[PATCH V1 0/4] ARM: imx: move cpu code to drivers/soc/imx

peng.fan
2020-03-12T09:24:11Z

RFC version :
https://patchwork.kernel.org/cover/11336433/

Nothing changed in v1, just rename to formal patches

Shawn,
The original concern has been eliminated in RFC discussion,
so this patchset is ready to be in next.
Thanks.

Follow i.MX8, move the soc device register code to drivers/soc/imx
to simplify arch/arm/mach-imx/cpu.c

I planned to use similar logic as soc-imx8m.c to restructure soc-imx.c
and merged the two files into one. But not sure, so still keep
the logic in cpu.c.

There is one change is the platform devices are not under
/sys/devices/soc0 after patch 1/4. Actually ARM64 platform
devices are not under /sys/devices/soc0, such as i.MX8/8M.
So it should not hurt to let the platform devices under platform dir.

Peng Fan (4):
ARM: imx: use device_initcall for imx_soc_device_init
ARM: imx: cpu: drop dead code
ARM: imx: move cpu definitions into a header
soc: imx: move cpu code to drivers/soc/imx

arch/arm/mach-imx/common.h | 1 -
arch/arm/mach-imx/cpu.c | 159 ---------------------------------------
arch/arm/mach-imx/mach-imx6q.c | 8 +-
arch/arm/mach-imx/mach-imx6sl.c | 8 +-
arch/arm/mach-imx/mach-imx6sx.c | 8 +-
arch/arm/mach-imx/mach-imx6ul.c | 8 +-
arch/arm/mach-imx/mach-imx7d.c | 6 --
arch/arm/mach-imx/mach-imx7ulp.c | 2 +-
arch/arm/mach-imx/mxc.h | 22 +-----
drivers/soc/imx/Makefile | 3 +
drivers/soc/imx/soc-imx.c | 146 +++++++++++++++++++++++++++++++++++
include/soc/imx/cpu.h | 30 ++++++++
12 files changed, 185 insertions(+), 216 deletions(-)
create mode 100644 drivers/soc/imx/soc-imx.c
create mode 100644 include/soc/imx/cpu.h

--
2.16.4