersion: 4.1
> +Contact: Mika Westerberg <mika.westerberg@linux.intel.com>
> +Description: This interface allows userspace to enable and disable
> + Northpeak through the PMC/SCU.
> +
> + Format: %u.
> diff --git a/arch/x86/include/asm/intel_pmc_ipc.h b/arch/x86/include/asm/intel_pmc_ipc.h
> deleted file mode 100644
> index 22848df5faaf..000000000000
> --- a/arch/x86/include/asm/intel_pmc_ipc.h
> +++ /dev/null
> @@ -1,47 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -#ifndef _ASM_X86_INTEL_PMC_IPC_H_
> -#define _ASM_X86_INTEL_PMC_IPC_H_
> -
> -/* Commands */
> -#define PMC_IPC_USB_PWR_CTRL 0xF0
> -#define PMC_IPC_PMIC_BLACKLIST_SEL 0xEF
> -#define PMC_IPC_PHY_CONFIG 0xEE
> -#define PMC_IPC_NORTHPEAK_CTRL 0xED
> -#define PMC_IPC_PM_DEBUG 0xEC
> -#define PMC_IPC_PMC_FW_MSG_CTRL 0xEA
> -
> -/* IPC return code */
> -#define IPC_ERR_NONE 0
> -#define IPC_ERR_CMD_NOT_SUPPORTED 1
> -#define IPC_ERR_CMD_NOT_SERVICED 2
> -#define IPC_ERR_UNABLE_TO_SERVICE 3
> -#define IPC_ERR_CMD_INVALID 4
> -#define IPC_ERR_CMD_FAILED 5
> -#define IPC_ERR_EMSECURITY 6
> -#define IPC_ERR_UNSIGNEDKERNEL 7
> -
> -/* GCR reg offsets from gcr base*/
> -#define PMC_GCR_PMC_CFG_REG 0x08
> -#define PMC_GCR_TELEM_DEEP_S0IX_REG 0x78
> -#define PMC_GCR_TELEM_SHLW_S0IX_REG 0x80
> -
> -#if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
> -
> -int intel_pmc_s0ix_counter_read(u64 *data);
> -int intel_pmc_gcr_read64(u32 offset, u64 *data);
> -
> -#else
> -
> -static inline int intel_pmc_s0ix_counter_read(u64 *data)
> -{
> - return -EINVAL;
> -}
> -
> -static inline int intel_pmc_gcr_read64(u32 offset, u64 *data)
> -{
> - return -EINVAL;
> -}
> -
> -#endif /*CONFIG_INTEL_PMC_IPC*/
> -
> -#endif
> diff --git a/arch/x86/include/asm/intel_telemetry.h b/arch/x86/include/asm/intel_telemetry.h
> index 2c0e7d7a10e9..8046e70dfd7c 100644
> --- a/arch/x86/include/asm/intel_telemetry.h
> +++ b/arch/x86/include/asm/intel_telemetry.h
> @@ -53,6 +53,7 @@ struct telemetry_plt_config {
> struct telemetry_unit_config ioss_config;
> struct mutex telem_trace_lock;
> struct mutex telem_lock;
> + struct intel_pmc_dev *pmc;
> struct intel_scu_ipc_dev *scu;
> bool telem_in_use;
> };
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 20b294ef2873..d41a965d819b 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -551,7 +551,7 @@ config INTEL_SOC_PMIC
>
> config INTEL_SOC_PMIC_BXTWC
> tristate "Support for Intel Broxton Whiskey Cove PMIC"
> - depends on INTEL_PMC_IPC
> + depends on MFD_INTEL_PMC_BXT
> select MFD_CORE
> select REGMAP_IRQ
> help
> @@ -632,6 +632,20 @@ config MFD_INTEL_MSIC
> Passage) chip. This chip embeds audio, battery, GPIO, etc.
> devices used in Intel Medfield platforms.
>
> +config MFD_INTEL_PMC_BXT
> + tristate "Intel PMC Driver for Broxton"
> + depends on X86
> + depends on X86_PLATFORM_DEVICES
> + depends on ACPI
> + select INTEL_SCU_IPC
> + select MFD_CORE
> + help
> + This driver provides support for the PMC (Power Management
> + Controller) on Intel Broxton and Apollo Lake. The PMC is a
> + multi-function device that exposes IPC, General Control
> + Register and P-unit access. In addition this creates devices
> + for iTCO watchdog and telemetry that are part of the PMC.
> +
> config MFD_IPAQ_MICRO
> bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
> depends on SA1100_H3100 || SA1100_H3600
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index b83f172545e1..444264d42a20 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -212,6 +212,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
> obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
> obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
> obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
> +obj-$(CONFIG_MFD_INTEL_PMC_BXT) += intel_pmc_bxt.o
> obj-$(CONFIG_MFD_PALMAS) += palmas.o
> obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
> obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
> diff --git a/drivers/mfd/intel_pmc_bxt.c b/drivers/mfd/intel_pmc_bxt.c
> new file mode 100644
> index 000000000000..626104476600
> --- /dev/null
> +++ b/drivers/mfd/intel_pmc_bxt.c
> @@ -0,0 +1,504 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for the Intel Broxton PMC
> + *
> + * (C) Copyright 2014 - 2020 Intel Corporation
> + *
> + * This driver is based on Intel SCU IPC driver (intel_scu_ipc.c) by
> + * Sreedhara DS <sreedhara.ds@intel.com>
> + *
> + * The PMC (Power Management Controller) running on the ARC processor
> + * communicates with another entity running in the IA (Intel Architecture)
> + * core through an IPC (Intel Processor Communications) mechanism which in
> + * turn sends messages between the IA and the PMC.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/delay.h>
> +#include <linux/errno.h>
> +#include <linux/interrupt.h>
> +#include <linux/io-64-nonatomic-lo-hi.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/intel_pmc_bxt.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/platform_data/itco_wdt.h>
> +
> +#include <asm/intel_scu_ipc.h>
> +
> +/* Residency with clock rate at 19.2MHz to usecs */
> +#define S0IX_RESIDENCY_IN_USECS(d, s) \
> +({ \
> + u64 result = 10ull * ((d) + (s)); \
> + do_div(result, 192); \
> + result; \
> +})
> +
> +/* Resources exported from IFWI */
> +#define PLAT_RESOURCE_IPC_INDEX 0
> +#define PLAT_RESOURCE_IPC_SIZE 0x1000
> +#define PLAT_RESOURCE_GCR_OFFSET 0x1000
> +#define PLAT_RESOURCE_GCR_SIZE 0x1000
> +#define PLAT_RESOURCE_BIOS_DATA_INDEX 1
> +#define PLAT_RESOURCE_BIOS_IFACE_INDEX 2
> +#define PLAT_RESOURCE_TELEM_SSRAM_INDEX 3
> +#define PLAT_RESOURCE_ISP_DATA_INDEX 4
> +#define PLAT_RESOURCE_ISP_IFACE_INDEX 5
> +#define PLAT_RESOURCE_GTD_DATA_INDEX 6
> +#define PLAT_RESOURCE_GTD_IFACE_INDEX 7
> +#define PLAT_RESOURCE_ACPI_IO_INDEX 0
> +
> +/*
> + * BIOS does not create an ACPI device for each PMC function, but
> + * exports multiple resources from one ACPI device (IPC) for multiple
> + * functions. This driver is responsible for creating a child device and
> + * to export resources for those functions.
> + */
> +#define SMI_EN_OFFSET 0x0040
> +#define SMI_EN_SIZE 4
> +#define TCO_BASE_OFFSET 0x0060
> +#define TCO_REGS_SIZE 16
> +#define TELEM_SSRAM_SIZE 240
> +#define TELEM_PMC_SSRAM_OFFSET 0x1B00
> +#define TELEM_PUNIT_SSRAM_OFFSET 0x1A00
> +
> +/* Commands */
> +#define PMC_NORTHPEAK_CTRL 0xED
> +
> +/* PMC_CFG_REG bit masks */
> +#define PMC_CFG_NO_REBOOT_EN BIT(4)
> +
> +static inline bool is_gcr_valid(u32 offset)
> +{
> + return offset < PLAT_RESOURCE_GCR_SIZE - 8;
> +}
> +
> +/**
> + * intel_pmc_gcr_read64() - Read a 64-bit PMC GCR register
> + * @pmc: PMC device pointer
> + * @offset: offset of GCR register from GCR address base
> + * @data: data pointer for storing the register output
> + *
> + * Reads the 64-bit PMC GCR register at given offset.
> + *
> + * Return: Negative value on error or 0 on success.
> + */
> +int intel_pmc_gcr_read64(struct intel_pmc_dev *pmc, u32 offset, u64 *data)
> +{
> + if (!is_gcr_valid(offset))
> + return -EINVAL;
> +
> + spin_lock(&pmc->gcr_lock);
> + *data = readq(pmc->gcr_mem_base + offset);
> + spin_unlock(&pmc->gcr_lock);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(intel_pmc_gcr_read64);
> +
> +/**
> + * intel_pmc_gcr_update() - Update PMC GCR register bits
> + * @pmc: PMC device pointer
> + * @offset: offset of GCR register from GCR address base
> + * @mask: bit mask for update operation
> + * @val: update value
> + *
> + * Updates the bits of given GCR register as specified by
> + * @mask and @val.
> + *
> + * Return: Negative value on error or 0 on success.
> + */
> +static int intel_pmc_gcr_update(struct intel_pmc_dev *pmc, u32 offset, u32 mask,
> + u32 val)
> +{
> + u32 new_val;
> +
> + if (!is_gcr_valid(offset))
> + return -EINVAL;
> +
> + spin_lock(&pmc->gcr_lock);
> + new_val = readl(pmc->gcr_mem_base + offset);
> +
> + new_val = (new_val & ~mask) | (val & mask);
> + writel(new_val, pmc->gcr_mem_base + offset);
> +
> + new_val = readl(pmc->gcr_mem_base + offset);
> + spin_unlock(&pmc->gcr_lock);
> +
> + /* Check whether the bit update is successful */
> + return (new_val & mask) != (val & mask) ? -EIO : 0;
> +}
> +
> +/**
> + * intel_pmc_s0ix_counter_read() - Read S0ix residency
> + * @pmc: PMC device pointer
> + * @data: Out param that contains current S0ix residency count.
> + *
> + * Writes to @data how many usecs the system has been in low-power S0ix
> + * state.
> + *
> + * Return: An error code or 0 on success.
> + */
> +int intel_pmc_s0ix_counter_read(struct intel_pmc_dev *pmc, u64 *data)
> +{
> + u64 deep, shlw;
> +
> + spin_lock(&pmc->gcr_lock);
> + deep = readq(pmc->gcr_mem_base + PMC_GCR_TELEM_DEEP_S0IX_REG);
> + shlw = readq(pmc->gcr_mem_base + PMC_GCR_TELEM_SHLW_S0IX_REG);
> + spin_unlock(&pmc->gcr_lock);
> +
> + *data = S0IX_RESIDENCY_IN_USECS(deep, shlw);
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(intel_pmc_s0ix_counter_read);
> +
> +/**
> + * simplecmd_store() - Send a simple IPC command
> + * @dev: Device under the attribute is
> + * @attr: Attribute in question
> + * @buf: Buffer holding data to be stored to the attribute
> + * @count: Number of bytes in @buf
> + *
> + * Expects a string with two integers separated with space. These two
> + * values hold command and subcommand that is send to PMC.
> + *
> + * Return: Number number of bytes written (@count) or negative errno in
> + * case of error.
> + */
> +static ssize_t simplecmd_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct intel_pmc_dev *pmc = dev_get_drvdata(dev);
> + struct intel_scu_ipc_dev *scu = pmc->scu;
> + int subcmd;
> + int cmd;
> + int ret;
> +
> + ret = sscanf(buf, "%d %d", &cmd, &subcmd);
> + if (ret != 2) {
> + dev_err(dev, "Invalid values, expected: cmd subcmd\n");
> + return -EINVAL;
> + }
> +
> + ret = intel_scu_ipc_dev_simple_command(scu, cmd, subcmd);
> + if (ret)
> + return ret;
> +
> + return count;
> +}
> +static DEVICE_ATTR_WO(simplecmd);
> +
> +/**
> + * northpeak_store() - Enable or disable Northpeak
> + * @dev: Device under the attribute is
> + * @attr: Attribute in question
> + * @buf: Buffer holding data to be stored to the attribute
> + * @count: Number of bytes in @buf
> + *
> + * Expects an unsigned integer. Non-zero enables Northpeak and zero
> + * disables it.
> + *
> + * Return: Number number of bytes written (@count) or negative errno in
> + * case of error.
> + */
> +static ssize_t northpeak_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct intel_pmc_dev *pmc = dev_get_drvdata(dev);
> + struct intel_scu_ipc_dev *scu = pmc->scu;
> + unsigned long val;
> + int subcmd;
> + int ret;
> +
> + ret = kstrtoul(buf, 0, &val);
> + if (ret)
> + return ret;
> +
> + /* Northpeak is enabled if subcmd == 1 and disabled if it is 0 */
> + if (val)
> + subcmd = 1;
> + else
> + subcmd = 0;
> +
> + ret = intel_scu_ipc_dev_simple_command(scu, PMC_NORTHPEAK_CTRL, subcmd);
> + if (ret)
> + return ret;
> +
> + return count;
> +}
> +static DEVICE_ATTR_WO(northpeak);
> +
> +static struct attribute *intel_pmc_attrs[] = {
> + &dev_attr_northpeak.attr,
> + &dev_attr_simplecmd.attr,
> + NULL
> +};
> +
> +static const struct attribute_group intel_pmc_group = {
> + .attrs = intel_pmc_attrs,
> +};
> +
> +static const struct attribute_group *intel_pmc_groups[] = {
> + &intel_pmc_group,
> + NULL
> +};
> +
> +/*
> + * We use the below templates to construct MFD cells. The struct
> + * intel_pmc_dev instance holds the real MFD cells where we first copy
> + * these and then fill the dynamic parts based on the extracted resources.
> + */
> +
> +static const struct mfd_cell punit = {
> + .name = "intel_punit_ipc",
> +};
> +
> +static int update_no_reboot_bit(void *priv, bool set)
> +{
> + struct intel_pmc_dev *pmc = priv;
> + u32 bits = PMC_CFG_NO_REBOOT_EN;
> + u32 value = set ? bits : 0;
> +
> + return intel_pmc_gcr_update(pmc, PMC_GCR_PMC_CFG_REG, bits, value);
> +}
> +
> +static const struct itco_wdt_platform_data tco_pdata = {
> + .name = "Apollo Lake SoC",
> + .version = 5,
> + .update_no_reboot_bit = update_no_reboot_bit,
> +};
> +
> +static const struct mfd_cell tco = {
> + .name = "iTCO_wdt",
> + .ignore_resource_conflicts = true,
> +};
> +
> +static const struct resource telem_res[] = {
> + DEFINE_RES_MEM(TELEM_PUNIT_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
> + DEFINE_RES_MEM(TELEM_PMC_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
> +};
> +
> +static const struct mfd_cell telem = {
> + .name = "intel_telemetry",
> + .resources = telem_res,
> + .num_resources = ARRAY_SIZE(telem_res),
> +};
> +
> +static int intel_pmc_get_tco_resources(struct platform_device *pdev,
> + struct intel_pmc_dev *pmc)
> +{
> + struct itco_wdt_platform_data *pdata;
> + struct resource *res, *tco_res;
> +
> + if (acpi_has_watchdog())
> + return 0;
> +
> + res = platform_get_resource(pdev, IORESOURCE_IO,
> + PLAT_RESOURCE_ACPI_IO_INDEX);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get IO resource\n");
> + return -EINVAL;
> + }
> +
> + tco_res = devm_kcalloc(&pdev->dev, 2, sizeof(*tco_res), GFP_KERNEL);
> + if (!tco_res)
> + return -ENOMEM;
> +
> + tco_res[0].flags = IORESOURCE_IO;
> + tco_res[0].start = res->start + TCO_BASE_OFFSET;
> + tco_res[0].end = tco_res[0].start + TCO_REGS_SIZE - 1;
> + tco_res[1].flags = IORESOURCE_IO;
> + tco_res[1].start = res->start + SMI_EN_OFFSET;
> + tco_res[1].end = tco_res[1].start + SMI_EN_SIZE - 1;
> +
> + pmc->cells[PMC_TCO].resources = tco_res;
> + pmc->cells[PMC_TCO].num_resources = 2;
> +
> + pdata = devm_kmemdup(&pdev->dev, &tco_pdata, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return -ENOMEM;
> +
> + pdata->no_reboot_priv = pmc;
> + pmc->cells[PMC_TCO].platform_data = pdata;
> + pmc->cells[PMC_TCO].pdata_size = sizeof(*pdata);
> +
> + return 0;
> +}
> +
> +static int intel_pmc_get_resources(struct platform_device *pdev,
> + struct intel_pmc_dev *pmc,
> + struct intel_scu_ipc_data *scu_data)
> +{
> + struct resource *res, *punit_res;
> + struct resource gcr_res;
> + size_t npunit_res = 0;
> + int ret;
> +
> + scu_data->irq = platform_get_irq_optional(pdev, 0);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_IPC_INDEX);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get IPC resource\n");
> + return -EINVAL;
> + }
> +
> + /* IPC registers */
> + scu_data->mem.flags = res->flags;
> + scu_data->mem.start = res->start;
> + scu_data->mem.end = res->start + PLAT_RESOURCE_IPC_SIZE - 1;
> +
> + /* GCR registers */
> + gcr_res.flags = res->flags;
> + gcr_res.start = res->start + PLAT_RESOURCE_GCR_OFFSET;
> + gcr_res.end = gcr_res.start + PLAT_RESOURCE_GCR_SIZE - 1;
> +
> + pmc->gcr_mem_base = devm_ioremap_resource(&pdev->dev, &gcr_res);
> + if (IS_ERR(pmc->gcr_mem_base))
> + return PTR_ERR(pmc->gcr_mem_base);
> +
> + pmc->cells[PMC_TCO] = tco;
> + pmc->cells[PMC_PUNIT] = punit;
> + pmc->cells[PMC_TELEM] = telem;
> +
> + /* Only register iTCO watchdog if there is no WDAT ACPI table */
> + ret = intel_pmc_get_tco_resources(pdev, pmc);
> + if (ret)
> + return ret;
> +
> + punit_res = devm_kcalloc(&pdev->dev, 6, sizeof(*punit_res), GFP_KERNEL);
> + if (!punit_res)
> + return -ENOMEM;
> +
> + /* BIOS data register */
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_BIOS_DATA_INDEX);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get resource of P-unit BIOS data\n");
> + return -EINVAL;
> + }
> + punit_res[npunit_res++] = *res;
> +
> + /* BIOS interface register */
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_BIOS_IFACE_INDEX);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get resource of P-unit BIOS interface\n");
> + return -EINVAL;
> + }
> + punit_res[npunit_res++] = *res;
> +
> + /* ISP data register, optional */
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_ISP_DATA_INDEX);
> + if (res)
> + punit_res[npunit_res++] = *res;
> +
> + /* ISP interface register, optional */
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_ISP_IFACE_INDEX);
> + if (res)
> + punit_res[npunit_res++] = *res;
> +
> + /* GTD data register, optional */
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_GTD_DATA_INDEX);
> + if (res)
> + punit_res[npunit_res++] = *res;
> +
> + /* GTD interface register, optional */
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_GTD_IFACE_INDEX);
> + if (res)
> + punit_res[npunit_res++] = *res;
> +
> + pmc->cells[PMC_PUNIT].resources = punit_res;
> + pmc->cells[PMC_PUNIT].num_resources = npunit_res;
> +
> + /* Telemetry SSRAM is optional */
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_TELEM_SSRAM_INDEX);
> + if (res)
> + pmc->telem_base = res;
> +
> + return 0;
> +}
> +
> +static int intel_pmc_create_devices(struct intel_pmc_dev *pmc)
> +{
> + int ret;
> +
> + if (!acpi_has_watchdog()) {
> + ret = devm_mfd_add_devices(pmc->dev, PLATFORM_DEVID_AUTO,
> + &pmc->cells[PMC_TCO], 1, NULL, 0, NULL);
> + if (ret)
> + return ret;
> + }
> +
> + ret = devm_mfd_add_devices(pmc->dev, PLATFORM_DEVID_AUTO,
> + &pmc->cells[PMC_PUNIT], 1, NULL, 0, NULL);
> + if (ret)
> + return ret;
> +
> + if (pmc->telem_base) {
> + ret = devm_mfd_add_devices(pmc->dev, PLATFORM_DEVID_AUTO,
> + &pmc->cells[PMC_TELEM], 1,
> + pmc->telem_base, 0, NULL);
> + }
> +
> + return ret;
> +}
> +
> +static const struct acpi_device_id intel_pmc_acpi_ids[] = {
> + { "INT34D2" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(acpi, intel_pmc_acpi_ids);
> +
> +static int intel_pmc_probe(struct platform_device *pdev)
> +{
> + struct intel_scu_ipc_data scu_data = {};
> + struct intel_pmc_dev *pmc;
> + int ret;
> +
> + pmc = devm_kzalloc(&pdev->dev, sizeof(*pmc), GFP_KERNEL);
> + if (!pmc)
> + return -ENOMEM;
> +
> + pmc->dev = &pdev->dev;
> + spin_lock_init(&pmc->gcr_lock);
> +
> + ret = intel_pmc_get_resources(pdev, pmc, &scu_data);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to request resources\n");
> + return ret;
> + }
> +
> + pmc->scu = devm_intel_scu_ipc_register(&pdev->dev, &scu_data);
> + if (IS_ERR(pmc->scu))
> + return PTR_ERR(pmc->scu);
> +
> + platform_set_drvdata(pdev, pmc);
> +
> + ret = intel_pmc_create_devices(pmc);
> + if (ret)
> + dev_err(&pdev->dev, "Failed to create PMC devices\n");
> +
> + return ret;
> +}
> +
> +static struct platform_driver intel_pmc_driver = {
> + .probe = intel_pmc_probe,
> + .driver = {
> + .name = "intel_pmc_bxt",
> + .acpi_match_table = intel_pmc_acpi_ids,
> + .dev_groups = intel_pmc_groups,
> + },
> +};
> +module_platform_driver(intel_pmc_driver);
> +
> +MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
> +MODULE_AUTHOR("Zha Qipeng <qipeng.zha@intel.com>");
> +MODULE_DESCRIPTION("Intel Broxton PMC driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 13681f4ec2c5..d989d4030b75 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -1261,7 +1261,8 @@ config INTEL_UNCORE_FREQ_CONTROL
> config INTEL_BXTWC_PMIC_TMU
> tristate "Intel BXT Whiskey Cove TMU Driver"
> depends on REGMAP
> - depends on INTEL_SOC_PMIC_BXTWC && INTEL_PMC_IPC
> + depends on MFD_INTEL_PMC_BXT
> + depends on INTEL_SOC_PMIC_BXTWC
> ---help---
> Select this driver to use Intel BXT Whiskey Cove PMIC TMU feature.
> This driver enables the alarm wakeup functionality in the TMU unit
> @@ -1319,15 +1320,6 @@ config INTEL_PMC_CORE
> - LTR Ignore
> - MPHY/PLL gating status (Sunrisepoint PCH only)
>
> -config INTEL_PMC_IPC
> - tristate "Intel PMC IPC Driver"
> - depends on ACPI
> - select INTEL_SCU_IPC
> - ---help---
> - This driver provides support for PMC control on some Intel platforms.
> - The PMC is an ARC processor which defines IPC commands for communication
> - with other entities in the CPU.
> -
> config INTEL_PUNIT_IPC
> tristate "Intel P-Unit IPC Driver"
> ---help---
> @@ -1366,7 +1358,9 @@ config INTEL_SCU_IPC_UTIL
>
> config INTEL_TELEMETRY
> tristate "Intel SoC Telemetry Driver"
> - depends on INTEL_PMC_IPC && INTEL_PUNIT_IPC && X86_64
> + depends on X86_64
> + depends on MFD_INTEL_PMC_BXT
> + depends on INTEL_PUNIT_IPC
> ---help---
> This driver provides interfaces to configure and use
> telemetry for INTEL SoC from APL onwards. It is also
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index a750bd8c1e81..193c77f71c33 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -137,7 +137,6 @@ obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o
> obj-$(CONFIG_INTEL_MID_POWER_BUTTON) += intel_mid_powerbtn.o
> obj-$(CONFIG_INTEL_MRFLD_PWRBTN) += intel_mrfld_pwrbtn.o
> obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o intel_pmc_core_pltdrv.o
> -obj-$(CONFIG_INTEL_PMC_IPC) += intel_pmc_ipc.o
> obj-$(CONFIG_INTEL_PUNIT_IPC) += intel_punit_ipc.o
> obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o
> obj-$(CONFIG_INTEL_SCU_PCI) += intel_scu_pcidrv.o
> diff --git a/drivers/platform/x86/intel_pmc_ipc.c b/drivers/platform/x86/intel_pmc_ipc.c
> deleted file mode 100644
> index c006609ef74b..000000000000
> --- a/drivers/platform/x86/intel_pmc_ipc.c
> +++ /dev/null
> @@ -1,645 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * Driver for the Intel PMC IPC mechanism
> - *
> - * (C) Copyright 2014-2015 Intel Corporation
> - *
> - * This driver is based on Intel SCU IPC driver(intel_scu_ipc.c) by
> - * Sreedhara DS <sreedhara.ds@intel.com>
> - *
> - * PMC running in ARC processor communicates with other entity running in IA
> - * core through IPC mechanism which in turn messaging between IA core ad PMC.
