From: Jin Yao <yao.jin@linux.intel.com>
To: acme@kernel.org, jolsa@kernel.org, peterz@infradead.org,
mingo@redhat.com, alexander.shishkin@linux.intel.com
Cc: Linux-kernel@vger.kernel.org, ak@linux.intel.com,
kan.liang@intel.com, yao.jin@intel.com,
Jin Yao <yao.jin@linux.intel.com>
Subject: [PATCH v3 0/7] perf: Stream comparison
Date: Mon, 20 Apr 2020 09:04:44 +0800 [thread overview]
Message-ID: <20200420010451.24405-1-yao.jin@linux.intel.com> (raw)
Sometimes, a small change in a hot function reducing the cycles of
this function, but the overall workload doesn't get faster. It is
interesting where the cycles are moved to.
What it would like is to diff before/after streams. A stream we think
is a callchain which is aggregated by the branch records from perf
samples.
By browsing the hot streams, we can understand the hot code path.
By comparing the cycles variation of same streams between old perf
data and new perf data, we can understand if the cycles are moved
to other codes.
The before stream is the stream in perf.data.old. The after stream
is the stream in perf.data.
Diffing before/after streams compares top N hottest streams between
two perf data files.
If all entries of one stream in perf.data.old are fully matched with
all entries of another stream in perf.data, we think two streams
are matched, otherwise the streams are not matched.
For example,
cycles: 1, hits: 26.80% cycles: 1, hits: 27.30%
-------------------------- --------------------------
main div.c:39 main div.c:39
main div.c:44 main div.c:44
The above streams are matched and we can see for the same streams the
cycles (1) are equal and the callchain hit percents are slightly changed
(26.80% vs. 27.30%). That's expected.
But that's not always true if source code is changed in perf.data
(e.g. div.c:39 is changed). If div.c:39 is changed, they are different
streams, we can't compare them. We will think the stream in perf.data
is a new stream.
The challenge is how to identify the changed source lines. The basic
idea is to use linux command "diff" to compare the source file A and
source file A* line by line (assume file A is used in perf.data.old
and file A* is used in perf.data). According to "diff" output,
we can generate a source line mapping table.
For example,
Execute 'diff ./before/div.c ./after/div.c'
25c25
< i = rand() % 2;
---
> i = rand() % 4;
39c39
< for (i = 0; i < 2000000000; i++) {
---
> for (i = 0; i < 20000000001; i++) {
div.c (after -> before) lines mapping:
0 -> 0
1 -> 1
2 -> 2
3 -> 3
4 -> 4
5 -> 5
6 -> 6
7 -> 7
8 -> 8
9 -> 9
...
24 -> 24
25 -> -1
26 -> 26
27 -> 27
28 -> 28
29 -> 29
30 -> 30
31 -> 31
32 -> 32
33 -> 33
34 -> 34
35 -> 35
36 -> 36
37 -> 37
38 -> 38
39 -> -1
40 -> 40
...
From the table, we can easily know div.c:39 is source line changed.
(it's mapped to -1). So following two streams are not matched.
cycles: 1, hits: 26.80% cycles: 1, hits: 27.30%
-------------------------- --------------------------
main div.c:39 main div.c:39
main div.c:44 main div.c:44
Now let's see examples.
perf record -b ... Generate perf.data.old with branch data
perf record -b ... Generate perf.data with branch data
perf diff --stream
[ Matched hot chains between old perf data and new perf data) ]
hot chain pair 1:
cycles: 1, hits: 26.80% cycles: 1, hits: 27.30%
--------------------------- --------------------------
main div.c:39 main div.c:39
main div.c:44 main div.c:44
hot chain pair 2:
cycles: 35, hits: 21.43% cycles: 33, hits: 19.37%
--------------------------- --------------------------
__random_r random_r.c:360 __random_r random_r.c:360
__random_r random_r.c:388 __random_r random_r.c:388
__random_r random_r.c:388 __random_r random_r.c:388
__random_r random_r.c:380 __random_r random_r.c:380
__random_r random_r.c:357 __random_r random_r.c:357
__random random.c:293 __random random.c:293
__random random.c:293 __random random.c:293
__random random.c:291 __random random.c:291
__random random.c:291 __random random.c:291
__random random.c:291 __random random.c:291
__random random.c:288 __random random.c:288
rand rand.c:27 rand rand.c:27
rand rand.c:26 rand rand.c:26
rand@plt rand@plt
rand@plt rand@plt
compute_flag div.c:25 compute_flag div.c:25
compute_flag div.c:22 compute_flag div.c:22
main div.c:40 main div.c:40
main div.c:40 main div.c:40
main div.c:39 main div.c:39
hot chain pair 3:
cycles: 18, hits: 6.10% cycles: 19, hits: 6.51%
--------------------------- --------------------------
__random_r random_r.c:360 __random_r random_r.c:360
__random_r random_r.c:388 __random_r random_r.c:388
__random_r random_r.c:388 __random_r random_r.c:388
__random_r random_r.c:380 __random_r random_r.c:380
__random_r random_r.c:357 __random_r random_r.c:357
__random random.c:293 __random random.c:293
__random random.c:293 __random random.c:293
__random random.c:291 __random random.c:291
__random random.c:291 __random random.c:291
__random random.c:291 __random random.c:291
__random random.c:288 __random random.c:288
rand rand.c:27 rand rand.c:27
rand rand.c:26 rand rand.c:26
rand@plt rand@plt
rand@plt rand@plt
compute_flag div.c:25 compute_flag div.c:25
compute_flag div.c:22 compute_flag div.c:22
main div.c:40 main div.c:40
hot chain pair 4:
cycles: 9, hits: 5.95% cycles: 8, hits: 5.03%
--------------------------- --------------------------
__random_r random_r.c:360 __random_r random_r.c:360
__random_r random_r.c:388 __random_r random_r.c:388
__random_r random_r.c:388 __random_r random_r.c:388
__random_r random_r.c:380 __random_r random_r.c:380
[ Hot chains in old perf data but source line changed (*) in new perf data ]
[ Hot chains in old perf data only ]
hot chain 1:
cycles: 2, hits: 4.08%
--------------------------
main div.c:42
compute_flag div.c:28
[ Hot chains in new perf data only ]
hot chain 1:
cycles: 36, hits: 3.36%
--------------------------
__random_r random_r.c:357
__random random.c:293
__random random.c:293
__random random.c:291
__random random.c:291
__random random.c:291
__random random.c:288
rand rand.c:27
rand rand.c:26
rand@plt
rand@plt
compute_flag div.c:25
compute_flag div.c:22
main div.c:40
main div.c:40
If we enable the source line comparison option, the output may be different.
perf record -b ... Generate perf.data.old with branch data
perf record -b ... Generate perf.data with branch data
perf diff --stream --before ./before --after ./after
[ Matched hot chains between old perf data and new perf data) ]
hot chain pair 1:
cycles: 18, hits: 6.10% cycles: 19, hits: 6.51%
--------------------------- --------------------------
__random_r random_r.c:360 __random_r random_r.c:360
__random_r random_r.c:388 __random_r random_r.c:388
__random_r random_r.c:388 __random_r random_r.c:388
__random_r random_r.c:380 __random_r random_r.c:380
__random_r random_r.c:357 __random_r random_r.c:357
__random random.c:293 __random random.c:293
__random random.c:293 __random random.c:293
__random random.c:291 __random random.c:291
__random random.c:291 __random random.c:291
__random random.c:291 __random random.c:291
__random random.c:288 __random random.c:288
rand rand.c:27 rand rand.c:27
rand rand.c:26 rand rand.c:26
rand@plt rand@plt
rand@plt rand@plt
compute_flag div.c:25 compute_flag div.c:25
compute_flag div.c:22 compute_flag div.c:22
main div.c:40 main div.c:40
hot chain pair 2:
cycles: 9, hits: 5.95% cycles: 8, hits: 5.03%
--------------------------- --------------------------
__random_r random_r.c:360 __random_r random_r.c:360
__random_r random_r.c:388 __random_r random_r.c:388
__random_r random_r.c:388 __random_r random_r.c:388
__random_r random_r.c:380 __random_r random_r.c:380
[ Hot chains in old perf data but source line changed (*) in new perf data ]
hot chain pair 1:
cycles: 1, hits: 26.80% cycles: 1, hits: 27.30%
--------------------------- --------------------------
main div.c:39 main div.c:39*
main div.c:44 main div.c:44
hot chain pair 2:
cycles: 35, hits: 21.43% cycles: 33, hits: 19.37%
--------------------------- --------------------------
__random_r random_r.c:360 __random_r random_r.c:360
__random_r random_r.c:388 __random_r random_r.c:388
__random_r random_r.c:388 __random_r random_r.c:388
__random_r random_r.c:380 __random_r random_r.c:380
__random_r random_r.c:357 __random_r random_r.c:357
__random random.c:293 __random random.c:293
__random random.c:293 __random random.c:293
__random random.c:291 __random random.c:291
__random random.c:291 __random random.c:291
__random random.c:291 __random random.c:291
__random random.c:288 __random random.c:288
rand rand.c:27 rand rand.c:27
rand rand.c:26 rand rand.c:26
rand@plt rand@plt
rand@plt rand@plt
compute_flag div.c:25 compute_flag div.c:25
compute_flag div.c:22 compute_flag div.c:22
main div.c:40 main div.c:40
main div.c:40 main div.c:40
main div.c:39 main div.c:39*
[ Hot chains in old perf data only ]
hot chain 1:
cycles: 2, hits: 4.08%
--------------------------
main div.c:42
compute_flag div.c:28
[ Hot chains in new perf data only ]
hot chain 1:
cycles: 36, hits: 3.36%
--------------------------
__random_r random_r.c:357
__random random.c:293
__random random.c:293
__random random.c:291
__random random.c:291
__random random.c:291
__random random.c:288
rand rand.c:27
rand rand.c:26
rand@plt
rand@plt
compute_flag div.c:25
compute_flag div.c:22
main div.c:40
main div.c:40
Now we can see, following streams pair is moved to another section
"[ Hot chains in old perf data but source line changed (*) in new perf data ]"
cycles: 1, hits: 26.80% cycles: 1, hits: 27.30%
--------------------------- --------------------------
main div.c:39 main div.c:39*
main div.c:44 main div.c:44
v3:
---
v2 has 14 patches, it's hard to review.
v3 is only 7 patches for basic stream comparison.
Jin Yao (7):
perf util: Create source line mapping table
perf util: Create streams for managing top N hottest callchains
perf util: Return per-event callchain streams
perf util: Compare two streams
perf util: Calculate the sum of all streams hits
perf util: Report hot streams
perf diff: Support hot streams comparison
tools/perf/Documentation/perf-diff.txt | 14 +
tools/perf/builtin-diff.c | 170 +++++++-
tools/perf/util/Build | 1 +
tools/perf/util/callchain.c | 495 ++++++++++++++++++++++
tools/perf/util/callchain.h | 32 ++
tools/perf/util/srclist.c | 555 +++++++++++++++++++++++++
tools/perf/util/srclist.h | 65 +++
7 files changed, 1319 insertions(+), 13 deletions(-)
create mode 100644 tools/perf/util/srclist.c
create mode 100644 tools/perf/util/srclist.h
--
2.17.1
next reply other threads:[~2020-04-20 1:06 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-20 1:04 Jin Yao [this message]
2020-04-20 1:04 ` [PATCH v3 1/7] perf util: Create source line mapping table Jin Yao
2020-04-27 10:11 ` Jiri Olsa
2020-04-28 8:27 ` Jin, Yao
2020-04-20 1:04 ` [PATCH v3 2/7] perf util: Create streams for managing top N hottest callchains Jin Yao
2020-04-27 10:10 ` Jiri Olsa
2020-04-28 8:12 ` Jin, Yao
2020-04-20 1:04 ` [PATCH v3 3/7] perf util: Return per-event callchain streams Jin Yao
2020-04-20 1:04 ` [PATCH v3 4/7] perf util: Compare two streams Jin Yao
2020-04-20 1:04 ` [PATCH v3 5/7] perf util: Calculate the sum of all streams hits Jin Yao
2020-04-20 1:04 ` [PATCH v3 6/7] perf util: Report hot streams Jin Yao
2020-04-20 1:04 ` [PATCH v3 7/7] perf diff: Support hot streams comparison Jin Yao
2020-04-27 10:10 ` [PATCH v3 0/7] perf: Stream comparison Jiri Olsa
2020-04-28 8:10 ` Jin, Yao
2020-04-27 10:29 ` Jiri Olsa
2020-04-28 8:29 ` Jin, Yao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200420010451.24405-1-yao.jin@linux.intel.com \
--to=yao.jin@linux.intel.com \
--cc=Linux-kernel@vger.kernel.org \
--cc=acme@kernel.org \
--cc=ak@linux.intel.com \
--cc=alexander.shishkin@linux.intel.com \
--cc=jolsa@kernel.org \
--cc=kan.liang@intel.com \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=yao.jin@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox