From: Julien Thierry <jthierry@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: jpoimboe@redhat.com, peterz@infradead.org, raphael.gault@arm.com,
Julien Thierry <jthierry@redhat.com>
Subject: [PATCH v2 08/10] objtool: Add abstraction for computation of symbols offsets
Date: Fri, 27 Mar 2020 15:28:45 +0000 [thread overview]
Message-ID: <20200327152847.15294-9-jthierry@redhat.com> (raw)
In-Reply-To: <20200327152847.15294-1-jthierry@redhat.com>
From: Raphael Gault <raphael.gault@arm.com>
The jump destination and relocation offset used previously are only
reliable on x86_64 architecture. We abstract these computations by calling
arch-dependent implementations.
Signed-off-by: Raphael Gault <raphael.gault@arm.com>
[J.T. Remove superfluous comment, replace other addend offsets
with arch_dest_rela_offset]
Signed-off-by: Julien Thierry <jthierry@redhat.com>
---
tools/objtool/arch.h | 6 ++++++
tools/objtool/arch/x86/decode.c | 11 +++++++++++
tools/objtool/check.c | 18 ++++++++++--------
3 files changed, 27 insertions(+), 8 deletions(-)
diff --git a/tools/objtool/arch.h b/tools/objtool/arch.h
index ced3765c4f44..a9a50a25ca66 100644
--- a/tools/objtool/arch.h
+++ b/tools/objtool/arch.h
@@ -66,6 +66,8 @@ struct stack_op {
struct op_src src;
};
+struct instruction;
+
void arch_initial_func_cfi_state(struct cfi_state *state);
int arch_decode_instruction(struct elf *elf, struct section *sec,
@@ -75,4 +77,8 @@ int arch_decode_instruction(struct elf *elf, struct section *sec,
bool arch_callee_saved_reg(unsigned char reg);
+unsigned long arch_jump_destination(struct instruction *insn);
+
+unsigned long arch_dest_rela_offset(int addend);
+
#endif /* _ARCH_H */
diff --git a/tools/objtool/arch/x86/decode.c b/tools/objtool/arch/x86/decode.c
index a62e032863a8..7ce8650cf085 100644
--- a/tools/objtool/arch/x86/decode.c
+++ b/tools/objtool/arch/x86/decode.c
@@ -11,6 +11,7 @@
#include "../../../arch/x86/lib/inat.c"
#include "../../../arch/x86/lib/insn.c"
+#include "../../check.h"
#include "../../elf.h"
#include "../../arch.h"
#include "../../warn.h"
@@ -66,6 +67,16 @@ bool arch_callee_saved_reg(unsigned char reg)
}
}
+unsigned long arch_dest_rela_offset(int addend)
+{
+ return addend + 4;
+}
+
+unsigned long arch_jump_destination(struct instruction *insn)
+{
+ return insn->offset + insn->len + insn->immediate;
+}
+
int arch_decode_instruction(struct elf *elf, struct section *sec,
unsigned long offset, unsigned int maxlen,
unsigned int *len, enum insn_type *type,
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index fb1ddde66b48..dbfd1f5d06f7 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -577,13 +577,14 @@ static int add_jump_destinations(struct objtool_file *file)
insn->offset, insn->len);
if (!rela) {
dest_sec = insn->sec;
- dest_off = insn->offset + insn->len + insn->immediate;
+ dest_off = arch_jump_destination(insn);
} else if (rela->sym->type == STT_SECTION) {
dest_sec = rela->sym->sec;
- dest_off = rela->addend + 4;
+ dest_off = arch_dest_rela_offset(rela->addend);
} else if (rela->sym->sec->idx) {
dest_sec = rela->sym->sec;
- dest_off = rela->sym->sym.st_value + rela->addend + 4;
+ dest_off = rela->sym->sym.st_value +
+ arch_dest_rela_offset(rela->addend);
} else if (strstr(rela->sym->name, "_indirect_thunk_")) {
/*
* Retpoline jumps are really dynamic jumps in
@@ -673,7 +674,7 @@ static int add_call_destinations(struct objtool_file *file)
rela = find_rela_by_dest_range(file->elf, insn->sec,
insn->offset, insn->len);
if (!rela) {
- dest_off = insn->offset + insn->len + insn->immediate;
+ dest_off = arch_jump_destination(insn);
insn->call_dest = find_func_by_offset(insn->sec, dest_off);
if (!insn->call_dest)
insn->call_dest = find_symbol_by_offset(insn->sec, dest_off);
@@ -696,13 +697,14 @@ static int add_call_destinations(struct objtool_file *file)
}
} else if (rela->sym->type == STT_SECTION) {
+ dest_off = arch_dest_rela_offset(rela->addend);
insn->call_dest = find_func_by_offset(rela->sym->sec,
- rela->addend+4);
+ dest_off);
if (!insn->call_dest) {
- WARN_FUNC("can't find call dest symbol at %s+0x%x",
+ WARN_FUNC("can't find call dest symbol at %s+0x%lx",
insn->sec, insn->offset,
rela->sym->sec->name,
- rela->addend + 4);
+ dest_off);
return -1;
}
} else
@@ -814,7 +816,7 @@ static int handle_group_alt(struct objtool_file *file,
if (!insn->immediate)
continue;
- dest_off = insn->offset + insn->len + insn->immediate;
+ dest_off = arch_jump_destination(insn);
if (dest_off == special_alt->new_off + special_alt->new_len) {
if (!fake_jump) {
WARN("%s: alternative jump to end of section",
--
2.21.1
next prev parent reply other threads:[~2020-03-27 15:29 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-27 15:28 [PATCH v2 00/10] Objtool updates for easier portability Julien Thierry
2020-03-27 15:28 ` [PATCH v2 01/10] objtool: Move header sync-check ealier in build Julien Thierry
2020-04-01 12:32 ` Miroslav Benes
2020-04-01 12:44 ` Julien Thierry
2020-04-01 12:55 ` Miroslav Benes
2020-04-02 17:12 ` Josh Poimboeuf
2020-04-02 17:17 ` Josh Poimboeuf
2020-03-27 15:28 ` [PATCH v2 02/10] objtool: check: Remove redundant checks on operand type Julien Thierry
2020-03-27 15:28 ` [PATCH v2 03/10] objtool: check: Clean instruction state before each function validation Julien Thierry
2020-03-27 15:28 ` [PATCH v2 04/10] objtool: check: Ignore empty alternative groups Julien Thierry
2020-04-01 12:53 ` Miroslav Benes
2020-04-01 13:43 ` Julien Thierry
2020-04-01 13:48 ` Miroslav Benes
2020-03-27 15:28 ` [PATCH v2 05/10] objtool: check: Remove check preventing branches within alternative Julien Thierry
2020-05-01 18:22 ` [tip: objtool/core] objtool: " tip-bot2 for Julien Thierry
2020-03-27 15:28 ` [PATCH v2 06/10] objtool: check: Use arch specific values in restore_reg() Julien Thierry
2020-03-27 15:28 ` [PATCH v2 07/10] objtool: check: Allow save/restore hint in non standard function symbols Julien Thierry
2020-04-01 13:54 ` Miroslav Benes
2020-04-01 14:06 ` Julien Thierry
2020-03-27 15:28 ` Julien Thierry [this message]
2020-03-27 15:28 ` [PATCH v2 09/10] objtool: Split generic and arch specific CFI definitions Julien Thierry
2020-03-27 15:28 ` [PATCH v2 10/10] objtool: Support multiple stack_op per instruction Julien Thierry
2020-04-02 17:54 ` Josh Poimboeuf
2020-04-02 18:25 ` Peter Zijlstra
2020-04-03 8:01 ` Julien Thierry
2020-04-03 14:55 ` Josh Poimboeuf
2020-04-22 22:24 ` [tip: objtool/core] " tip-bot2 for Julien Thierry
2020-04-23 7:49 ` tip-bot2 for Julien Thierry
2020-04-23 11:15 ` Peter Zijlstra
2020-04-02 17:58 ` [PATCH v2 00/10] Objtool updates for easier portability Josh Poimboeuf
2020-04-02 18:30 ` Peter Zijlstra
2020-04-03 7:17 ` Miroslav Benes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200327152847.15294-9-jthierry@redhat.com \
--to=jthierry@redhat.com \
--cc=jpoimboe@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=raphael.gault@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox