Re: [PATCH v2 1/2] iio: at91-sama5d2_adc: split at91_adc_current_chan_is_touch() helper

[Jonathan Cameron <jic23@kernel.org>]

On Wed, 15 Apr 2020 08:43:52 +0200
ludovic.desroches@microchip.com wrote:

> On Tue, Apr 14, 2020 at 12:22:45PM +0000, Eugen Hristev - M18282 wrote:
> > On 13.04.2020 20:05, Jonathan Cameron wrote:  
> > > On Wed, 4 Mar 2020 10:42:18 +0200
> > > Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
> > >   
> > >> This change moves the logic to check if the current channel is the
> > >> touchscreen channel to a separate helper.
> > >> This reduces some code duplication, but the main intent is to re-use this
> > >> in the next patches.
> > >>
> > >> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>  
> > > Eugen / Ludovic,
> > > 
> > > Have you had a chance to look at this series?  
> > 
> > Hi Jonathan,
> > 
> > Does the patch apply correctly for you ?  
> 
> No issue on my side to apply them (v5.7-rc1 and next).
> 
> > I will try to test it , if I manage to apply it.
> > I can only test the ADC though because at this moment I do not have a 
> > touchscreen at disposal.  
> 
> Same here, not able to test the touchscreen but it doesn't seem very risky.
> 
> > 
> > Meanwhile, the code looks good for me,
> > 
> > Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com>  
> 
> You can add mine as well:
> 
> Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>

For both of you - tags for both patches or just this one?

Thanks,

Jonathan

> 
> Regards
> 
> Ludovic
> 
> > 
> > By the way, I do not know if my two pending patches on this driver will 
> > conflict or not.
> > 
> > Eugen
> >   
> > > 
> > > Thanks,
> > > 
> > > Jonathan
> > >   
> > >> ---
> > >>
> > >> This patchset continues discussion:
> > >>     https://lore.kernel.org/linux-iio/20191023082508.17583-1-alexandru.ardelean@analog.com/
> > >> Apologies for the delay.
> > >>
> > >> Changelog v1 -> v2:
> > >> * added patch 'iio: at91-sama5d2_adc: split at91_adc_current_chan_is_touch()
> > >>    helper'
> > >> * renamed at91_adc_buffer_postenable() -> at91_adc_buffer_preenable()
> > >>    - at91_adc_buffer_postenable() - now just calls
> > >>      iio_triggered_buffer_postenable() if the channel isn't the touchscreen
> > >>      channel
> > >> * renamed at91_adc_buffer_predisable() -> at91_adc_buffer_postdisable()
> > >>    - at91_adc_buffer_predisable() - now just calls
> > >>      iio_triggered_buffer_predisable() if the channel isn't the touchscreen
> > >>      channel
> > >>
> > >>   drivers/iio/adc/at91-sama5d2_adc.c | 31 +++++++++++++++---------------
> > >>   1 file changed, 15 insertions(+), 16 deletions(-)
> > >>
> > >> diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
> > >> index a5c7771227d5..f2a74c47c768 100644
> > >> --- a/drivers/iio/adc/at91-sama5d2_adc.c
> > >> +++ b/drivers/iio/adc/at91-sama5d2_adc.c
> > >> @@ -873,18 +873,24 @@ static int at91_adc_dma_start(struct iio_dev *indio_dev)
> > >>        return 0;
> > >>   }
> > >>
> > >> +static bool at91_adc_current_chan_is_touch(struct iio_dev *indio_dev)
> > >> +{
> > >> +     struct at91_adc_state *st = iio_priv(indio_dev);
> > >> +
> > >> +     return !!bitmap_subset(indio_dev->active_scan_mask,
> > >> +                            &st->touch_st.channels_bitmask,
> > >> +                            AT91_SAMA5D2_MAX_CHAN_IDX + 1);
> > >> +}
> > >> +
> > >>   static int at91_adc_buffer_postenable(struct iio_dev *indio_dev)
> > >>   {
> > >>        int ret;
> > >>        struct at91_adc_state *st = iio_priv(indio_dev);
> > >>
> > >>        /* check if we are enabling triggered buffer or the touchscreen */
> > >> -     if (bitmap_subset(indio_dev->active_scan_mask,
> > >> -                       &st->touch_st.channels_bitmask,
> > >> -                       AT91_SAMA5D2_MAX_CHAN_IDX + 1)) {
> > >> -             /* touchscreen enabling */
> > >> +     if (at91_adc_current_chan_is_touch(indio_dev))
> > >>                return at91_adc_configure_touch(st, true);
> > >> -     }
> > >> +
> > >>        /* if we are not in triggered mode, we cannot enable the buffer. */
> > >>        if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES))
> > >>                return -EINVAL;
> > >> @@ -906,12 +912,9 @@ static int at91_adc_buffer_predisable(struct iio_dev *indio_dev)
> > >>        u8 bit;
> > >>
> > >>        /* check if we are disabling triggered buffer or the touchscreen */
> > >> -     if (bitmap_subset(indio_dev->active_scan_mask,
> > >> -                       &st->touch_st.channels_bitmask,
> > >> -                       AT91_SAMA5D2_MAX_CHAN_IDX + 1)) {
> > >> -             /* touchscreen disable */
> > >> +     if (at91_adc_current_chan_is_touch(indio_dev))
> > >>                return at91_adc_configure_touch(st, false);
> > >> -     }
> > >> +
> > >>        /* if we are not in triggered mode, nothing to do here */
> > >>        if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES))
> > >>                return -EINVAL;
> > >> @@ -1886,14 +1889,10 @@ static __maybe_unused int at91_adc_resume(struct device *dev)
> > >>                return 0;
> > >>
> > >>        /* check if we are enabling triggered buffer or the touchscreen */
> > >> -     if (bitmap_subset(indio_dev->active_scan_mask,
> > >> -                       &st->touch_st.channels_bitmask,
> > >> -                       AT91_SAMA5D2_MAX_CHAN_IDX + 1)) {
> > >> -             /* touchscreen enabling */
> > >> +     if (at91_adc_current_chan_is_touch(indio_dev))
> > >>                return at91_adc_configure_touch(st, true);
> > >> -     } else {
> > >> +     else
> > >>                return at91_adc_configure_trigger(st->trig, true);
> > >> -     }
> > >>
> > >>        /* not needed but more explicit */
> > >>        return 0;  
> > >   
> >