> - */
> -
> -#include <linux/acpi.h>
> -#include <linux/delay.h>
> -#include <linux/errno.h>
> -#include <linux/interrupt.h>
> -#include <linux/io-64-nonatomic-lo-hi.h>
> -#include <linux/module.h>
> -#include <linux/platform_device.h>
> -
> -#include <asm/intel_pmc_ipc.h>
> -#include <asm/intel_scu_ipc.h>
> -
> -#include <linux/platform_data/itco_wdt.h>
> -
> -/* Residency with clock rate at 19.2MHz to usecs */
> -#define S0IX_RESIDENCY_IN_USECS(d, s) \
> -({ \
> - u64 result = 10ull * ((d) + (s)); \
> - do_div(result, 192); \
> - result; \
> -})
> -
> -/* exported resources from IFWI */
> -#define PLAT_RESOURCE_IPC_INDEX 0
> -#define PLAT_RESOURCE_IPC_SIZE 0x1000
> -#define PLAT_RESOURCE_GCR_OFFSET 0x1000
> -#define PLAT_RESOURCE_GCR_SIZE 0x1000
> -#define PLAT_RESOURCE_BIOS_DATA_INDEX 1
> -#define PLAT_RESOURCE_BIOS_IFACE_INDEX 2
> -#define PLAT_RESOURCE_TELEM_SSRAM_INDEX 3
> -#define PLAT_RESOURCE_ISP_DATA_INDEX 4
> -#define PLAT_RESOURCE_ISP_IFACE_INDEX 5
> -#define PLAT_RESOURCE_GTD_DATA_INDEX 6
> -#define PLAT_RESOURCE_GTD_IFACE_INDEX 7
> -#define PLAT_RESOURCE_ACPI_IO_INDEX 0
> -
> -/*
> - * BIOS does not create an ACPI device for each PMC function,
> - * but exports multiple resources from one ACPI device(IPC) for
> - * multiple functions. This driver is responsible to create a
> - * platform device and to export resources for those functions.
> - */
> -#define TCO_DEVICE_NAME "iTCO_wdt"
> -#define SMI_EN_OFFSET 0x40
> -#define SMI_EN_SIZE 4
> -#define TCO_BASE_OFFSET 0x60
> -#define TCO_REGS_SIZE 16
> -#define PUNIT_DEVICE_NAME "intel_punit_ipc"
> -#define TELEMETRY_DEVICE_NAME "intel_telemetry"
> -#define TELEM_SSRAM_SIZE 240
> -#define TELEM_PMC_SSRAM_OFFSET 0x1B00
> -#define TELEM_PUNIT_SSRAM_OFFSET 0x1A00
> -#define TCO_PMC_OFFSET 0x08
> -#define TCO_PMC_SIZE 0x04
> -
> -/* PMC register bit definitions */
> -
> -/* PMC_CFG_REG bit masks */
> -#define PMC_CFG_NO_REBOOT_MASK BIT_MASK(4)
> -#define PMC_CFG_NO_REBOOT_EN (1 << 4)
> -#define PMC_CFG_NO_REBOOT_DIS (0 << 4)
> -
> -static struct intel_pmc_ipc_dev {
> - struct device *dev;
> -
> - /* The following PMC BARs share the same ACPI device with the IPC */
> - resource_size_t acpi_io_base;
> - int acpi_io_size;
> - struct platform_device *tco_dev;
> -
> - /* gcr */
> - void __iomem *gcr_mem_base;
> - bool has_gcr_regs;
> - spinlock_t gcr_lock;
> -
> - /* punit */
> - struct platform_device *punit_dev;
> - unsigned int punit_res_count;
> -
> - /* Telemetry */
> - resource_size_t telem_pmc_ssram_base;
> - resource_size_t telem_punit_ssram_base;
> - int telem_pmc_ssram_size;
> - int telem_punit_ssram_size;
> - u8 telem_res_inval;
> - struct platform_device *telemetry_dev;
> -} ipcdev;
> -
> -static inline u64 gcr_data_readq(u32 offset)
> -{
> - return readq(ipcdev.gcr_mem_base + offset);
> -}
> -
> -static inline int is_gcr_valid(u32 offset)
> -{
> - if (!ipcdev.has_gcr_regs)
> - return -EACCES;
> -
> - if (offset > PLAT_RESOURCE_GCR_SIZE)
> - return -EINVAL;
> -
> - return 0;
> -}
> -
> -/**
> - * intel_pmc_gcr_read64() - Read a 64-bit PMC GCR register
> - * @offset: offset of GCR register from GCR address base
> - * @data: data pointer for storing the register output
> - *
> - * Reads the 64-bit PMC GCR register at given offset.
> - *
> - * Return: negative value on error or 0 on success.
> - */
> -int intel_pmc_gcr_read64(u32 offset, u64 *data)
> -{
> - int ret;
> -
> - spin_lock(&ipcdev.gcr_lock);
> -
> - ret = is_gcr_valid(offset);
> - if (ret < 0) {
> - spin_unlock(&ipcdev.gcr_lock);
> - return ret;
> - }
> -
> - *data = readq(ipcdev.gcr_mem_base + offset);
> -
> - spin_unlock(&ipcdev.gcr_lock);
> -
> - return 0;
> -}
> -EXPORT_SYMBOL_GPL(intel_pmc_gcr_read64);
> -
> -/**
> - * intel_pmc_gcr_update() - Update PMC GCR register bits
> - * @offset: offset of GCR register from GCR address base
> - * @mask: bit mask for update operation
> - * @val: update value
> - *
> - * Updates the bits of given GCR register as specified by
> - * @mask and @val.
> - *
> - * Return: negative value on error or 0 on success.
> - */
> -static int intel_pmc_gcr_update(u32 offset, u32 mask, u32 val)
> -{
> - u32 new_val;
> - int ret = 0;
> -
> - spin_lock(&ipcdev.gcr_lock);
> -
> - ret = is_gcr_valid(offset);
> - if (ret < 0)
> - goto gcr_ipc_unlock;
> -
> - new_val = readl(ipcdev.gcr_mem_base + offset);
> -
> - new_val &= ~mask;
> - new_val |= val & mask;
> -
> - writel(new_val, ipcdev.gcr_mem_base + offset);
> -
> - new_val = readl(ipcdev.gcr_mem_base + offset);
> -
> - /* check whether the bit update is successful */
> - if ((new_val & mask) != (val & mask)) {
> - ret = -EIO;
> - goto gcr_ipc_unlock;
> - }
> -
> -gcr_ipc_unlock:
> - spin_unlock(&ipcdev.gcr_lock);
> - return ret;
> -}
> -
> -static int update_no_reboot_bit(void *priv, bool set)
> -{
> - u32 value = set ? PMC_CFG_NO_REBOOT_EN : PMC_CFG_NO_REBOOT_DIS;
> -
> - return intel_pmc_gcr_update(PMC_GCR_PMC_CFG_REG,
> - PMC_CFG_NO_REBOOT_MASK, value);
> -}
> -
> -static ssize_t intel_pmc_ipc_simple_cmd_store(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf, size_t count)
> -{
> - struct intel_scu_ipc_dev *scu = dev_get_drvdata(dev);
> - int subcmd;
> - int cmd;
> - int ret;
> -
> - ret = sscanf(buf, "%d %d", &cmd, &subcmd);
> - if (ret != 2) {
> - dev_err(dev, "Error args\n");
> - return -EINVAL;
> - }
> -
> - ret = intel_scu_ipc_dev_simple_command(scu, cmd, subcmd);
> - if (ret) {
> - dev_err(dev, "command %d error with %d\n", cmd, ret);
> - return ret;
> - }
> - return (ssize_t)count;
> -}
> -static DEVICE_ATTR(simplecmd, 0200, NULL, intel_pmc_ipc_simple_cmd_store);
> -
> -static ssize_t intel_pmc_ipc_northpeak_store(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf, size_t count)
> -{
> - struct intel_scu_ipc_dev *scu = dev_get_drvdata(dev);
> - unsigned long val;
> - int subcmd;
> - int ret;
> -
> - ret = kstrtoul(buf, 0, &val);
> - if (ret)
> - return ret;
> -
> - if (val)
> - subcmd = 1;
> - else
> - subcmd = 0;
> - ret = intel_scu_ipc_dev_simple_command(scu, PMC_IPC_NORTHPEAK_CTRL, subcmd);
> - if (ret) {
> - dev_err(dev, "command north %d error with %d\n", subcmd, ret);
> - return ret;
> - }
> - return (ssize_t)count;
> -}
> -static DEVICE_ATTR(northpeak, 0200, NULL, intel_pmc_ipc_northpeak_store);
> -
> -static struct attribute *intel_ipc_attrs[] = {
> - &dev_attr_northpeak.attr,
> - &dev_attr_simplecmd.attr,
> - NULL
> -};
> -
> -static const struct attribute_group intel_ipc_group = {
> - .attrs = intel_ipc_attrs,
> -};
> -
> -static const struct attribute_group *intel_ipc_groups[] = {
> - &intel_ipc_group,
> - NULL
> -};
> -
> -static struct resource punit_res_array[] = {
> - /* Punit BIOS */
> - {
> - .flags = IORESOURCE_MEM,
> - },
> - {
> - .flags = IORESOURCE_MEM,
> - },
> - /* Punit ISP */
> - {
> - .flags = IORESOURCE_MEM,
> - },
> - {
> - .flags = IORESOURCE_MEM,
> - },
> - /* Punit GTD */
> - {
> - .flags = IORESOURCE_MEM,
> - },
> - {
> - .flags = IORESOURCE_MEM,
> - },
> -};
> -
> -#define TCO_RESOURCE_ACPI_IO 0
> -#define TCO_RESOURCE_SMI_EN_IO 1
> -#define TCO_RESOURCE_GCR_MEM 2
> -static struct resource tco_res[] = {
> - /* ACPI - TCO */
> - {
> - .flags = IORESOURCE_IO,
> - },
> - /* ACPI - SMI */
> - {
> - .flags = IORESOURCE_IO,
> - },
> -};
> -
> -static struct itco_wdt_platform_data tco_info = {
> - .name = "Apollo Lake SoC",
> - .version = 5,
> - .no_reboot_priv = &ipcdev,
> - .update_no_reboot_bit = update_no_reboot_bit,
> -};
> -
> -#define TELEMETRY_RESOURCE_PUNIT_SSRAM 0
> -#define TELEMETRY_RESOURCE_PMC_SSRAM 1
> -static struct resource telemetry_res[] = {
> - /*Telemetry*/
> - {
> - .flags = IORESOURCE_MEM,
> - },
> - {
> - .flags = IORESOURCE_MEM,
> - },
> -};
> -
> -static int ipc_create_punit_device(void)
> -{
> - struct platform_device *pdev;
> - const struct platform_device_info pdevinfo = {
> - .parent = ipcdev.dev,
> - .name = PUNIT_DEVICE_NAME,
> - .id = -1,
> - .res = punit_res_array,
> - .num_res = ipcdev.punit_res_count,
> - };
> -
> - pdev = platform_device_register_full(&pdevinfo);
> - if (IS_ERR(pdev))
> - return PTR_ERR(pdev);
> -
> - ipcdev.punit_dev = pdev;
> -
> - return 0;
> -}
> -
> -static int ipc_create_tco_device(void)
> -{
> - struct platform_device *pdev;
> - struct resource *res;
> - const struct platform_device_info pdevinfo = {
> - .parent = ipcdev.dev,
> - .name = TCO_DEVICE_NAME,
> - .id = -1,
> - .res = tco_res,
> - .num_res = ARRAY_SIZE(tco_res),
> - .data = &tco_info,
> - .size_data = sizeof(tco_info),
> - };
> -
> - res = tco_res + TCO_RESOURCE_ACPI_IO;
> - res->start = ipcdev.acpi_io_base + TCO_BASE_OFFSET;
> - res->end = res->start + TCO_REGS_SIZE - 1;
> -
> - res = tco_res + TCO_RESOURCE_SMI_EN_IO;
> - res->start = ipcdev.acpi_io_base + SMI_EN_OFFSET;
> - res->end = res->start + SMI_EN_SIZE - 1;
> -
> - pdev = platform_device_register_full(&pdevinfo);
> - if (IS_ERR(pdev))
> - return PTR_ERR(pdev);
> -
> - ipcdev.tco_dev = pdev;
> -
> - return 0;
> -}
> -
> -static int ipc_create_telemetry_device(void)
> -{
> - struct platform_device *pdev;
> - struct resource *res;
> - const struct platform_device_info pdevinfo = {
> - .parent = ipcdev.dev,
> - .name = TELEMETRY_DEVICE_NAME,
> - .id = -1,
> - .res = telemetry_res,
> - .num_res = ARRAY_SIZE(telemetry_res),
> - };
> -
> - res = telemetry_res + TELEMETRY_RESOURCE_PUNIT_SSRAM;
> - res->start = ipcdev.telem_punit_ssram_base;
> - res->end = res->start + ipcdev.telem_punit_ssram_size - 1;
> -
> - res = telemetry_res + TELEMETRY_RESOURCE_PMC_SSRAM;
> - res->start = ipcdev.telem_pmc_ssram_base;
> - res->end = res->start + ipcdev.telem_pmc_ssram_size - 1;
> -
> - pdev = platform_device_register_full(&pdevinfo);
> - if (IS_ERR(pdev))
> - return PTR_ERR(pdev);
> -
> - ipcdev.telemetry_dev = pdev;
> -
> - return 0;
> -}
> -
> -static int ipc_create_pmc_devices(void)
> -{
> - int ret;
> -
> - /* If we have ACPI based watchdog use that instead */
> - if (!acpi_has_watchdog()) {
> - ret = ipc_create_tco_device();
> - if (ret) {
> - dev_err(ipcdev.dev, "Failed to add tco platform device\n");
> - return ret;
> - }
> - }
> -
> - ret = ipc_create_punit_device();
> - if (ret) {
> - dev_err(ipcdev.dev, "Failed to add punit platform device\n");
> - platform_device_unregister(ipcdev.tco_dev);
> - return ret;
> - }
> -
> - if (!ipcdev.telem_res_inval) {
> - ret = ipc_create_telemetry_device();
> - if (ret) {
> - dev_warn(ipcdev.dev,
> - "Failed to add telemetry platform device\n");
> - platform_device_unregister(ipcdev.punit_dev);
> - platform_device_unregister(ipcdev.tco_dev);
> - }
> - }
> -
> - return ret;
> -}
> -
> -static int ipc_plat_get_res(struct platform_device *pdev,
> - struct intel_scu_ipc_pdata *pdata)
> -{
> - struct resource *res, *punit_res = punit_res_array;
> - resource_size_t start;
> - void __iomem *addr;
> - int size;
> -
> - res = platform_get_resource(pdev, IORESOURCE_IO,
> - PLAT_RESOURCE_ACPI_IO_INDEX);
> - if (!res) {
> - dev_err(&pdev->dev, "Failed to get io resource\n");
> - return -ENXIO;
> - }
> - size = resource_size(res);
> - ipcdev.acpi_io_base = res->start;
> - ipcdev.acpi_io_size = size;
> - dev_info(&pdev->dev, "io res: %pR\n", res);
> -
> - ipcdev.punit_res_count = 0;
> -
> - /* This is index 0 to cover BIOS data register */
> - res = platform_get_resource(pdev, IORESOURCE_MEM,
> - PLAT_RESOURCE_BIOS_DATA_INDEX);
> - if (!res) {
> - dev_err(&pdev->dev, "Failed to get res of punit BIOS data\n");
> - return -ENXIO;
> - }
> - punit_res[ipcdev.punit_res_count++] = *res;
> - dev_info(&pdev->dev, "punit BIOS data res: %pR\n", res);
> -
> - /* This is index 1 to cover BIOS interface register */
> - res = platform_get_resource(pdev, IORESOURCE_MEM,
> - PLAT_RESOURCE_BIOS_IFACE_INDEX);
> - if (!res) {
> - dev_err(&pdev->dev, "Failed to get res of punit BIOS iface\n");
> - return -ENXIO;
> - }
> - punit_res[ipcdev.punit_res_count++] = *res;
> - dev_info(&pdev->dev, "punit BIOS interface res: %pR\n", res);
> -
> - /* This is index 2 to cover ISP data register, optional */
> - res = platform_get_resource(pdev, IORESOURCE_MEM,
> - PLAT_RESOURCE_ISP_DATA_INDEX);
> - if (res) {
> - punit_res[ipcdev.punit_res_count++] = *res;
> - dev_info(&pdev->dev, "punit ISP data res: %pR\n", res);
> - }
> -
> - /* This is index 3 to cover ISP interface register, optional */
> - res = platform_get_resource(pdev, IORESOURCE_MEM,
> - PLAT_RESOURCE_ISP_IFACE_INDEX);
> - if (res) {
> - punit_res[ipcdev.punit_res_count++] = *res;
> - dev_info(&pdev->dev, "punit ISP interface res: %pR\n", res);
> - }
> -
> - /* This is index 4 to cover GTD data register, optional */
> - res = platform_get_resource(pdev, IORESOURCE_MEM,
> - PLAT_RESOURCE_GTD_DATA_INDEX);
> - if (res) {
> - punit_res[ipcdev.punit_res_count++] = *res;
> - dev_info(&pdev->dev, "punit GTD data res: %pR\n", res);
> - }
> -
> - /* This is index 5 to cover GTD interface register, optional */
> - res = platform_get_resource(pdev, IORESOURCE_MEM,
> - PLAT_RESOURCE_GTD_IFACE_INDEX);
> - if (res) {
> - punit_res[ipcdev.punit_res_count++] = *res;
> - dev_info(&pdev->dev, "punit GTD interface res: %pR\n", res);
> - }
> -
> - pdata->irq = platform_get_irq(pdev, 0);
> -
> - res = platform_get_resource(pdev, IORESOURCE_MEM,
> - PLAT_RESOURCE_IPC_INDEX);
> - if (!res) {
> - dev_err(&pdev->dev, "Failed to get ipc resource\n");
> - return -ENXIO;
> - }
> - dev_info(&pdev->dev, "ipc res: %pR\n", res);
> -
> - pdata->mem.flags = res->flags;
> - pdata->mem.start = res->start;
> - pdata->mem.end = res->start + PLAT_RESOURCE_IPC_SIZE - 1;
> -
> - start = res->start + PLAT_RESOURCE_GCR_OFFSET;
> - if (!devm_request_mem_region(&pdev->dev, start, PLAT_RESOURCE_GCR_SIZE,
> - "pmc_ipc_plat"))
> - return -EBUSY;
> -
> - addr = devm_ioremap(&pdev->dev, start, PLAT_RESOURCE_GCR_SIZE);
> - if (!addr)
> - return -ENOMEM;
> -
> - ipcdev.gcr_mem_base = addr;
> -
> - ipcdev.telem_res_inval = 0;
> - res = platform_get_resource(pdev, IORESOURCE_MEM,
> - PLAT_RESOURCE_TELEM_SSRAM_INDEX);
> - if (!res) {
> - dev_err(&pdev->dev, "Failed to get telemetry ssram resource\n");
> - ipcdev.telem_res_inval = 1;
> - } else {
> - ipcdev.telem_punit_ssram_base = res->start +
> - TELEM_PUNIT_SSRAM_OFFSET;
> - ipcdev.telem_punit_ssram_size = TELEM_SSRAM_SIZE;
> - ipcdev.telem_pmc_ssram_base = res->start +
> - TELEM_PMC_SSRAM_OFFSET;
> - ipcdev.telem_pmc_ssram_size = TELEM_SSRAM_SIZE;
> - dev_info(&pdev->dev, "telemetry ssram res: %pR\n", res);
> - }
> -
> - return 0;
> -}
> -
> -/**
> - * intel_pmc_s0ix_counter_read() - Read S0ix residency.
> - * @data: Out param that contains current S0ix residency count.
> - *
> - * Return: an error code or 0 on success.
> - */
> -int intel_pmc_s0ix_counter_read(u64 *data)
> -{
> - u64 deep, shlw;
> -
> - if (!ipcdev.has_gcr_regs)
> - return -EACCES;
> -
> - deep = gcr_data_readq(PMC_GCR_TELEM_DEEP_S0IX_REG);
> - shlw = gcr_data_readq(PMC_GCR_TELEM_SHLW_S0IX_REG);
> -
> - *data = S0IX_RESIDENCY_IN_USECS(deep, shlw);
> -
> - return 0;
> -}
> -EXPORT_SYMBOL_GPL(intel_pmc_s0ix_counter_read);
> -
> -#ifdef CONFIG_ACPI
> -static const struct acpi_device_id ipc_acpi_ids[] = {
> - { "INT34D2", 0},
> - { }
> -};
> -MODULE_DEVICE_TABLE(acpi, ipc_acpi_ids);
> -#endif
> -
> -static int ipc_plat_probe(struct platform_device *pdev)
> -{
> - struct intel_scu_ipc_pdata pdata = {};
> - struct intel_scu_ipc_dev *scu;
> - int ret;
> -
> - ipcdev.dev = &pdev->dev;
> - spin_lock_init(&ipcdev.gcr_lock);
> -
> - ret = ipc_plat_get_res(pdev, &pdata);
> - if (ret) {
> - dev_err(&pdev->dev, "Failed to request resource\n");
> - return ret;
> - }
> -
> - scu = devm_intel_scu_ipc_register(&pdev->dev, &pdata);
> - if (IS_ERR(scu))
> - return PTR_ERR(scu);
> -
> - platform_set_drvdata(pdev, scu);
> -
> - ret = ipc_create_pmc_devices();
> - if (ret) {
> - dev_err(&pdev->dev, "Failed to create pmc devices\n");
> - return ret;
> - }
> -
> - ipcdev.has_gcr_regs = true;
> -
> - return 0;
> -}
> -
> -static int ipc_plat_remove(struct platform_device *pdev)
> -{
> - platform_device_unregister(ipcdev.tco_dev);
> - platform_device_unregister(ipcdev.punit_dev);
> - platform_device_unregister(ipcdev.telemetry_dev);
> - ipcdev.dev = NULL;
> - return 0;
> -}
> -
> -static struct platform_driver ipc_plat_driver = {
> - .remove = ipc_plat_remove,
> - .probe = ipc_plat_probe,
> - .driver = {
> - .name = "pmc-ipc-plat",
> - .acpi_match_table = ACPI_PTR(ipc_acpi_ids),
> - .dev_groups = intel_ipc_groups,
> - },
> -};
> -
> -static int __init intel_pmc_ipc_init(void)
> -{
> - return platform_driver_register(&ipc_plat_driver);
> -}
> -
> -static void __exit intel_pmc_ipc_exit(void)
> -{
> - platform_driver_unregister(&ipc_plat_driver);
> -}
> -
> -MODULE_AUTHOR("Zha Qipeng <qipeng.zha@intel.com>");
> -MODULE_DESCRIPTION("Intel PMC IPC driver");
> -MODULE_LICENSE("GPL v2");
> -
> -/* Some modules are dependent on this, so init earlier */
> -fs_initcall(intel_pmc_ipc_init);
> -module_exit(intel_pmc_ipc_exit);
> diff --git a/drivers/platform/x86/intel_telemetry_debugfs.c b/drivers/platform/x86/intel_telemetry_debugfs.c
> index 85a456aa0ab9..3a533fa22760 100644
> --- a/drivers/platform/x86/intel_telemetry_debugfs.c
> +++ b/drivers/platform/x86/intel_telemetry_debugfs.c
> @@ -15,6 +15,7 @@
> */
> #include <linux/debugfs.h>
> #include <linux/device.h>
> +#include <linux/mfd/intel_pmc_bxt.h>
> #include <linux/module.h>
> #include <linux/pci.h>
> #include <linux/seq_file.h>
> @@ -22,7 +23,6 @@
>
> #include <asm/cpu_device_id.h>
> #include <asm/intel-family.h>
> -#include <asm/intel_pmc_ipc.h>
> #include <asm/intel_telemetry.h>
>
> #define DRIVER_NAME "telemetry_soc_debugfs"
> @@ -648,10 +648,11 @@ DEFINE_SHOW_ATTRIBUTE(telem_soc_states);
>
> static int telem_s0ix_res_get(void *data, u64 *val)
> {
> + struct telemetry_plt_config *plt_config = telemetry_get_pltdata();
> u64 s0ix_total_res;
> int ret;
>
> - ret = intel_pmc_s0ix_counter_read(&s0ix_total_res);
> + ret = intel_pmc_s0ix_counter_read(plt_config->pmc, &s0ix_total_res);
> if (ret) {
> pr_err("Failed to read S0ix residency");
> return ret;
> @@ -838,12 +839,15 @@ static int pm_suspend_exit_cb(void)
> */
> if (suspend_shlw_ctr_exit == suspend_shlw_ctr_temp &&
> suspend_deep_ctr_exit == suspend_deep_ctr_temp) {
> - ret = intel_pmc_gcr_read64(PMC_GCR_TELEM_SHLW_S0IX_REG,
> + struct telemetry_plt_config *plt_config = telemetry_get_pltdata();
> + struct intel_pmc_dev *pmc = plt_config->pmc;
> +
> + ret = intel_pmc_gcr_read64(pmc, PMC_GCR_TELEM_SHLW_S0IX_REG,
> &suspend_shlw_res_exit);
> if (ret < 0)
> goto out;
>
> - ret = intel_pmc_gcr_read64(PMC_GCR_TELEM_DEEP_S0IX_REG,
> + ret = intel_pmc_gcr_read64(pmc, PMC_GCR_TELEM_DEEP_S0IX_REG,
> &suspend_deep_res_exit);
> if (ret < 0)
> goto out;
> diff --git a/drivers/platform/x86/intel_telemetry_pltdrv.c b/drivers/platform/x86/intel_telemetry_pltdrv.c
> index efcf214d25b1..d2aee90fb0c5 100644
> --- a/drivers/platform/x86/intel_telemetry_pltdrv.c
> +++ b/drivers/platform/x86/intel_telemetry_pltdrv.c
> @@ -1118,6 +1118,8 @@ static int telemetry_pltdrv_probe(struct platform_device *pdev)
>
> telm_conf = (struct telemetry_plt_config *)id->driver_data;
>
> + telm_conf->pmc = dev_get_drvdata(pdev->dev.parent);
> +
> mem = devm_platform_ioremap_resource(pdev, 0);
> if (IS_ERR(mem))
> return PTR_ERR(mem);
> diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
> index 5b986d6c801d..fa3f39336246 100644
> --- a/drivers/usb/typec/tcpm/Kconfig
> +++ b/drivers/usb/typec/tcpm/Kconfig
> @@ -41,8 +41,8 @@ config TYPEC_FUSB302
> config TYPEC_WCOVE
> tristate "Intel WhiskeyCove PMIC USB Type-C PHY driver"
> depends on ACPI
> + depends on MFD_INTEL_PMC_BXT
> depends on INTEL_SOC_PMIC
> - depends on INTEL_PMC_IPC
> depends on BXT_WC_PMIC_OPREGION
> help
> This driver adds support for USB Type-C on Intel Broxton platforms
> diff --git a/include/linux/mfd/intel_pmc_bxt.h b/include/linux/mfd/intel_pmc_bxt.h
> new file mode 100644
> index 000000000000..0e2efa9dcf02
> --- /dev/null
> +++ b/include/linux/mfd/intel_pmc_bxt.h
> @@ -0,0 +1,43 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef MFD_INTEL_PMC_BXT_H
> +#define MFD_INTEL_PMC_BXT_H
> +
> +#include <linux/mfd/core.h>
> +
> +/* GCR reg offsets from GCR base */
> +#define PMC_GCR_PMC_CFG_REG 0x08
> +#define PMC_GCR_TELEM_DEEP_S0IX_REG 0x78
> +#define PMC_GCR_TELEM_SHLW_S0IX_REG 0x80
> +
> +/* Index to cells array in struct intel_pmc_dev */
> +enum {
> + PMC_TCO,
> + PMC_PUNIT,
> + PMC_TELEM,
> + PMC_DEVICE_MAX
> +};
> +
> +/**
> + * struct intel_pmc_dev - Intel PMC device structure
> + * @dev: Pointer to the parent PMC device
> + * @scu: Pointer to the SCU IPC device data structure
> + * @cells: Cells that get populated from the templates and resources. These
> + * will be passed to the MFD core.
> + * @gcr_mem_base: Virtual base address of GCR (Global Configuration Registers)
> + * @gcr_lock: Lock used to serialize access to GCR registers
> + * @telem_base: Pointer to telemetry SSRAM base resource or %NULL if not
> + * available
> + */
> +struct intel_pmc_dev {
> + struct device *dev;
> + struct intel_scu_ipc_dev *scu;
> + struct mfd_cell cells[PMC_DEVICE_MAX];
> + void __iomem *gcr_mem_base;
> + spinlock_t gcr_lock;
> + struct resource *telem_base;
> +};
> +
> +int intel_pmc_s0ix_counter_read(struct intel_pmc_dev *pmc, u64 *data);
> +int intel_pmc_gcr_read64(struct intel_pmc_dev *pmc, u32 offset, u64 *data);
> +
> +#endif /* MFD_INTEL_PMC_BXT_H */
> --
> 2.25.1
>
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 28+ messages in thread* Re: [PATCH v8 18/19] platform/x86: intel_pmc_ipc: Convert to MFD
2020-03-24 10:26 ` Andy Shevchenko
@ 2020-03-24 11:27 ` Lee Jones
0 siblings, 0 replies; 28+ messages in thread
From: Lee Jones @ 2020-03-24 11:27 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Mika Westerberg, Andy Shevchenko, Darren Hart, Greg Kroah-Hartman,
Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT), Zha Qipeng,
David E . Box, Guenter Roeck, Heikki Krogerus, Wim Van Sebroeck,
Platform Driver, Linux Kernel Mailing List
On Tue, 24 Mar 2020, Andy Shevchenko wrote:
> On Tue, Mar 3, 2020 at 3:43 PM Mika Westerberg
> <mika.westerberg@linux.intel.com> wrote:
> >
> > This driver only creates a bunch of platform devices sharing resources
> > belonging to the PMC device. This is pretty much what MFD subsystem is
> > for so move the driver there, renaming it to intel_pmc_bxt.c which
> > should be more clear what it is.
> >
> > MFD subsystem provides nice helper APIs for subdevice creation so
> > convert the driver to use those. Unfortunately the ACPI device includes
> > separate resources for most of the subdevices so we cannot simply call
> > mfd_add_devices() to create all of them but instead we need to call it
> > separately for each device.
> >
> > The new MFD driver continues to expose two sysfs attributes that allow
> > userspace to send IPC commands to the PMC/SCU to avoid breaking any
> > existing applications that may use these. Generally this is bad idea so
> > document this in the ABI documentation.
> >
>
> Lee, are you fine with this?
> I can push it all via my tree and prepare IB for you.
Funny you should ask - it's next on my list.
> > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> > Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > ---
> > .../ABI/obsolete/sysfs-driver-intel_pmc_bxt | 22 +
> > arch/x86/include/asm/intel_pmc_ipc.h | 47 --
> > arch/x86/include/asm/intel_telemetry.h | 1 +
> > drivers/mfd/Kconfig | 16 +-
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/intel_pmc_bxt.c | 504 ++++++++++++++
> > drivers/platform/x86/Kconfig | 16 +-
> > drivers/platform/x86/Makefile | 1 -
> > drivers/platform/x86/intel_pmc_ipc.c | 645 ------------------
> > .../platform/x86/intel_telemetry_debugfs.c | 12 +-
> > drivers/platform/x86/intel_telemetry_pltdrv.c | 2 +
> > drivers/usb/typec/tcpm/Kconfig | 2 +-
> > include/linux/mfd/intel_pmc_bxt.h | 43 ++
> > 13 files changed, 602 insertions(+), 710 deletions(-)
> > create mode 100644 Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
> > delete mode 100644 arch/x86/include/asm/intel_pmc_ipc.h
> > create mode 100644 drivers/mfd/intel_pmc_bxt.c
> > delete mode 100644 drivers/platform/x86/intel_pmc_ipc.c
> > create mode 100644 include/linux/mfd/intel_pmc_bxt.h
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v8 18/19] platform/x86: intel_pmc_ipc: Convert to MFD
2020-03-03 13:36 ` [PATCH v8 18/19] platform/x86: intel_pmc_ipc: Convert to MFD Mika Westerberg
2020-03-24 10:26 ` Andy Shevchenko
@ 2020-03-24 11:52 ` Lee Jones
2020-03-24 12:22 ` Mika Westerberg
1 sibling, 1 reply; 28+ messages in thread
From: Lee Jones @ 2020-03-24 11:52 UTC (permalink / raw)
To: Mika Westerberg
Cc: Andy Shevchenko, Darren Hart, Greg Kroah-Hartman, Thomas Gleixner,
Ingo Molnar, Borislav Petkov, H . Peter Anvin, x86, Zha Qipeng,
David E . Box, Guenter Roeck, Heikki Krogerus, Wim Van Sebroeck,
platform-driver-x86, linux-kernel
On Tue, 03 Mar 2020, Mika Westerberg wrote:
> This driver only creates a bunch of platform devices sharing resources
> belonging to the PMC device. This is pretty much what MFD subsystem is
> for so move the driver there, renaming it to intel_pmc_bxt.c which
> should be more clear what it is.
>
> MFD subsystem provides nice helper APIs for subdevice creation so
> convert the driver to use those. Unfortunately the ACPI device includes
> separate resources for most of the subdevices so we cannot simply call
> mfd_add_devices() to create all of them but instead we need to call it
> separately for each device.
>
> The new MFD driver continues to expose two sysfs attributes that allow
> userspace to send IPC commands to the PMC/SCU to avoid breaking any
> existing applications that may use these. Generally this is bad idea so
> document this in the ABI documentation.
>
> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> .../ABI/obsolete/sysfs-driver-intel_pmc_bxt | 22 +
> arch/x86/include/asm/intel_pmc_ipc.h | 47 --
> arch/x86/include/asm/intel_telemetry.h | 1 +
> drivers/mfd/Kconfig | 16 +-
> drivers/mfd/Makefile | 1 +
> drivers/mfd/intel_pmc_bxt.c | 504 ++++++++++++++
> drivers/platform/x86/Kconfig | 16 +-
> drivers/platform/x86/Makefile | 1 -
> drivers/platform/x86/intel_pmc_ipc.c | 645 ------------------
> .../platform/x86/intel_telemetry_debugfs.c | 12 +-
> drivers/platform/x86/intel_telemetry_pltdrv.c | 2 +
> drivers/usb/typec/tcpm/Kconfig | 2 +-
> include/linux/mfd/intel_pmc_bxt.h | 43 ++
> 13 files changed, 602 insertions(+), 710 deletions(-)
> create mode 100644 Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
> delete mode 100644 arch/x86/include/asm/intel_pmc_ipc.h
> create mode 100644 drivers/mfd/intel_pmc_bxt.c
> delete mode 100644 drivers/platform/x86/intel_pmc_ipc.c
> create mode 100644 include/linux/mfd/intel_pmc_bxt.h
[...]
> +/*
> + * We use the below templates to construct MFD cells. The struct
> + * intel_pmc_dev instance holds the real MFD cells where we first copy
> + * these and then fill the dynamic parts based on the extracted resources.
> + */
> +
> +static const struct mfd_cell punit = {
> + .name = "intel_punit_ipc",
> +};
> +
> +static int update_no_reboot_bit(void *priv, bool set)
> +{
> + struct intel_pmc_dev *pmc = priv;
> + u32 bits = PMC_CFG_NO_REBOOT_EN;
> + u32 value = set ? bits : 0;
> +
> + return intel_pmc_gcr_update(pmc, PMC_GCR_PMC_CFG_REG, bits, value);
> +}
> +
> +static const struct itco_wdt_platform_data tco_pdata = {
> + .name = "Apollo Lake SoC",
> + .version = 5,
> + .update_no_reboot_bit = update_no_reboot_bit,
> +};
> +
> +static const struct mfd_cell tco = {
> + .name = "iTCO_wdt",
> + .ignore_resource_conflicts = true,
> +};
> +
> +static const struct resource telem_res[] = {
> + DEFINE_RES_MEM(TELEM_PUNIT_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
> + DEFINE_RES_MEM(TELEM_PMC_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
> +};
> +
> +static const struct mfd_cell telem = {
> + .name = "intel_telemetry",
> + .resources = telem_res,
> + .num_resources = ARRAY_SIZE(telem_res),
> +};
> +
> +static int intel_pmc_get_tco_resources(struct platform_device *pdev,
> + struct intel_pmc_dev *pmc)
> +{
> + struct itco_wdt_platform_data *pdata;
> + struct resource *res, *tco_res;
> +
> + if (acpi_has_watchdog())
> + return 0;
> +
> + res = platform_get_resource(pdev, IORESOURCE_IO,
> + PLAT_RESOURCE_ACPI_IO_INDEX);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get IO resource\n");
> + return -EINVAL;
> + }
> +
> + tco_res = devm_kcalloc(&pdev->dev, 2, sizeof(*tco_res), GFP_KERNEL);
> + if (!tco_res)
> + return -ENOMEM;
> +
> + tco_res[0].flags = IORESOURCE_IO;
> + tco_res[0].start = res->start + TCO_BASE_OFFSET;
> + tco_res[0].end = tco_res[0].start + TCO_REGS_SIZE - 1;
> + tco_res[1].flags = IORESOURCE_IO;
> + tco_res[1].start = res->start + SMI_EN_OFFSET;
> + tco_res[1].end = tco_res[1].start + SMI_EN_SIZE - 1;
> +
> + pmc->cells[PMC_TCO].resources = tco_res;
> + pmc->cells[PMC_TCO].num_resources = 2;
> +
> + pdata = devm_kmemdup(&pdev->dev, &tco_pdata, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return -ENOMEM;
Why do you need to take a copy?
This can be referenced directly in 'mfd_cell tco', no?
> + pdata->no_reboot_priv = pmc;
You're putting device data inside platform data?
This doesn't sit right with me at all.
You already saved it using platform_set_drvdata(), why do you need it
twice? Why can't you export update_no_reboot_bit() and make it take
'struct intel_pmc_dev' or better yet 'pdev' as an argument?
> + pmc->cells[PMC_TCO].platform_data = pdata;
> + pmc->cells[PMC_TCO].pdata_size = sizeof(*pdata);
> +
> + return 0;
> +}
> +
> +static int intel_pmc_get_resources(struct platform_device *pdev,
> + struct intel_pmc_dev *pmc,
> + struct intel_scu_ipc_data *scu_data)
> +{
> + struct resource *res, *punit_res;
> + struct resource gcr_res;
> + size_t npunit_res = 0;
> + int ret;
> +
> + scu_data->irq = platform_get_irq_optional(pdev, 0);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_IPC_INDEX);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get IPC resource\n");
> + return -EINVAL;
> + }
> +
> + /* IPC registers */
> + scu_data->mem.flags = res->flags;
> + scu_data->mem.start = res->start;
> + scu_data->mem.end = res->start + PLAT_RESOURCE_IPC_SIZE - 1;
> +
> + /* GCR registers */
> + gcr_res.flags = res->flags;
> + gcr_res.start = res->start + PLAT_RESOURCE_GCR_OFFSET;
> + gcr_res.end = gcr_res.start + PLAT_RESOURCE_GCR_SIZE - 1;
> +
> + pmc->gcr_mem_base = devm_ioremap_resource(&pdev->dev, &gcr_res);
> + if (IS_ERR(pmc->gcr_mem_base))
> + return PTR_ERR(pmc->gcr_mem_base);
> +
> + pmc->cells[PMC_TCO] = tco;
> + pmc->cells[PMC_PUNIT] = punit;
> + pmc->cells[PMC_TELEM] = telem;
Why are you still saving these to device data?
What's stopping you operating on the structures directly?
[...]
Remainder looks half sane.
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 28+ messages in thread* Re: [PATCH v8 18/19] platform/x86: intel_pmc_ipc: Convert to MFD
2020-03-24 11:52 ` Lee Jones
@ 2020-03-24 12:22 ` Mika Westerberg
2020-03-24 14:22 ` Lee Jones
0 siblings, 1 reply; 28+ messages in thread
From: Mika Westerberg @ 2020-03-24 12:22 UTC (permalink / raw)
To: Lee Jones
Cc: Andy Shevchenko, Darren Hart, Greg Kroah-Hartman, Thomas Gleixner,
Ingo Molnar, Borislav Petkov, H . Peter Anvin, x86, Zha Qipeng,
David E . Box, Guenter Roeck, Heikki Krogerus, Wim Van Sebroeck,
platform-driver-x86, linux-kernel
On Tue, Mar 24, 2020 at 11:52:19AM +0000, Lee Jones wrote:
> On Tue, 03 Mar 2020, Mika Westerberg wrote:
>
> > This driver only creates a bunch of platform devices sharing resources
> > belonging to the PMC device. This is pretty much what MFD subsystem is
> > for so move the driver there, renaming it to intel_pmc_bxt.c which
> > should be more clear what it is.
> >
> > MFD subsystem provides nice helper APIs for subdevice creation so
> > convert the driver to use those. Unfortunately the ACPI device includes
> > separate resources for most of the subdevices so we cannot simply call
> > mfd_add_devices() to create all of them but instead we need to call it
> > separately for each device.
> >
> > The new MFD driver continues to expose two sysfs attributes that allow
> > userspace to send IPC commands to the PMC/SCU to avoid breaking any
> > existing applications that may use these. Generally this is bad idea so
> > document this in the ABI documentation.
> >
> > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> > Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > ---
> > .../ABI/obsolete/sysfs-driver-intel_pmc_bxt | 22 +
> > arch/x86/include/asm/intel_pmc_ipc.h | 47 --
> > arch/x86/include/asm/intel_telemetry.h | 1 +
> > drivers/mfd/Kconfig | 16 +-
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/intel_pmc_bxt.c | 504 ++++++++++++++
> > drivers/platform/x86/Kconfig | 16 +-
> > drivers/platform/x86/Makefile | 1 -
> > drivers/platform/x86/intel_pmc_ipc.c | 645 ------------------
> > .../platform/x86/intel_telemetry_debugfs.c | 12 +-
> > drivers/platform/x86/intel_telemetry_pltdrv.c | 2 +
> > drivers/usb/typec/tcpm/Kconfig | 2 +-
> > include/linux/mfd/intel_pmc_bxt.h | 43 ++
> > 13 files changed, 602 insertions(+), 710 deletions(-)
> > create mode 100644 Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
> > delete mode 100644 arch/x86/include/asm/intel_pmc_ipc.h
> > create mode 100644 drivers/mfd/intel_pmc_bxt.c
> > delete mode 100644 drivers/platform/x86/intel_pmc_ipc.c
> > create mode 100644 include/linux/mfd/intel_pmc_bxt.h
>
> [...]
>
> > +/*
> > + * We use the below templates to construct MFD cells. The struct
> > + * intel_pmc_dev instance holds the real MFD cells where we first copy
> > + * these and then fill the dynamic parts based on the extracted resources.
> > + */
> > +
> > +static const struct mfd_cell punit = {
> > + .name = "intel_punit_ipc",
> > +};
> > +
> > +static int update_no_reboot_bit(void *priv, bool set)
> > +{
> > + struct intel_pmc_dev *pmc = priv;
> > + u32 bits = PMC_CFG_NO_REBOOT_EN;
> > + u32 value = set ? bits : 0;
> > +
> > + return intel_pmc_gcr_update(pmc, PMC_GCR_PMC_CFG_REG, bits, value);
> > +}
> > +
> > +static const struct itco_wdt_platform_data tco_pdata = {
> > + .name = "Apollo Lake SoC",
> > + .version = 5,
> > + .update_no_reboot_bit = update_no_reboot_bit,
> > +};
> > +
> > +static const struct mfd_cell tco = {
> > + .name = "iTCO_wdt",
> > + .ignore_resource_conflicts = true,
> > +};
> > +
> > +static const struct resource telem_res[] = {
> > + DEFINE_RES_MEM(TELEM_PUNIT_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
> > + DEFINE_RES_MEM(TELEM_PMC_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
> > +};
> > +
> > +static const struct mfd_cell telem = {
> > + .name = "intel_telemetry",
> > + .resources = telem_res,
> > + .num_resources = ARRAY_SIZE(telem_res),
> > +};
> > +
> > +static int intel_pmc_get_tco_resources(struct platform_device *pdev,
> > + struct intel_pmc_dev *pmc)
> > +{
> > + struct itco_wdt_platform_data *pdata;
> > + struct resource *res, *tco_res;
> > +
> > + if (acpi_has_watchdog())
> > + return 0;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_IO,
> > + PLAT_RESOURCE_ACPI_IO_INDEX);
> > + if (!res) {
> > + dev_err(&pdev->dev, "Failed to get IO resource\n");
> > + return -EINVAL;
> > + }
> > +
> > + tco_res = devm_kcalloc(&pdev->dev, 2, sizeof(*tco_res), GFP_KERNEL);
> > + if (!tco_res)
> > + return -ENOMEM;
> > +
> > + tco_res[0].flags = IORESOURCE_IO;
> > + tco_res[0].start = res->start + TCO_BASE_OFFSET;
> > + tco_res[0].end = tco_res[0].start + TCO_REGS_SIZE - 1;
> > + tco_res[1].flags = IORESOURCE_IO;
> > + tco_res[1].start = res->start + SMI_EN_OFFSET;
> > + tco_res[1].end = tco_res[1].start + SMI_EN_SIZE - 1;
> > +
> > + pmc->cells[PMC_TCO].resources = tco_res;
> > + pmc->cells[PMC_TCO].num_resources = 2;
> > +
> > + pdata = devm_kmemdup(&pdev->dev, &tco_pdata, sizeof(*pdata), GFP_KERNEL);
> > + if (!pdata)
> > + return -ENOMEM;
>
> Why do you need to take a copy?
>
> This can be referenced directly in 'mfd_cell tco', no?
No because I'm filling the priv pointer dynamically. I've tried to
explain the same thing in the previous iterations already.
> > + pdata->no_reboot_priv = pmc;
>
> You're putting device data inside platform data?
>
> This doesn't sit right with me at all.
>
> You already saved it using platform_set_drvdata(), why do you need it
> twice? Why can't you export update_no_reboot_bit() and make it take
> 'struct intel_pmc_dev' or better yet 'pdev' as an argument?
This is a property of the iTCO_wdt driver, not part of this patch
series. I'm just using the interface it provides.
iTCO_wdt interface can of course be made better but I don't think it
should be part of this series.
> > + pmc->cells[PMC_TCO].platform_data = pdata;
> > + pmc->cells[PMC_TCO].pdata_size = sizeof(*pdata);
> > +
> > + return 0;
> > +}
> > +
> > +static int intel_pmc_get_resources(struct platform_device *pdev,
> > + struct intel_pmc_dev *pmc,
> > + struct intel_scu_ipc_data *scu_data)
> > +{
> > + struct resource *res, *punit_res;
> > + struct resource gcr_res;
> > + size_t npunit_res = 0;
> > + int ret;
> > +
> > + scu_data->irq = platform_get_irq_optional(pdev, 0);
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM,
> > + PLAT_RESOURCE_IPC_INDEX);
> > + if (!res) {
> > + dev_err(&pdev->dev, "Failed to get IPC resource\n");
> > + return -EINVAL;
> > + }
> > +
> > + /* IPC registers */
> > + scu_data->mem.flags = res->flags;
> > + scu_data->mem.start = res->start;
> > + scu_data->mem.end = res->start + PLAT_RESOURCE_IPC_SIZE - 1;
> > +
> > + /* GCR registers */
> > + gcr_res.flags = res->flags;
> > + gcr_res.start = res->start + PLAT_RESOURCE_GCR_OFFSET;
> > + gcr_res.end = gcr_res.start + PLAT_RESOURCE_GCR_SIZE - 1;
> > +
> > + pmc->gcr_mem_base = devm_ioremap_resource(&pdev->dev, &gcr_res);
> > + if (IS_ERR(pmc->gcr_mem_base))
> > + return PTR_ERR(pmc->gcr_mem_base);
> > +
> > + pmc->cells[PMC_TCO] = tco;
> > + pmc->cells[PMC_PUNIT] = punit;
> > + pmc->cells[PMC_TELEM] = telem;
>
> Why are you still saving these to device data?
>
> What's stopping you operating on the structures directly?
OK, I've explained this in the previous iterations but here goes. The
problem is that the resources need to be filled dynamically as they are
whatever there is in the ACPI table.
Now, Consider that we have two PMC devices. It is possible that the
driver is bind to both in paraller which means that both are racing to
fill and use these structures leading to a corruption.
Another issue is that even if we have single device, the driver fills in
the structures and then we unbind it. These structures now are left with
that data which does not feel right.
Therefore I've put all we know in advance as const version of these
structures and then we use those as template to build custom ones based
on resources extracted from ACPI to individual instances.
^ permalink raw reply [flat|nested] 28+ messages in thread* Re: [PATCH v8 18/19] platform/x86: intel_pmc_ipc: Convert to MFD
2020-03-24 12:22 ` Mika Westerberg
@ 2020-03-24 14:22 ` Lee Jones
2020-03-24 14:46 ` Mika Westerberg
0 siblings, 1 reply; 28+ messages in thread
From: Lee Jones @ 2020-03-24 14:22 UTC (permalink / raw)
To: Mika Westerberg
Cc: Andy Shevchenko, Darren Hart, Greg Kroah-Hartman, Thomas Gleixner,
Ingo Molnar, Borislav Petkov, H . Peter Anvin, x86, Zha Qipeng,
David E . Box, Guenter Roeck, Heikki Krogerus, Wim Van Sebroeck,
platform-driver-x86, linux-kernel
On Tue, 24 Mar 2020, Mika Westerberg wrote:
> On Tue, Mar 24, 2020 at 11:52:19AM +0000, Lee Jones wrote:
> > On Tue, 03 Mar 2020, Mika Westerberg wrote:
> >
> > > This driver only creates a bunch of platform devices sharing resources
> > > belonging to the PMC device. This is pretty much what MFD subsystem is
> > > for so move the driver there, renaming it to intel_pmc_bxt.c which
> > > should be more clear what it is.
> > >
> > > MFD subsystem provides nice helper APIs for subdevice creation so
> > > convert the driver to use those. Unfortunately the ACPI device includes
> > > separate resources for most of the subdevices so we cannot simply call
> > > mfd_add_devices() to create all of them but instead we need to call it
> > > separately for each device.
> > >
> > > The new MFD driver continues to expose two sysfs attributes that allow
> > > userspace to send IPC commands to the PMC/SCU to avoid breaking any
> > > existing applications that may use these. Generally this is bad idea so
> > > document this in the ABI documentation.
> > >
> > > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> > > Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > > ---
> > > .../ABI/obsolete/sysfs-driver-intel_pmc_bxt | 22 +
> > > arch/x86/include/asm/intel_pmc_ipc.h | 47 --
> > > arch/x86/include/asm/intel_telemetry.h | 1 +
> > > drivers/mfd/Kconfig | 16 +-
> > > drivers/mfd/Makefile | 1 +
> > > drivers/mfd/intel_pmc_bxt.c | 504 ++++++++++++++
> > > drivers/platform/x86/Kconfig | 16 +-
> > > drivers/platform/x86/Makefile | 1 -
> > > drivers/platform/x86/intel_pmc_ipc.c | 645 ------------------
> > > .../platform/x86/intel_telemetry_debugfs.c | 12 +-
> > > drivers/platform/x86/intel_telemetry_pltdrv.c | 2 +
> > > drivers/usb/typec/tcpm/Kconfig | 2 +-
> > > include/linux/mfd/intel_pmc_bxt.h | 43 ++
> > > 13 files changed, 602 insertions(+), 710 deletions(-)
> > > create mode 100644 Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
> > > delete mode 100644 arch/x86/include/asm/intel_pmc_ipc.h
> > > create mode 100644 drivers/mfd/intel_pmc_bxt.c
> > > delete mode 100644 drivers/platform/x86/intel_pmc_ipc.c
> > > create mode 100644 include/linux/mfd/intel_pmc_bxt.h
> >
> > [...]
> >
> > > +/*
> > > + * We use the below templates to construct MFD cells. The struct
> > > + * intel_pmc_dev instance holds the real MFD cells where we first copy
> > > + * these and then fill the dynamic parts based on the extracted resources.
> > > + */
> > > +
> > > +static const struct mfd_cell punit = {
> > > + .name = "intel_punit_ipc",
> > > +};
> > > +
> > > +static int update_no_reboot_bit(void *priv, bool set)
> > > +{
> > > + struct intel_pmc_dev *pmc = priv;
> > > + u32 bits = PMC_CFG_NO_REBOOT_EN;
> > > + u32 value = set ? bits : 0;
> > > +
> > > + return intel_pmc_gcr_update(pmc, PMC_GCR_PMC_CFG_REG, bits, value);
> > > +}
> > > +
> > > +static const struct itco_wdt_platform_data tco_pdata = {
> > > + .name = "Apollo Lake SoC",
> > > + .version = 5,
> > > + .update_no_reboot_bit = update_no_reboot_bit,
> > > +};
> > > +
> > > +static const struct mfd_cell tco = {
> > > + .name = "iTCO_wdt",
> > > + .ignore_resource_conflicts = true,
> > > +};
> > > +
> > > +static const struct resource telem_res[] = {
> > > + DEFINE_RES_MEM(TELEM_PUNIT_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
> > > + DEFINE_RES_MEM(TELEM_PMC_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
> > > +};
> > > +
> > > +static const struct mfd_cell telem = {
> > > + .name = "intel_telemetry",
> > > + .resources = telem_res,
> > > + .num_resources = ARRAY_SIZE(telem_res),
> > > +};
> > > +
> > > +static int intel_pmc_get_tco_resources(struct platform_device *pdev,
> > > + struct intel_pmc_dev *pmc)
> > > +{
> > > + struct itco_wdt_platform_data *pdata;
> > > + struct resource *res, *tco_res;
> > > +
> > > + if (acpi_has_watchdog())
> > > + return 0;
> > > +
> > > + res = platform_get_resource(pdev, IORESOURCE_IO,
> > > + PLAT_RESOURCE_ACPI_IO_INDEX);
> > > + if (!res) {
> > > + dev_err(&pdev->dev, "Failed to get IO resource\n");
> > > + return -EINVAL;
> > > + }
> > > +
> > > + tco_res = devm_kcalloc(&pdev->dev, 2, sizeof(*tco_res), GFP_KERNEL);
> > > + if (!tco_res)
> > > + return -ENOMEM;
> > > +
> > > + tco_res[0].flags = IORESOURCE_IO;
> > > + tco_res[0].start = res->start + TCO_BASE_OFFSET;
> > > + tco_res[0].end = tco_res[0].start + TCO_REGS_SIZE - 1;
> > > + tco_res[1].flags = IORESOURCE_IO;
> > > + tco_res[1].start = res->start + SMI_EN_OFFSET;
> > > + tco_res[1].end = tco_res[1].start + SMI_EN_SIZE - 1;
> > > +
> > > + pmc->cells[PMC_TCO].resources = tco_res;
> > > + pmc->cells[PMC_TCO].num_resources = 2;
> > > +
> > > + pdata = devm_kmemdup(&pdev->dev, &tco_pdata, sizeof(*pdata), GFP_KERNEL);
> > > + if (!pdata)
> > > + return -ENOMEM;
> >
> > Why do you need to take a copy?
> >
> > This can be referenced directly in 'mfd_cell tco', no?
>
> No because I'm filling the priv pointer dynamically. I've tried to
> explain the same thing in the previous iterations already.
You have, and I didn't agree with you then either. ;)
You can add this directly to 'mfd_cell tco' and make the dynamic
changes after the fact. You do not need to be duplicating memory all
over the place.
> > > + pdata->no_reboot_priv = pmc;
> >
> > You're putting device data inside platform data?
> >
> > This doesn't sit right with me at all.
> >
> > You already saved it using platform_set_drvdata(), why do you need it
> > twice? Why can't you export update_no_reboot_bit() and make it take
> > 'struct intel_pmc_dev' or better yet 'pdev' as an argument?
>
> This is a property of the iTCO_wdt driver, not part of this patch
> series. I'm just using the interface it provides.
>
> iTCO_wdt interface can of course be made better but I don't think it
> should be part of this series.
As far as I'm concerned, this is a new driver.
If there is some ugliness, it should be ironed out before being
merged. People have a tendency to lower the priority of fix-ups once
their patches have been merged. I suggest you fix the interface
*first*, rather than as an afterthought.
Since the interface is only between this and the iTCO_wdt driver, this
should be trivial.
> > > + pmc->cells[PMC_TCO].platform_data = pdata;
> > > + pmc->cells[PMC_TCO].pdata_size = sizeof(*pdata);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int intel_pmc_get_resources(struct platform_device *pdev,
> > > + struct intel_pmc_dev *pmc,
> > > + struct intel_scu_ipc_data *scu_data)
> > > +{
> > > + struct resource *res, *punit_res;
> > > + struct resource gcr_res;
> > > + size_t npunit_res = 0;
> > > + int ret;
> > > +
> > > + scu_data->irq = platform_get_irq_optional(pdev, 0);
> > > +
> > > + res = platform_get_resource(pdev, IORESOURCE_MEM,
> > > + PLAT_RESOURCE_IPC_INDEX);
> > > + if (!res) {
> > > + dev_err(&pdev->dev, "Failed to get IPC resource\n");
> > > + return -EINVAL;
> > > + }
> > > +
> > > + /* IPC registers */
> > > + scu_data->mem.flags = res->flags;
> > > + scu_data->mem.start = res->start;
> > > + scu_data->mem.end = res->start + PLAT_RESOURCE_IPC_SIZE - 1;
> > > +
> > > + /* GCR registers */
> > > + gcr_res.flags = res->flags;
> > > + gcr_res.start = res->start + PLAT_RESOURCE_GCR_OFFSET;
> > > + gcr_res.end = gcr_res.start + PLAT_RESOURCE_GCR_SIZE - 1;
> > > +
> > > + pmc->gcr_mem_base = devm_ioremap_resource(&pdev->dev, &gcr_res);
> > > + if (IS_ERR(pmc->gcr_mem_base))
> > > + return PTR_ERR(pmc->gcr_mem_base);
> > > +
> > > + pmc->cells[PMC_TCO] = tco;
> > > + pmc->cells[PMC_PUNIT] = punit;
> > > + pmc->cells[PMC_TELEM] = telem;
> >
> > Why are you still saving these to device data?
> >
> > What's stopping you operating on the structures directly?
>
> OK, I've explained this in the previous iterations but here goes. The
> problem is that the resources need to be filled dynamically as they are
> whatever there is in the ACPI table.
Yep. No problem there.
> Now, Consider that we have two PMC devices. It is possible that the
> driver is bind to both in paraller which means that both are racing to
> fill and use these structures leading to a corruption.
I'm not saying it can't, but please explain to me how this can
happen. There are many instances where multiple identical H/W blocks
occupy a single platform. Please explain why this isn't a problem for
any other device driver.
Besides, if this is a genuine concern, that's the sort of problem
locking was designed to solve.
> Another issue is that even if we have single device, the driver fills in
> the structures and then we unbind it. These structures now are left with
> that data which does not feel right.
What difference does it make if the driver is left with static or
dynamic data? If the driver is not to be rebound, then it doesn't
matter. If it is bound again, the data will just be overwritten in
.probe(). I'm not sure I understand the problem.
> Therefore I've put all we know in advance as const version of these
> structures and then we use those as template to build custom ones based
> on resources extracted from ACPI to individual instances.
I can see that, I just don't agree with it. :)
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 28+ messages in thread* Re: [PATCH v8 18/19] platform/x86: intel_pmc_ipc: Convert to MFD
2020-03-24 14:22 ` Lee Jones
@ 2020-03-24 14:46 ` Mika Westerberg
0 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-24 14:46 UTC (permalink / raw)
To: Lee Jones
Cc: Andy Shevchenko, Darren Hart, Greg Kroah-Hartman, Thomas Gleixner,
Ingo Molnar, Borislav Petkov, H . Peter Anvin, x86, Zha Qipeng,
David E . Box, Guenter Roeck, Heikki Krogerus, Wim Van Sebroeck,
platform-driver-x86, linux-kernel
On Tue, Mar 24, 2020 at 02:22:28PM +0000, Lee Jones wrote:
> On Tue, 24 Mar 2020, Mika Westerberg wrote:
>
> > On Tue, Mar 24, 2020 at 11:52:19AM +0000, Lee Jones wrote:
> > > On Tue, 03 Mar 2020, Mika Westerberg wrote:
> > >
> > > > This driver only creates a bunch of platform devices sharing resources
> > > > belonging to the PMC device. This is pretty much what MFD subsystem is
> > > > for so move the driver there, renaming it to intel_pmc_bxt.c which
> > > > should be more clear what it is.
> > > >
> > > > MFD subsystem provides nice helper APIs for subdevice creation so
> > > > convert the driver to use those. Unfortunately the ACPI device includes
> > > > separate resources for most of the subdevices so we cannot simply call
> > > > mfd_add_devices() to create all of them but instead we need to call it
> > > > separately for each device.
> > > >
> > > > The new MFD driver continues to expose two sysfs attributes that allow
> > > > userspace to send IPC commands to the PMC/SCU to avoid breaking any
> > > > existing applications that may use these. Generally this is bad idea so
> > > > document this in the ABI documentation.
> > > >
> > > > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> > > > Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > > > ---
> > > > .../ABI/obsolete/sysfs-driver-intel_pmc_bxt | 22 +
> > > > arch/x86/include/asm/intel_pmc_ipc.h | 47 --
> > > > arch/x86/include/asm/intel_telemetry.h | 1 +
> > > > drivers/mfd/Kconfig | 16 +-
> > > > drivers/mfd/Makefile | 1 +
> > > > drivers/mfd/intel_pmc_bxt.c | 504 ++++++++++++++
> > > > drivers/platform/x86/Kconfig | 16 +-
> > > > drivers/platform/x86/Makefile | 1 -
> > > > drivers/platform/x86/intel_pmc_ipc.c | 645 ------------------
> > > > .../platform/x86/intel_telemetry_debugfs.c | 12 +-
> > > > drivers/platform/x86/intel_telemetry_pltdrv.c | 2 +
> > > > drivers/usb/typec/tcpm/Kconfig | 2 +-
> > > > include/linux/mfd/intel_pmc_bxt.h | 43 ++
> > > > 13 files changed, 602 insertions(+), 710 deletions(-)
> > > > create mode 100644 Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
> > > > delete mode 100644 arch/x86/include/asm/intel_pmc_ipc.h
> > > > create mode 100644 drivers/mfd/intel_pmc_bxt.c
> > > > delete mode 100644 drivers/platform/x86/intel_pmc_ipc.c
> > > > create mode 100644 include/linux/mfd/intel_pmc_bxt.h
> > >
> > > [...]
> > >
> > > > +/*
> > > > + * We use the below templates to construct MFD cells. The struct
> > > > + * intel_pmc_dev instance holds the real MFD cells where we first copy
> > > > + * these and then fill the dynamic parts based on the extracted resources.
> > > > + */
> > > > +
> > > > +static const struct mfd_cell punit = {
> > > > + .name = "intel_punit_ipc",
> > > > +};
> > > > +
> > > > +static int update_no_reboot_bit(void *priv, bool set)
> > > > +{
> > > > + struct intel_pmc_dev *pmc = priv;
> > > > + u32 bits = PMC_CFG_NO_REBOOT_EN;
> > > > + u32 value = set ? bits : 0;
> > > > +
> > > > + return intel_pmc_gcr_update(pmc, PMC_GCR_PMC_CFG_REG, bits, value);
> > > > +}
> > > > +
> > > > +static const struct itco_wdt_platform_data tco_pdata = {
> > > > + .name = "Apollo Lake SoC",
> > > > + .version = 5,
> > > > + .update_no_reboot_bit = update_no_reboot_bit,
> > > > +};
> > > > +
> > > > +static const struct mfd_cell tco = {
> > > > + .name = "iTCO_wdt",
> > > > + .ignore_resource_conflicts = true,
> > > > +};
> > > > +
> > > > +static const struct resource telem_res[] = {
> > > > + DEFINE_RES_MEM(TELEM_PUNIT_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
> > > > + DEFINE_RES_MEM(TELEM_PMC_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
> > > > +};
> > > > +
> > > > +static const struct mfd_cell telem = {
> > > > + .name = "intel_telemetry",
> > > > + .resources = telem_res,
> > > > + .num_resources = ARRAY_SIZE(telem_res),
> > > > +};
> > > > +
> > > > +static int intel_pmc_get_tco_resources(struct platform_device *pdev,
> > > > + struct intel_pmc_dev *pmc)
> > > > +{
> > > > + struct itco_wdt_platform_data *pdata;
> > > > + struct resource *res, *tco_res;
> > > > +
> > > > + if (acpi_has_watchdog())
> > > > + return 0;
> > > > +
> > > > + res = platform_get_resource(pdev, IORESOURCE_IO,
> > > > + PLAT_RESOURCE_ACPI_IO_INDEX);
> > > > + if (!res) {
> > > > + dev_err(&pdev->dev, "Failed to get IO resource\n");
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > + tco_res = devm_kcalloc(&pdev->dev, 2, sizeof(*tco_res), GFP_KERNEL);
> > > > + if (!tco_res)
> > > > + return -ENOMEM;
> > > > +
> > > > + tco_res[0].flags = IORESOURCE_IO;
> > > > + tco_res[0].start = res->start + TCO_BASE_OFFSET;
> > > > + tco_res[0].end = tco_res[0].start + TCO_REGS_SIZE - 1;
> > > > + tco_res[1].flags = IORESOURCE_IO;
> > > > + tco_res[1].start = res->start + SMI_EN_OFFSET;
> > > > + tco_res[1].end = tco_res[1].start + SMI_EN_SIZE - 1;
> > > > +
> > > > + pmc->cells[PMC_TCO].resources = tco_res;
> > > > + pmc->cells[PMC_TCO].num_resources = 2;
> > > > +
> > > > + pdata = devm_kmemdup(&pdev->dev, &tco_pdata, sizeof(*pdata), GFP_KERNEL);
> > > > + if (!pdata)
> > > > + return -ENOMEM;
> > >
> > > Why do you need to take a copy?
> > >
> > > This can be referenced directly in 'mfd_cell tco', no?
> >
> > No because I'm filling the priv pointer dynamically. I've tried to
> > explain the same thing in the previous iterations already.
>
> You have, and I didn't agree with you then either. ;)
>
> You can add this directly to 'mfd_cell tco' and make the dynamic
> changes after the fact. You do not need to be duplicating memory all
> over the place.
Well fine I don't want to argue about this. You are the maintainer.
> > > > + pdata->no_reboot_priv = pmc;
> > >
> > > You're putting device data inside platform data?
> > >
> > > This doesn't sit right with me at all.
> > >
> > > You already saved it using platform_set_drvdata(), why do you need it
> > > twice? Why can't you export update_no_reboot_bit() and make it take
> > > 'struct intel_pmc_dev' or better yet 'pdev' as an argument?
> >
> > This is a property of the iTCO_wdt driver, not part of this patch
> > series. I'm just using the interface it provides.
> >
> > iTCO_wdt interface can of course be made better but I don't think it
> > should be part of this series.
>
> As far as I'm concerned, this is a new driver.
>
> If there is some ugliness, it should be ironed out before being
> merged. People have a tendency to lower the priority of fix-ups once
> their patches have been merged. I suggest you fix the interface
> *first*, rather than as an afterthought.
>
> Since the interface is only between this and the iTCO_wdt driver, this
> should be trivial.
OK
> > > > + pmc->cells[PMC_TCO].platform_data = pdata;
> > > > + pmc->cells[PMC_TCO].pdata_size = sizeof(*pdata);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int intel_pmc_get_resources(struct platform_device *pdev,
> > > > + struct intel_pmc_dev *pmc,
> > > > + struct intel_scu_ipc_data *scu_data)
> > > > +{
> > > > + struct resource *res, *punit_res;
> > > > + struct resource gcr_res;
> > > > + size_t npunit_res = 0;
> > > > + int ret;
> > > > +
> > > > + scu_data->irq = platform_get_irq_optional(pdev, 0);
> > > > +
> > > > + res = platform_get_resource(pdev, IORESOURCE_MEM,
> > > > + PLAT_RESOURCE_IPC_INDEX);
> > > > + if (!res) {
> > > > + dev_err(&pdev->dev, "Failed to get IPC resource\n");
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > + /* IPC registers */
> > > > + scu_data->mem.flags = res->flags;
> > > > + scu_data->mem.start = res->start;
> > > > + scu_data->mem.end = res->start + PLAT_RESOURCE_IPC_SIZE - 1;
> > > > +
> > > > + /* GCR registers */
> > > > + gcr_res.flags = res->flags;
> > > > + gcr_res.start = res->start + PLAT_RESOURCE_GCR_OFFSET;
> > > > + gcr_res.end = gcr_res.start + PLAT_RESOURCE_GCR_SIZE - 1;
> > > > +
> > > > + pmc->gcr_mem_base = devm_ioremap_resource(&pdev->dev, &gcr_res);
> > > > + if (IS_ERR(pmc->gcr_mem_base))
> > > > + return PTR_ERR(pmc->gcr_mem_base);
> > > > +
> > > > + pmc->cells[PMC_TCO] = tco;
> > > > + pmc->cells[PMC_PUNIT] = punit;
> > > > + pmc->cells[PMC_TELEM] = telem;
> > >
> > > Why are you still saving these to device data?
> > >
> > > What's stopping you operating on the structures directly?
> >
> > OK, I've explained this in the previous iterations but here goes. The
> > problem is that the resources need to be filled dynamically as they are
> > whatever there is in the ACPI table.
>
> Yep. No problem there.
>
> > Now, Consider that we have two PMC devices. It is possible that the
> > driver is bind to both in paraller which means that both are racing to
> > fill and use these structures leading to a corruption.
>
> I'm not saying it can't, but please explain to me how this can
> happen. There are many instances where multiple identical H/W blocks
> occupy a single platform. Please explain why this isn't a problem for
> any other device driver.
Any other device driver either uses per instance data or they don't need
to fill in the resources dynamically after extracting them from the
firmware description.
> Besides, if this is a genuine concern, that's the sort of problem
> locking was designed to solve.
Well that would end up even uglier solution than simply taking a copy.
> > Another issue is that even if we have single device, the driver fills in
> > the structures and then we unbind it. These structures now are left with
> > that data which does not feel right.
>
> What difference does it make if the driver is left with static or
> dynamic data? If the driver is not to be rebound, then it doesn't
> matter. If it is bound again, the data will just be overwritten in
> .probe(). I'm not sure I understand the problem.
>
> > Therefore I've put all we know in advance as const version of these
> > structures and then we use those as template to build custom ones based
> > on resources extracted from ACPI to individual instances.
>
> I can see that, I just don't agree with it. :)
Fair enough. I'll do these changes in v9.
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v8 19/19] MAINTAINERS: Update entry for Intel Broxton PMC driver
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (17 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 18/19] platform/x86: intel_pmc_ipc: Convert to MFD Mika Westerberg
@ 2020-03-03 13:36 ` Mika Westerberg
2020-03-17 8:43 ` [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-03 13:36 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, Mika Westerberg, platform-driver-x86,
linux-kernel
The driver lives now under MFD so split the current entry into two parts
and add me as co-maintainer of the Intel Broxton PMC driver. While there
correct formatting of Zha Qipeng's email address.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
MAINTAINERS | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 4d4e3241bf99..20e4353260f7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8371,6 +8371,13 @@ L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/intel_atomisp2_pm.c
+INTEL BROXTON PMC DRIVER
+M: Mika Westerberg <mika.westerberg@linux.intel.com>
+M: Zha Qipeng <qipeng.zha@intel.com>
+S: Maintained
+F: drivers/mfd/intel_pmc_bxt.c
+F: include/linux/mfd/intel_pmc_bxt.h
+
INTEL C600 SERIES SAS CONTROLLER DRIVER
M: Intel SCU Linux support <intel-linux-scu@intel.com>
M: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
@@ -8579,6 +8586,13 @@ F: drivers/dma/mic_x100_dma.c
F: drivers/dma/mic_x100_dma.h
F: Documentation/mic/
+INTEL P-Unit IPC DRIVER
+M: Zha Qipeng <qipeng.zha@intel.com>
+L: platform-driver-x86@vger.kernel.org
+S: Maintained
+F: arch/x86/include/asm/intel_punit_ipc.h
+F: drivers/platform/x86/intel_punit_ipc.c
+
INTEL PMC CORE DRIVER
M: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
M: Vishwanath Somayaji <vishwanath.somayaji@intel.com>
@@ -8586,15 +8600,6 @@ L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/intel_pmc_core*
-INTEL PMC/P-Unit IPC DRIVER
-M: Zha Qipeng<qipeng.zha@intel.com>
-L: platform-driver-x86@vger.kernel.org
-S: Maintained
-F: arch/x86/include/asm/intel_pmc_ipc.h
-F: arch/x86/include/asm/intel_punit_ipc.h
-F: drivers/platform/x86/intel_pmc_ipc.c
-F: drivers/platform/x86/intel_punit_ipc.c
-
INTEL PMIC GPIO DRIVERS
M: Andy Shevchenko <andy@kernel.org>
S: Maintained
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* Re: [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers
2020-03-03 13:36 [PATCH v8 00/19] platform/x86: Rework intel_scu_ipc and intel_pmc_ipc drivers Mika Westerberg
` (18 preceding siblings ...)
2020-03-03 13:36 ` [PATCH v8 19/19] MAINTAINERS: Update entry for Intel Broxton PMC driver Mika Westerberg
@ 2020-03-17 8:43 ` Mika Westerberg
19 siblings, 0 replies; 28+ messages in thread
From: Mika Westerberg @ 2020-03-17 8:43 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Lee Jones, Greg Kroah-Hartman
Cc: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H . Peter Anvin,
x86, Zha Qipeng, David E . Box, Guenter Roeck, Heikki Krogerus,
Wim Van Sebroeck, platform-driver-x86, linux-kernel
Hi all,
On Tue, Mar 03, 2020 at 04:36:30PM +0300, Mika Westerberg wrote:
> Currently both intel_scu_ipc.c and intel_pmc_ipc.c implement the same SCU
> IPC communications with minor differences. This duplication does not make
> much sense so this series reworks the two drivers so that there is only a
> single implementation of the SCU IPC. In addition to that the API will be
> updated to take SCU instance pointer as an argument, and most of the
> callers will be converted to this new API. The old API is left there but
> the plan is to get rid the callers and then the old API as well (this is
> something we are working with Andy Shevchenko).
>
> The intel_pmc_ipc.c is then moved under MFD which suits better for this
> kind of a driver that pretty much sets up the SCU IPC and then creates a
> bunch of platform devices for the things sitting behind the PMC. The driver
> is renamed to intel_pmc_bxt.c which should follow the existing conventions
> under drivers/mfd (and it is only meant for Intel Broxton derivatives).
>
> This series is on top of platform-driver-x86.git/for-next because there are
> a couple of commits in that branch that re-organize the Kconfig and
> Makefile of drivers/platform/x86. So these do not apply cleanly without
> those commits. For this reason I would prefer this to go through pdx86 tree
> if there are no objections.
If there are no objections it would be nice to get this series merged for v5.7.
Thanks!
^ permalink raw reply [flat|nested] 28+ messages in thread