From: Ankur Arora <ankur.a.arora@oracle.com>
To: linux-kernel@vger.kernel.org, x86@kernel.org
Cc: peterz@infradead.org, hpa@zytor.com, jpoimboe@redhat.com,
namit@vmware.com, mhiramat@kernel.org, jgross@suse.com,
bp@alien8.de, vkuznets@redhat.com, pbonzini@redhat.com,
boris.ostrovsky@oracle.com, mihai.carabas@oracle.com,
kvm@vger.kernel.org, xen-devel@lists.xenproject.org,
virtualization@lists.linux-foundation.org,
Ankur Arora <ankur.a.arora@oracle.com>
Subject: [RFC PATCH 13/26] x86/alternatives: Split __text_poke()
Date: Tue, 7 Apr 2020 22:03:10 -0700 [thread overview]
Message-ID: <20200408050323.4237-14-ankur.a.arora@oracle.com> (raw)
In-Reply-To: <20200408050323.4237-1-ankur.a.arora@oracle.com>
Separate __text_poke() into map, memcpy and unmap portions,
(__text_poke_map(), __text_do_poke() and __text_poke_unmap().)
Do this to separate the non-reentrant bits from the reentrant
__text_do_poke(). __text_poke_map()/_unmap() modify poking_mm,
poking_addr and do the pte-mapping and thus are non-reentrant.
This allows __text_do_poke() to be safely called from an INT3
context with __text_poke_map()/_unmap() being called at the
start and the end of the patching of a call-site instead of
doing that for each stage of the three patching stages.
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
---
arch/x86/kernel/alternative.c | 46 +++++++++++++++++++++++++----------
1 file changed, 33 insertions(+), 13 deletions(-)
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 0344e49a4ade..337aad8c2521 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -805,13 +805,12 @@ void __init_or_module text_poke_early(void *addr, const void *opcode,
__ro_after_init struct mm_struct *poking_mm;
__ro_after_init unsigned long poking_addr;
-static void __text_poke(void *addr, const void *opcode, size_t len)
+static void __text_poke_map(void *addr, size_t len,
+ temp_mm_state_t *prev_mm, pte_t **ptep)
{
bool cross_page_boundary = offset_in_page(addr) + len > PAGE_SIZE;
struct page *pages[2] = {NULL};
- temp_mm_state_t prev;
- unsigned long flags;
- pte_t pte, *ptep;
+ pte_t pte;
pgprot_t pgprot;
/*
@@ -836,8 +835,6 @@ static void __text_poke(void *addr, const void *opcode, size_t len)
*/
BUG_ON(!pages[0] || (cross_page_boundary && !pages[1]));
- local_irq_save(flags);
-
/*
* Map the page without the global bit, as TLB flushing is done with
* flush_tlb_mm_range(), which is intended for non-global PTEs.
@@ -849,30 +846,42 @@ static void __text_poke(void *addr, const void *opcode, size_t len)
* unlocked. This does mean that we need to be careful that no other
* context (ex. INT3 handler) is simultaneously writing to this pte.
*/
- ptep = __get_unlocked_pte(poking_mm, poking_addr);
+ *ptep = __get_unlocked_pte(poking_mm, poking_addr);
/*
* This must not fail; preallocated in poking_init().
*/
- VM_BUG_ON(!ptep);
+ VM_BUG_ON(!*ptep);
pte = mk_pte(pages[0], pgprot);
- set_pte_at(poking_mm, poking_addr, ptep, pte);
+ set_pte_at(poking_mm, poking_addr, *ptep, pte);
if (cross_page_boundary) {
pte = mk_pte(pages[1], pgprot);
- set_pte_at(poking_mm, poking_addr + PAGE_SIZE, ptep + 1, pte);
+ set_pte_at(poking_mm, poking_addr + PAGE_SIZE, *ptep + 1, pte);
}
/*
* Loading the temporary mm behaves as a compiler barrier, which
* guarantees that the PTE will be set at the time memcpy() is done.
*/
- prev = use_temporary_mm(poking_mm);
+ *prev_mm = use_temporary_mm(poking_mm);
+}
+/*
+ * Do the actual poke. Needs to be re-entrant as this can be called
+ * via INT3 context as well.
+ */
+static void __text_do_poke(unsigned long offset, const void *opcode, size_t len)
+{
kasan_disable_current();
- memcpy((u8 *)poking_addr + offset_in_page(addr), opcode, len);
+ memcpy((u8 *)poking_addr + offset, opcode, len);
kasan_enable_current();
+}
+static void __text_poke_unmap(void *addr, const void *opcode, size_t len,
+ temp_mm_state_t *prev_mm, pte_t *ptep)
+{
+ bool cross_page_boundary = offset_in_page(addr) + len > PAGE_SIZE;
/*
* Ensure that the PTE is only cleared after the instructions of memcpy
* were issued by using a compiler barrier.
@@ -888,7 +897,7 @@ static void __text_poke(void *addr, const void *opcode, size_t len)
* instruction that already allows the core to see the updated version.
* Xen-PV is assumed to serialize execution in a similar manner.
*/
- unuse_temporary_mm(prev);
+ unuse_temporary_mm(*prev_mm);
/*
* Flushing the TLB might involve IPIs, which would require enabled
@@ -903,7 +912,18 @@ static void __text_poke(void *addr, const void *opcode, size_t len)
* fundamentally screwy; there's nothing we can really do about that.
*/
BUG_ON(memcmp(addr, opcode, len));
+}
+static void __text_poke(void *addr, const void *opcode, size_t len)
+{
+ temp_mm_state_t prev_mm;
+ unsigned long flags;
+ pte_t *ptep;
+
+ local_irq_save(flags);
+ __text_poke_map(addr, len, &prev_mm, &ptep);
+ __text_do_poke(offset_in_page(addr), opcode, len);
+ __text_poke_unmap(addr, opcode, len, &prev_mm, ptep);
local_irq_restore(flags);
}
--
2.20.1
next prev parent reply other threads:[~2020-04-08 5:07 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-08 5:02 [RFC PATCH 00/26] Runtime paravirt patching Ankur Arora
2020-04-08 5:02 ` [RFC PATCH 01/26] x86/paravirt: Specify subsection in PVOP macros Ankur Arora
2020-04-08 5:02 ` [RFC PATCH 02/26] x86/paravirt: Allow paravirt patching post-init Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 03/26] x86/paravirt: PVRTOP macros for PARAVIRT_RUNTIME Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 04/26] x86/alternatives: Refactor alternatives_smp_module* Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 05/26] x86/alternatives: Rename alternatives_smp*, smp_alt_module Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 06/26] x86/alternatives: Remove stale symbols Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 07/26] x86/paravirt: Persist .parainstructions.runtime Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 08/26] x86/paravirt: Stash native pv-ops Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 09/26] x86/paravirt: Add runtime_patch() Ankur Arora
2020-04-08 11:05 ` Peter Zijlstra
2020-04-08 5:03 ` [RFC PATCH 10/26] x86/paravirt: Add primitives to stage pv-ops Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 11/26] x86/alternatives: Remove return value of text_poke*() Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 12/26] x86/alternatives: Use __get_unlocked_pte() in text_poke() Ankur Arora
2020-04-08 5:03 ` Ankur Arora [this message]
2020-04-08 5:03 ` [RFC PATCH 14/26] x86/alternatives: Handle native insns in text_poke_loc*() Ankur Arora
2020-04-08 11:11 ` Peter Zijlstra
2020-04-08 11:17 ` Peter Zijlstra
2020-04-08 5:03 ` [RFC PATCH 15/26] x86/alternatives: Non-emulated text poking Ankur Arora
2020-04-08 11:13 ` Peter Zijlstra
2020-04-08 11:23 ` Peter Zijlstra
2020-04-08 5:03 ` [RFC PATCH 16/26] x86/alternatives: Add paravirt patching at runtime Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 17/26] x86/alternatives: Add patching logic in text_poke_site() Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 18/26] x86/alternatives: Handle BP in non-emulated text poking Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 19/26] x86/alternatives: NMI safe runtime patching Ankur Arora
2020-04-08 11:36 ` Peter Zijlstra
2020-04-08 5:03 ` [RFC PATCH 20/26] x86/paravirt: Enable pv-spinlocks in runtime_patch() Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 21/26] x86/alternatives: Paravirt runtime selftest Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 22/26] kvm/paravirt: Encapsulate KVM pv switching logic Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 23/26] x86/kvm: Add worker to trigger runtime patching Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 24/26] x86/kvm: Support dynamic CPUID hints Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 25/26] x86/kvm: Guest support for dynamic hints Ankur Arora
2020-04-08 5:03 ` [RFC PATCH 26/26] x86/kvm: Add hint change notifier for KVM_HINT_REALTIME Ankur Arora
2020-04-08 12:08 ` [RFC PATCH 00/26] Runtime paravirt patching Peter Zijlstra
2020-04-08 13:33 ` Jürgen Groß
2020-04-08 14:49 ` Peter Zijlstra
2020-04-10 9:18 ` Ankur Arora
2020-04-08 12:28 ` Jürgen Groß
2020-04-10 7:56 ` Ankur Arora
2020-04-10 9:32 ` Ankur Arora
2020-04-08 14:12 ` Thomas Gleixner
2020-04-10 9:55 ` Ankur Arora
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200408050323.4237-14-ankur.a.arora@oracle.com \
--to=ankur.a.arora@oracle.com \
--cc=boris.ostrovsky@oracle.com \
--cc=bp@alien8.de \
--cc=hpa@zytor.com \
--cc=jgross@suse.com \
--cc=jpoimboe@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mhiramat@kernel.org \
--cc=mihai.carabas@oracle.com \
--cc=namit@vmware.com \
--cc=pbonzini@redhat.com \
--cc=peterz@infradead.org \
--cc=virtualization@lists.linux-foundation.org \
--cc=vkuznets@redhat.com \
--cc=x86@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox