* Arm CryptoCell driver -- default Y, even on machines where it is obviously useless @ 2020-04-18 10:43 Pavel Machek 2020-04-18 20:31 ` Hadar Gat 0 siblings, 1 reply; 9+ messages in thread From: Pavel Machek @ 2020-04-18 10:43 UTC (permalink / raw) To: kernel list, hadar.gat, herbert [-- Attachment #1: Type: text/plain, Size: 352 bytes --] Hi! I'm configuring kernel for x86, and I get offered HW_RANDOM_CCTRNG with default=Y, and help text suggesting I should enable it. That's... two wrong suggestions, right? Best regards, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 181 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: Arm CryptoCell driver -- default Y, even on machines where it is obviously useless 2020-04-18 10:43 Arm CryptoCell driver -- default Y, even on machines where it is obviously useless Pavel Machek @ 2020-04-18 20:31 ` Hadar Gat [not found] ` <VI1PR08MB3584451F0B0B21E00ACF56A7FED70@VI1PR08MB3584.eurprd08.prod.outlook.com> 2020-04-25 21:18 ` Pavel Machek 0 siblings, 2 replies; 9+ messages in thread From: Hadar Gat @ 2020-04-18 20:31 UTC (permalink / raw) To: Pavel Machek, kernel list, herbert@gondor.apana.org.au Cc: Ofir Drang, Gilad Ben Yossef, nd Hi Pavel, I think you got it right.. Indeed, Arm CryptoCell CCTRNG driver couldn't be used and obviously useless if the Arm CryptoCell HW does not exist in the system. BR, Hadar > -----Original Message----- > From: Pavel Machek <pavel@ucw.cz> > Sent: Saturday, 18 April 2020 13:44 > To: kernel list <linux-kernel@vger.kernel.org>; Hadar Gat > <Hadar.Gat@arm.com>; herbert@gondor.apana.org.au > Subject: Arm CryptoCell driver -- default Y, even on machines where it is > obviously useless > > Hi! > > I'm configuring kernel for x86, and I get offered HW_RANDOM_CCTRNG with > default=Y, and help text suggesting I should enable it. > > That's... two wrong suggestions, right? > > Best regards, > Pavel > -- > (english) http://www.livejournal.com/~pavelmachek > (cesky, pictures) > http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <VI1PR08MB3584451F0B0B21E00ACF56A7FED70@VI1PR08MB3584.eurprd08.prod.outlook.com>]
* Re: Fw: Arm CryptoCell driver -- default Y, even on machines where it is obviously useless [not found] ` <VI1PR08MB3584451F0B0B21E00ACF56A7FED70@VI1PR08MB3584.eurprd08.prod.outlook.com> @ 2020-04-19 6:33 ` Gilad Ben-Yossef 2020-04-19 8:55 ` Ard Biesheuvel 0 siblings, 1 reply; 9+ messages in thread From: Gilad Ben-Yossef @ 2020-04-19 6:33 UTC (permalink / raw) To: Gilad Ben Yossef, Herbert Xu, Hadar Gat Cc: kernel list, Linux Crypto Mailing List > > -----Original Message----- > > From: Pavel Machek <pavel@ucw.cz> > > Sent: Saturday, 18 April 2020 13:44 > > To: kernel list <linux-kernel@vger.kernel.org>; Hadar Gat > > <Hadar.Gat@arm.com>; herbert@gondor.apana.org.au > > Subject: Arm CryptoCell driver -- default Y, even on machines where it is > > obviously useless > > > > Hi! > > > > I'm configuring kernel for x86, and I get offered HW_RANDOM_CCTRNG with > > default=Y, and help text suggesting I should enable it. > > > > That's... two wrong suggestions, right? > > > > Best regards, > > Pavel ... > ________________________________________ > From: Hadar Gat <Hadar.Gat@arm.com> > Sent: Saturday, April 18, 2020 11:31 PM > To: Pavel Machek; kernel list; herbert@gondor.apana.org.au > Cc: Ofir Drang; Gilad Ben Yossef; nd > Subject: RE: Arm CryptoCell driver -- default Y, even on machines where it is obviously useless > > Hi Pavel, > I think you got it right.. > Indeed, Arm CryptoCell CCTRNG driver couldn't be used and obviously useless if the Arm CryptoCell HW does not exist in the system. There's a delicate point here though - CryptoCell is an independent hardware block, it is not tied to a particular CPU architecture. There are SoCs with none-Arm architecture CPU using it. So I would say whatever the answer is, it should be the same for any generic embedded style HW block. And the help text is not architecture specific anyway, is it not..? Gilad -- Gilad Ben-Yossef Chief Coffee Drinker values of β will give rise to dom! ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Fw: Arm CryptoCell driver -- default Y, even on machines where it is obviously useless 2020-04-19 6:33 ` Fw: " Gilad Ben-Yossef @ 2020-04-19 8:55 ` Ard Biesheuvel 2020-04-26 12:49 ` Hadar Gat 0 siblings, 1 reply; 9+ messages in thread From: Ard Biesheuvel @ 2020-04-19 8:55 UTC (permalink / raw) To: Gilad Ben-Yossef Cc: Herbert Xu, Hadar Gat, kernel list, Linux Crypto Mailing List On Sun, 19 Apr 2020 at 08:33, Gilad Ben-Yossef <gilad@benyossef.com> wrote: > > > > -----Original Message----- > > > From: Pavel Machek <pavel@ucw.cz> > > > Sent: Saturday, 18 April 2020 13:44 > > > To: kernel list <linux-kernel@vger.kernel.org>; Hadar Gat > > > <Hadar.Gat@arm.com>; herbert@gondor.apana.org.au > > > Subject: Arm CryptoCell driver -- default Y, even on machines where it is > > > obviously useless > > > > > > Hi! > > > > > > I'm configuring kernel for x86, and I get offered HW_RANDOM_CCTRNG with > > > default=Y, and help text suggesting I should enable it. > > > > > > That's... two wrong suggestions, right? > > > > > > Best regards, > > > Pavel > ... > > ________________________________________ > > From: Hadar Gat <Hadar.Gat@arm.com> > > Sent: Saturday, April 18, 2020 11:31 PM > > To: Pavel Machek; kernel list; herbert@gondor.apana.org.au > > Cc: Ofir Drang; Gilad Ben Yossef; nd > > Subject: RE: Arm CryptoCell driver -- default Y, even on machines where it is obviously useless > > > > Hi Pavel, > > I think you got it right.. > > Indeed, Arm CryptoCell CCTRNG driver couldn't be used and obviously useless if the Arm CryptoCell HW does not exist in the system. > > There's a delicate point here though - CryptoCell is an independent > hardware block, it is not tied to a particular CPU architecture. > There are SoCs with none-Arm architecture CPU using it. > > So I would say whatever the answer is, it should be the same for any > generic embedded style HW block. > > And the help text is not architecture specific anyway, is it not..? > Both the default y and and the help text are indeed incorrect. This should be fixed. We don't enable device drivers by default, and definitely not as as builtins. A conditional default m could be acceptable if the condition is sufficiently narrow. While at it, could we add a depends on CONFIG_OF since this code is definitely unusable on non-DT systems. ^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: Fw: Arm CryptoCell driver -- default Y, even on machines where it is obviously useless 2020-04-19 8:55 ` Ard Biesheuvel @ 2020-04-26 12:49 ` Hadar Gat 2020-04-26 12:56 ` Ard Biesheuvel 0 siblings, 1 reply; 9+ messages in thread From: Hadar Gat @ 2020-04-26 12:49 UTC (permalink / raw) To: Ard Biesheuvel, Gilad Ben-Yossef Cc: Herbert Xu, kernel list, Linux Crypto Mailing List, nd Hi Ard, > -----Original Message----- > From: Ard Biesheuvel <ardb@kernel.org> > Sent: Sunday, 19 April 2020 11:55 > > > > > -----Original Message----- > > > > From: Pavel Machek <pavel@ucw.cz> > > > > Sent: Saturday, 18 April 2020 13:44 > > > > > > > > Hi! > > > > > > > > I'm configuring kernel for x86, and I get offered > HW_RANDOM_CCTRNG > > > > with default=Y, and help text suggesting I should enable it. > > > > > > > > That's... two wrong suggestions, right? > > > > > > > > Best regards, > > > > Pavel > > ... > > > ________________________________________ > > > From: Hadar Gat <Hadar.Gat@arm.com> > > > Sent: Saturday, April 18, 2020 11:31 PM > > > > > > Hi Pavel, > > > I think you got it right.. > > > Indeed, Arm CryptoCell CCTRNG driver couldn't be used and obviously > useless if the Arm CryptoCell HW does not exist in the system. > > > > There's a delicate point here though - CryptoCell is an independent > > hardware block, it is not tied to a particular CPU architecture. > > There are SoCs with none-Arm architecture CPU using it. > > > > So I would say whatever the answer is, it should be the same for any > > generic embedded style HW block. > > > > And the help text is not architecture specific anyway, is it not..? > > > > Both the default y and and the help text are indeed incorrect. This should be > fixed. We don't enable device drivers by default, and definitely not as as > builtins. A conditional default m could be acceptable if the condition is > sufficiently narrow. On one hand I totally agree with that and think the default should be N. On the other hand, most of the HW_RANDOM drivers set the default to HW_RANDOM and it doesn't make sense to me to do something different than almost every other HW RANDOM device. Do I miss something here? > > While at it, could we add a depends on CONFIG_OF since this code is > definitely unusable on non-DT systems. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Fw: Arm CryptoCell driver -- default Y, even on machines where it is obviously useless 2020-04-26 12:49 ` Hadar Gat @ 2020-04-26 12:56 ` Ard Biesheuvel 2020-04-26 13:06 ` Hadar Gat 0 siblings, 1 reply; 9+ messages in thread From: Ard Biesheuvel @ 2020-04-26 12:56 UTC (permalink / raw) To: Hadar Gat Cc: Gilad Ben-Yossef, Herbert Xu, kernel list, Linux Crypto Mailing List, nd On Sun, 26 Apr 2020 at 14:50, Hadar Gat <Hadar.Gat@arm.com> wrote: > > Hi Ard, > > > -----Original Message----- > > From: Ard Biesheuvel <ardb@kernel.org> > > Sent: Sunday, 19 April 2020 11:55 > > > > > > > -----Original Message----- > > > > > From: Pavel Machek <pavel@ucw.cz> > > > > > Sent: Saturday, 18 April 2020 13:44 > > > > > > > > > > Hi! > > > > > > > > > > I'm configuring kernel for x86, and I get offered > > HW_RANDOM_CCTRNG > > > > > with default=Y, and help text suggesting I should enable it. > > > > > > > > > > That's... two wrong suggestions, right? > > > > > > > > > > Best regards, > > > > > Pavel > > > ... > > > > ________________________________________ > > > > From: Hadar Gat <Hadar.Gat@arm.com> > > > > Sent: Saturday, April 18, 2020 11:31 PM > > > > > > > > Hi Pavel, > > > > I think you got it right.. > > > > Indeed, Arm CryptoCell CCTRNG driver couldn't be used and obviously > > useless if the Arm CryptoCell HW does not exist in the system. > > > > > > There's a delicate point here though - CryptoCell is an independent > > > hardware block, it is not tied to a particular CPU architecture. > > > There are SoCs with none-Arm architecture CPU using it. > > > > > > So I would say whatever the answer is, it should be the same for any > > > generic embedded style HW block. > > > > > > And the help text is not architecture specific anyway, is it not..? > > > > > > > Both the default y and and the help text are indeed incorrect. This should be > > fixed. We don't enable device drivers by default, and definitely not as as > > builtins. A conditional default m could be acceptable if the condition is > > sufficiently narrow. > > On one hand I totally agree with that and think the default should be N. > On the other hand, most of the HW_RANDOM drivers set the default to HW_RANDOM > and it doesn't make sense to me to do something different than almost every other HW RANDOM device. > Do I miss something here? > Yes. First of all, using 'default HW_RANDOM' everywhere makes no sense at all, but that is not your fault. If you look at drivers/char/hw_random/Kconfig, you will see that most drivers have additional depends lines, which means that 'default m' (or 'default y' in case CONFIG_HW_RANDOM=y) will only take affect if the dependency is fulfilled. It makes no sense to enable this driver on *every* single Linux system, right? Especially given that many architectures do not even support device tree, which is a prerequisite to be able to even probe. drivers/char/hw_random/Kconfig-config HW_RANDOM_INTEL drivers/char/hw_random/Kconfig- depends on (X86 || IA64) && PCI -- drivers/char/hw_random/Kconfig-config HW_RANDOM_AMD drivers/char/hw_random/Kconfig- depends on (X86 || PPC_MAPLE) && PCI -- drivers/char/hw_random/Kconfig-config HW_RANDOM_ATMEL drivers/char/hw_random/Kconfig- depends on ARCH_AT91 && HAVE_CLK && OF -- drivers/char/hw_random/Kconfig-config HW_RANDOM_BCM2835 drivers/char/hw_random/Kconfig- depends on ARCH_BCM2835 || ARCH_BCM_NSP || ARCH_BCM_5301X || \ -- drivers/char/hw_random/Kconfig-config HW_RANDOM_IPROC_RNG200 drivers/char/hw_random/Kconfig- depends on ARCH_BCM_IPROC || ARCH_BCM2835 || ARCH_BRCMSTB -- drivers/char/hw_random/Kconfig-config HW_RANDOM_GEODE drivers/char/hw_random/Kconfig- depends on X86_32 && PCI -- drivers/char/hw_random/Kconfig-config HW_RANDOM_N2RNG drivers/char/hw_random/Kconfig- depends on SPARC64 -- drivers/char/hw_random/Kconfig-config HW_RANDOM_VIA drivers/char/hw_random/Kconfig- depends on X86 -- drivers/char/hw_random/Kconfig-config HW_RANDOM_IXP4XX drivers/char/hw_random/Kconfig- depends on ARCH_IXP4XX -- drivers/char/hw_random/Kconfig-config HW_RANDOM_OMAP drivers/char/hw_random/Kconfig- depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS || ARCH_MVEBU -- drivers/char/hw_random/Kconfig-config HW_RANDOM_OMAP3_ROM drivers/char/hw_random/Kconfig- depends on ARCH_OMAP3 -- drivers/char/hw_random/Kconfig-config HW_RANDOM_OCTEON drivers/char/hw_random/Kconfig- depends on CAVIUM_OCTEON_SOC -- drivers/char/hw_random/Kconfig-config HW_RANDOM_PASEMI drivers/char/hw_random/Kconfig- depends on PPC_PASEMI -- drivers/char/hw_random/Kconfig-config HW_RANDOM_VIRTIO drivers/char/hw_random/Kconfig- depends on VIRTIO -- drivers/char/hw_random/Kconfig-config HW_RANDOM_TX4939 drivers/char/hw_random/Kconfig- depends on SOC_TX4939 -- drivers/char/hw_random/Kconfig-config HW_RANDOM_MXC_RNGA drivers/char/hw_random/Kconfig- depends on SOC_IMX31 -- drivers/char/hw_random/Kconfig-config HW_RANDOM_IMX_RNGC drivers/char/hw_random/Kconfig- depends on HAS_IOMEM && HAVE_CLK -- drivers/char/hw_random/Kconfig-config HW_RANDOM_NOMADIK drivers/char/hw_random/Kconfig- depends on ARCH_NOMADIK -- drivers/char/hw_random/Kconfig-config HW_RANDOM_PSERIES drivers/char/hw_random/Kconfig- depends on PPC64 && IBMVIO -- drivers/char/hw_random/Kconfig-config HW_RANDOM_POWERNV drivers/char/hw_random/Kconfig- depends on PPC_POWERNV -- drivers/char/hw_random/Kconfig-config HW_RANDOM_HISI drivers/char/hw_random/Kconfig- depends on HW_RANDOM && ARCH_HISI -- drivers/char/hw_random/Kconfig-config HW_RANDOM_HISI_V2 drivers/char/hw_random/Kconfig- depends on HW_RANDOM && ARM64 && ACPI -- drivers/char/hw_random/Kconfig-config HW_RANDOM_ST drivers/char/hw_random/Kconfig- depends on HW_RANDOM && ARCH_STI -- drivers/char/hw_random/Kconfig-config HW_RANDOM_XGENE drivers/char/hw_random/Kconfig- depends on HW_RANDOM && ARCH_XGENE -- drivers/char/hw_random/Kconfig-config HW_RANDOM_STM32 drivers/char/hw_random/Kconfig- depends on HW_RANDOM && (ARCH_STM32 || COMPILE_TEST) -- drivers/char/hw_random/Kconfig-config HW_RANDOM_PIC32 drivers/char/hw_random/Kconfig- depends on HW_RANDOM && MACH_PIC32 -- drivers/char/hw_random/Kconfig-config HW_RANDOM_MESON drivers/char/hw_random/Kconfig- depends on HW_RANDOM -- drivers/char/hw_random/Kconfig-config HW_RANDOM_CAVIUM drivers/char/hw_random/Kconfig- depends on HW_RANDOM && PCI && (ARM64 || (COMPILE_TEST && 64BIT)) -- drivers/char/hw_random/Kconfig-config HW_RANDOM_MTK drivers/char/hw_random/Kconfig- depends on HW_RANDOM -- drivers/char/hw_random/Kconfig-config HW_RANDOM_S390 drivers/char/hw_random/Kconfig- depends on S390 -- drivers/char/hw_random/Kconfig-config HW_RANDOM_EXYNOS drivers/char/hw_random/Kconfig- depends on ARCH_EXYNOS || COMPILE_TEST -- drivers/char/hw_random/Kconfig-config HW_RANDOM_OPTEE drivers/char/hw_random/Kconfig- depends on OPTEE -- drivers/char/hw_random/Kconfig-config HW_RANDOM_NPCM drivers/char/hw_random/Kconfig- depends on ARCH_NPCM || COMPILE_TEST ^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: Fw: Arm CryptoCell driver -- default Y, even on machines where it is obviously useless 2020-04-26 12:56 ` Ard Biesheuvel @ 2020-04-26 13:06 ` Hadar Gat 0 siblings, 0 replies; 9+ messages in thread From: Hadar Gat @ 2020-04-26 13:06 UTC (permalink / raw) To: Ard Biesheuvel Cc: Gilad Ben-Yossef, Herbert Xu, kernel list, Linux Crypto Mailing List, nd > > > -----Original Message----- > > > From: Ard Biesheuvel <ardb@kernel.org> > > > Sent: Sunday, 19 April 2020 11:55 > > > > > > Both the default y and and the help text are indeed incorrect. This > > > should be fixed. We don't enable device drivers by default, and > > > definitely not as as builtins. A conditional default m could be > > > acceptable if the condition is sufficiently narrow. > > > > On one hand I totally agree with that and think the default should be N. > > On the other hand, most of the HW_RANDOM drivers set the default to > > HW_RANDOM and it doesn't make sense to me to do something different > than almost every other HW RANDOM device. > > Do I miss something here? > > > > Yes. First of all, using 'default HW_RANDOM' everywhere makes no sense at > all, but that is not your fault. > > If you look at drivers/char/hw_random/Kconfig, you will see that most > drivers have additional depends lines, which means that 'default m' > (or 'default y' in case CONFIG_HW_RANDOM=y) will only take affect if the > dependency is fulfilled. > > It makes no sense to enable this driver on *every* single Linux system, right? > Especially given that many architectures do not even support device tree, > which is a prerequisite to be able to even probe. > Thanks you Ard for clearing it up for me. I'll fix that shortly. Hadar > > > > drivers/char/hw_random/Kconfig-config HW_RANDOM_INTEL > drivers/char/hw_random/Kconfig- depends on (X86 || IA64) && PCI > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_AMD > drivers/char/hw_random/Kconfig- depends on (X86 || PPC_MAPLE) && PCI > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_ATMEL > drivers/char/hw_random/Kconfig- depends on ARCH_AT91 && HAVE_CLK > && OF > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_BCM2835 > drivers/char/hw_random/Kconfig- depends on ARCH_BCM2835 || > ARCH_BCM_NSP || ARCH_BCM_5301X || \ > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_IPROC_RNG200 > drivers/char/hw_random/Kconfig- depends on ARCH_BCM_IPROC || > ARCH_BCM2835 || ARCH_BRCMSTB > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_GEODE > drivers/char/hw_random/Kconfig- depends on X86_32 && PCI > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_N2RNG > drivers/char/hw_random/Kconfig- depends on SPARC64 > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_VIA > drivers/char/hw_random/Kconfig- depends on X86 > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_IXP4XX > drivers/char/hw_random/Kconfig- depends on ARCH_IXP4XX > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_OMAP > drivers/char/hw_random/Kconfig- depends on ARCH_OMAP16XX || > ARCH_OMAP2PLUS || ARCH_MVEBU > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_OMAP3_ROM > drivers/char/hw_random/Kconfig- depends on ARCH_OMAP3 > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_OCTEON > drivers/char/hw_random/Kconfig- depends on CAVIUM_OCTEON_SOC > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_PASEMI > drivers/char/hw_random/Kconfig- depends on PPC_PASEMI > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_VIRTIO > drivers/char/hw_random/Kconfig- depends on VIRTIO > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_TX4939 > drivers/char/hw_random/Kconfig- depends on SOC_TX4939 > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_MXC_RNGA > drivers/char/hw_random/Kconfig- depends on SOC_IMX31 > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_IMX_RNGC > drivers/char/hw_random/Kconfig- depends on HAS_IOMEM && HAVE_CLK > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_NOMADIK > drivers/char/hw_random/Kconfig- depends on ARCH_NOMADIK > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_PSERIES > drivers/char/hw_random/Kconfig- depends on PPC64 && IBMVIO > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_POWERNV > drivers/char/hw_random/Kconfig- depends on PPC_POWERNV > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_HISI > drivers/char/hw_random/Kconfig- depends on HW_RANDOM && > ARCH_HISI > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_HISI_V2 > drivers/char/hw_random/Kconfig- depends on HW_RANDOM && ARM64 > && ACPI > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_ST > drivers/char/hw_random/Kconfig- depends on HW_RANDOM && ARCH_STI > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_XGENE > drivers/char/hw_random/Kconfig- depends on HW_RANDOM && > ARCH_XGENE > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_STM32 > drivers/char/hw_random/Kconfig- depends on HW_RANDOM && > (ARCH_STM32 || > COMPILE_TEST) > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_PIC32 > drivers/char/hw_random/Kconfig- depends on HW_RANDOM && > MACH_PIC32 > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_MESON > drivers/char/hw_random/Kconfig- depends on HW_RANDOM > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_CAVIUM > drivers/char/hw_random/Kconfig- depends on HW_RANDOM && PCI && > (ARM64 > || (COMPILE_TEST && 64BIT)) > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_MTK > drivers/char/hw_random/Kconfig- depends on HW_RANDOM > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_S390 > drivers/char/hw_random/Kconfig- depends on S390 > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_EXYNOS > drivers/char/hw_random/Kconfig- depends on ARCH_EXYNOS || > COMPILE_TEST > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_OPTEE > drivers/char/hw_random/Kconfig- depends on OPTEE > -- > drivers/char/hw_random/Kconfig-config HW_RANDOM_NPCM > drivers/char/hw_random/Kconfig- depends on ARCH_NPCM || > COMPILE_TEST ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Arm CryptoCell driver -- default Y, even on machines where it is obviously useless 2020-04-18 20:31 ` Hadar Gat [not found] ` <VI1PR08MB3584451F0B0B21E00ACF56A7FED70@VI1PR08MB3584.eurprd08.prod.outlook.com> @ 2020-04-25 21:18 ` Pavel Machek 2020-04-26 5:34 ` Hadar Gat 1 sibling, 1 reply; 9+ messages in thread From: Pavel Machek @ 2020-04-25 21:18 UTC (permalink / raw) To: Hadar Gat Cc: kernel list, herbert@gondor.apana.org.au, Ofir Drang, Gilad Ben Yossef, nd [-- Attachment #1: Type: text/plain, Size: 433 bytes --] On Sat 2020-04-18 20:31:00, Hadar Gat wrote: > Hi Pavel, > I think you got it right.. > Indeed, Arm CryptoCell CCTRNG driver couldn't be used and obviously useless if the Arm CryptoCell HW does not exist in the system. Yup.. So.. can authors fix it somehow? Thanks, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 181 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: Arm CryptoCell driver -- default Y, even on machines where it is obviously useless 2020-04-25 21:18 ` Pavel Machek @ 2020-04-26 5:34 ` Hadar Gat 0 siblings, 0 replies; 9+ messages in thread From: Hadar Gat @ 2020-04-26 5:34 UTC (permalink / raw) To: Pavel Machek Cc: kernel list, herbert@gondor.apana.org.au, Ofir Drang, Gilad Ben Yossef, nd > -----Original Message----- > From: Pavel Machek <pavel@ucw.cz> > Sent: Sunday, 26 April 2020 0:18 > > On Sat 2020-04-18 20:31:00, Hadar Gat wrote: > > Hi Pavel, > > I think you got it right.. > > Indeed, Arm CryptoCell CCTRNG driver couldn't be used and obviously > useless if the Arm CryptoCell HW does not exist in the system. > > Yup.. So.. can authors fix it somehow? > Yes. I'm on it. ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-04-26 13:06 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-04-18 10:43 Arm CryptoCell driver -- default Y, even on machines where it is obviously useless Pavel Machek
2020-04-18 20:31 ` Hadar Gat
[not found] ` <VI1PR08MB3584451F0B0B21E00ACF56A7FED70@VI1PR08MB3584.eurprd08.prod.outlook.com>
2020-04-19 6:33 ` Fw: " Gilad Ben-Yossef
2020-04-19 8:55 ` Ard Biesheuvel
2020-04-26 12:49 ` Hadar Gat
2020-04-26 12:56 ` Ard Biesheuvel
2020-04-26 13:06 ` Hadar Gat
2020-04-25 21:18 ` Pavel Machek
2020-04-26 5:34 ` Hadar Gat
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).