public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Tingwei Zhang <tingwei@codeaurora.org>
To: Will Deacon <will@kernel.org>, Mark Rutland <mark.rutland@arm.com>
Cc: Tingwei Zhang <tingwei@codeaurora.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: hw_breakpoint: don't clear debug registers in halt mode
Date: Sat, 28 Mar 2020 16:32:09 +0800	[thread overview]
Message-ID: <20200328083209.21793-1-tingwei@codeaurora.org> (raw)

If external debugger sets a breakpoint for one Kernel function
when device is in bootloader mode and loads Kernel, this breakpoint
will be wiped out in hw_breakpoint_reset(). To fix this, check
MDSCR_EL1.HDE in hw_breakpoint_reset(). When MDSCR_EL1.HDE is
0b1, halting debug is enabled. Don't reset debug registers in this case.

Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
---
 arch/arm64/include/asm/debug-monitors.h |  1 +
 arch/arm64/kernel/hw_breakpoint.c       | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h
index 7619f473155f..8dc2c28791a0 100644
--- a/arch/arm64/include/asm/debug-monitors.h
+++ b/arch/arm64/include/asm/debug-monitors.h
@@ -18,6 +18,7 @@
 
 /* MDSCR_EL1 enabling bits */
 #define DBG_MDSCR_KDE		(1 << 13)
+#define DBG_MDSCR_HDE		(1 << 14)
 #define DBG_MDSCR_MDE		(1 << 15)
 #define DBG_MDSCR_MASK		~(DBG_MDSCR_KDE | DBG_MDSCR_MDE)
 
diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c
index 0b727edf4104..0180306f74d7 100644
--- a/arch/arm64/kernel/hw_breakpoint.c
+++ b/arch/arm64/kernel/hw_breakpoint.c
@@ -927,6 +927,17 @@ void hw_breakpoint_thread_switch(struct task_struct *next)
 				    !next_debug_info->wps_disabled);
 }
 
+/*
+ * Check if halted debug mode is enabled.
+ */
+static u32 hde_enabled(void)
+{
+	u32 mdscr;
+
+	asm volatile("mrs %0, mdscr_el1" : "=r" (mdscr));
+	return (mdscr & DBG_MDSCR_HDE);
+}
+
 /*
  * CPU initialisation.
  */
@@ -934,6 +945,14 @@ static int hw_breakpoint_reset(unsigned int cpu)
 {
 	int i;
 	struct perf_event **slots;
+
+	/*
+	 * When halting debug mode is enabled, break point could be already
+	 * set be external debugger. Don't reset debug registers here to
+	 * reserve break point from external debugger.
+	 */
+	if (hde_enabled())
+		return 0;
 	/*
 	 * When a CPU goes through cold-boot, it does not have any installed
 	 * slot, so it is safe to share the same function for restoring and
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

             reply	other threads:[~2020-03-28  8:32 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-28  8:32 Tingwei Zhang [this message]
2020-03-30 12:39 ` [PATCH] arm64: hw_breakpoint: don't clear debug registers in halt mode Mark Rutland
2020-03-30 13:42   ` Will Deacon
2020-03-31  2:39     ` tingwei
2020-03-31  7:41       ` Will Deacon
2020-03-31 11:33         ` tingwei
2020-03-31 11:45           ` Will Deacon
2020-04-21  3:49             ` tingwei
2020-04-21  7:10               ` Will Deacon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200328083209.21793-1-tingwei@codeaurora.org \
    --to=tingwei@codeaurora.org \
    --cc=catalin.marinas@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox