From: Martijn Coenen <maco@android.com>
To: axboe@kernel.dk, hch@lst.de, ming.lei@redhat.com
Cc: narayan@google.com, zezeozue@google.com, kernel-team@android.com,
linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
maco@google.com, bvanassche@acm.org, Chaitanya.Kulkarni@wdc.com,
jaegeuk@kernel.org, Martijn Coenen <maco@android.com>
Subject: [PATCH v2 5/5] loop: Add LOOP_SET_FD_AND_STATUS ioctl
Date: Wed, 22 Apr 2020 12:06:36 +0200 [thread overview]
Message-ID: <20200422100636.46357-6-maco@android.com> (raw)
In-Reply-To: <20200422100636.46357-1-maco@android.com>
This allows userspace to completely setup a loop device with a single
ioctl, removing the in-between state where the device can be partially
configured - eg the loop device has a backing file associated with it,
but is reading from the wrong offset.
Besides removing the intermediate state, another big benefit of this
ioctl is that LOOP_SET_STATUS can be slow; the main reason for this
slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to
freeze the associated queue; this requires waiting for RCU
synchronization, which I've measured can take about 15-20ms on this
device on average.
Here's setting up ~70 regular loop devices with an offset on an x86
Android device, using LOOP_SET_FD and LOOP_SET_STATUS:
vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
0m03.40s real 0m00.02s user 0m00.03s system
Here's configuring ~70 devices in the same way, but using a modified
losetup that uses the new LOOP_SET_FD_AND_STATUS ioctl:
vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
0m01.94s real 0m00.01s user 0m00.01s system
Signed-off-by: Martijn Coenen <maco@android.com>
---
drivers/block/loop.c | 45 ++++++++++++++++++++++++++++-----------
include/uapi/linux/loop.h | 7 ++++++
2 files changed, 40 insertions(+), 12 deletions(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index b10f1d5306a2..4df1f03de27e 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1074,8 +1074,9 @@ loop_set_status_from_info(struct loop_device *lo,
return 0;
}
-static int loop_set_fd(struct loop_device *lo, fmode_t mode,
- struct block_device *bdev, unsigned int arg)
+static int loop_set_fd_and_status(struct loop_device *lo, fmode_t mode,
+ struct block_device *bdev, unsigned int fd,
+ const struct loop_info64 *info)
{
struct file *file;
struct inode *inode;
@@ -1090,7 +1091,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
__module_get(THIS_MODULE);
error = -EBADF;
- file = fget(arg);
+ file = fget(fd);
if (!file)
goto out;
@@ -1099,7 +1100,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
* here to avoid changing device under exclusive owner.
*/
if (!(mode & FMODE_EXCL)) {
- claimed_bdev = bd_start_claiming(bdev, loop_set_fd);
+ claimed_bdev = bd_start_claiming(bdev, loop_set_fd_and_status);
if (IS_ERR(claimed_bdev)) {
error = PTR_ERR(claimed_bdev);
goto out_putf;
@@ -1126,9 +1127,14 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
lo_flags |= LO_FLAGS_READ_ONLY;
error = -EFBIG;
- size = get_loop_size(lo, file);
+ size = get_size(info->lo_offset, info->lo_sizelimit, file);
if ((loff_t)(sector_t)size != size)
goto out_unlock;
+
+ error = loop_set_status_from_info(lo, info);
+ if (error)
+ goto out_unlock;
+
error = loop_prepare_queue(lo);
if (error)
goto out_unlock;
@@ -1141,9 +1147,6 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
lo->lo_device = bdev;
lo->lo_flags = lo_flags;
lo->lo_backing_file = file;
- lo->transfer = NULL;
- lo->ioctl = NULL;
- lo->lo_sizelimit = 0;
lo->old_gfp_mask = mapping_gfp_mask(mapping);
mapping_set_gfp_mask(mapping, lo->old_gfp_mask & ~(__GFP_IO|__GFP_FS));
@@ -1181,14 +1184,14 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
if (partscan)
loop_reread_partitions(lo, bdev);
if (claimed_bdev)
- bd_abort_claiming(bdev, claimed_bdev, loop_set_fd);
+ bd_abort_claiming(bdev, claimed_bdev, loop_set_fd_and_status);
return 0;
out_unlock:
mutex_unlock(&loop_ctl_mutex);
out_bdev:
if (claimed_bdev)
- bd_abort_claiming(bdev, claimed_bdev, loop_set_fd);
+ bd_abort_claiming(bdev, claimed_bdev, loop_set_fd_and_status);
out_putf:
fput(file);
out:
@@ -1662,8 +1665,25 @@ static int lo_ioctl(struct block_device *bdev, fmode_t mode,
int err;
switch (cmd) {
- case LOOP_SET_FD:
- return loop_set_fd(lo, mode, bdev, arg);
+ case LOOP_SET_FD: {
+ /* legacy case - pass in a zeroed out loop_info64, which
+ * corresponds with the default parameters we'd have used
+ * otherwise.
+ */
+ struct loop_info64 info;
+
+ memset(&info, 0, sizeof(info));
+ return loop_set_fd_and_status(lo, mode, bdev, arg, &info);
+ }
+ case LOOP_SET_FD_AND_STATUS: {
+ struct loop_fd_and_status fds;
+
+ if (copy_from_user(&fds, argp, sizeof(fds)))
+ return -EFAULT;
+
+ return loop_set_fd_and_status(lo, mode, bdev, fds.fd,
+ &fds.info);
+ }
case LOOP_CHANGE_FD:
return loop_change_fd(lo, bdev, arg);
case LOOP_CLR_FD:
@@ -1835,6 +1855,7 @@ static int lo_compat_ioctl(struct block_device *bdev, fmode_t mode,
case LOOP_CLR_FD:
case LOOP_GET_STATUS64:
case LOOP_SET_STATUS64:
+ case LOOP_SET_FD_AND_STATUS:
arg = (unsigned long) compat_ptr(arg);
/* fall through */
case LOOP_SET_FD:
diff --git a/include/uapi/linux/loop.h b/include/uapi/linux/loop.h
index 080a8df134ef..05ab625c40db 100644
--- a/include/uapi/linux/loop.h
+++ b/include/uapi/linux/loop.h
@@ -60,6 +60,12 @@ struct loop_info64 {
__u64 lo_init[2];
};
+struct loop_fd_and_status {
+ struct loop_info64 info;
+ __u32 fd;
+ __u32 __pad;
+};
+
/*
* Loop filter types
*/
@@ -90,6 +96,7 @@ struct loop_info64 {
#define LOOP_SET_CAPACITY 0x4C07
#define LOOP_SET_DIRECT_IO 0x4C08
#define LOOP_SET_BLOCK_SIZE 0x4C09
+#define LOOP_SET_FD_AND_STATUS 0x4C0A
/* /dev/loop-control interface */
#define LOOP_CTL_ADD 0x4C80
--
2.26.2.303.gf8c07b1a785-goog
next prev parent reply other threads:[~2020-04-22 10:55 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-22 10:06 [PATCH v2 0/5] Add a new LOOPSET_FD_AND_STATUS ioctl Martijn Coenen
2020-04-22 10:06 ` [PATCH v2 1/5] loop: Refactor size calculation Martijn Coenen
2020-04-22 17:39 ` Christoph Hellwig
2020-04-22 10:06 ` [PATCH v2 2/5] loop: Factor out configuring loop from status Martijn Coenen
2020-04-22 17:40 ` Christoph Hellwig
2020-04-22 10:06 ` [PATCH v2 3/5] loop: Move loop_set_status_from_info() and friends up Martijn Coenen
2020-04-22 17:40 ` Christoph Hellwig
2020-04-22 10:06 ` [PATCH v2 4/5] loop: rework lo_ioctl() __user argument casting Martijn Coenen
2020-04-22 17:41 ` Christoph Hellwig
2020-04-22 10:06 ` Martijn Coenen [this message]
2020-04-22 17:44 ` [PATCH v2 5/5] loop: Add LOOP_SET_FD_AND_STATUS ioctl Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200422100636.46357-6-maco@android.com \
--to=maco@android.com \
--cc=Chaitanya.Kulkarni@wdc.com \
--cc=axboe@kernel.dk \
--cc=bvanassche@acm.org \
--cc=hch@lst.de \
--cc=jaegeuk@kernel.org \
--cc=kernel-team@android.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maco@google.com \
--cc=ming.lei@redhat.com \
--cc=narayan@google.com \
--cc=zezeozue@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).