From: Jiri Olsa <jolsa@redhat.com>
To: John Garry <john.garry@huawei.com>
Cc: Jin Yao <yao.jin@linux.intel.com>,
acme@kernel.org, jolsa@kernel.org, peterz@infradead.org,
mingo@redhat.com, alexander.shishkin@linux.intel.com,
Linux-kernel@vger.kernel.org, ak@linux.intel.com,
kan.liang@intel.com, yao.jin@intel.com
Subject: Re: [PATCH] perf parse-events: Use strcmp to compare the PMU name
Date: Thu, 30 Apr 2020 13:15:51 +0200 [thread overview]
Message-ID: <20200430111551.GC1694693@krava> (raw)
In-Reply-To: <66b84e3f-f7d8-bb65-616e-d159a509a439@huawei.com>
On Thu, Apr 30, 2020 at 09:54:18AM +0100, John Garry wrote:
> On 30/04/2020 09:45, Jiri Olsa wrote:
> > On Thu, Apr 30, 2020 at 08:36:18AM +0800, Jin Yao wrote:
> > > A big uncore event group is split into multiple small groups which
> > > only include the uncore events from the same PMU. This has been
> > > supported in the commit 3cdc5c2cb924a ("perf parse-events: Handle
> > > uncore event aliases in small groups properly").
> > >
> > > If the event's PMU name starts to repeat, it must be a new event.
> > > That can be used to distinguish the leader from other members.
> > > But now it only compares the pointer of pmu_name
> > > (leader->pmu_name == evsel->pmu_name).
> > >
> > > If we use "perf stat -M LLC_MISSES.PCIE_WRITE -a" on cascadelakex,
> > > the event list is:
> > >
> > > evsel->name evsel->pmu_name
> > > ---------------------------------------------------------------
> > > unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_4 (as leader)
> > > unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_2
> > > unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_0
> > > unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_5
> > > unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_3
> > > unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_1
> > > unc_iio_data_req_of_cpu.mem_write.part1 uncore_iio_4
> > > ......
> > >
> > > For the event "unc_iio_data_req_of_cpu.mem_write.part1" with
> > > "uncore_iio_4", it should be the event from PMU "uncore_iio_4".
> > > It's not a new leader for this PMU.
> > >
> > > But if we use "(leader->pmu_name == evsel->pmu_name)", the check
> > > would be failed and the event is stored to leaders[] as a new
> > > PMU leader.
> > >
> > > So this patch uses strcmp to compare the PMU name between events.
> > >
> > > Fixes: 3cdc5c2cb924a ("perf parse-events: Handle uncore event aliases in small groups properly")
> > > Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
> >
> > looks good, any chance we could have automated test
> > for this uncore leader setup logic? like maybe the way
> > John did the pmu-events tests? like test will trigger
> > only when there's the pmu/events in the system
> >
> > Acked-by: Jiri Olsa <jolsa@redhat.com>
> >
> > thanks,
> > jirka
>
> Hi jirka,
>
> JFYI, this is effectively the same patch as I mentioned to you, which was a
> fix for the same WARN:
>
> https://lore.kernel.org/linux-arm-kernel/1587120084-18990-2-git-send-email-john.garry@huawei.com/
>
> but I found that it "fixed" d4953f7ef1a2 ("perf parse-events: Fix 3 use
> after frees found with clang ASANutil/parse-events.c"), based on bisect
> breakage
hum right.. sorry I did not recalled that, there's
also the warn removal in here, could you guys also
plz sync on the fixes clauses?
thanks,
jirka
>
> cheers
>
> >
> >
> > > ---
> > > tools/perf/util/parse-events.c | 5 ++---
> > > 1 file changed, 2 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
> > > index 10107747b361..786eddb6a097 100644
> > > --- a/tools/perf/util/parse-events.c
> > > +++ b/tools/perf/util/parse-events.c
> > > @@ -1629,12 +1629,11 @@ parse_events__set_leader_for_uncore_aliase(char *name, struct list_head *list,
> > > * event. That can be used to distinguish the leader from
> > > * other members, even they have the same event name.
> > > */
> > > - if ((leader != evsel) && (leader->pmu_name == evsel->pmu_name)) {
> > > + if ((leader != evsel) &&
> > > + !strcmp(leader->pmu_name, evsel->pmu_name)) {
> > > is_leader = false;
> > > continue;
> > > }
> > > - /* The name is always alias name */
> > > - WARN_ON(strcmp(leader->name, evsel->name));
> > > /* Store the leader event for each PMU */
> > > leaders[nr_pmu++] = (uintptr_t) evsel;
> > > --
> > > 2.17.1
> > >
> >
> > .
> >
>
next prev parent reply other threads:[~2020-04-30 11:16 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-30 0:36 [PATCH] perf parse-events: Use strcmp to compare the PMU name Jin Yao
2020-04-30 8:45 ` Jiri Olsa
2020-04-30 8:54 ` John Garry
2020-04-30 11:15 ` Jiri Olsa [this message]
2020-04-30 11:48 ` John Garry
2020-04-30 13:38 ` Jin, Yao
2020-05-07 16:46 ` Arnaldo Carvalho de Melo
2020-05-07 17:24 ` Ian Rogers
2020-04-30 13:45 ` Jin, Yao
2020-04-30 15:32 ` Jiri Olsa
2020-05-06 22:45 ` Ian Rogers
2020-05-06 23:46 ` Arnaldo Carvalho de Melo
2020-05-07 16:44 ` Arnaldo Carvalho de Melo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200430111551.GC1694693@krava \
--to=jolsa@redhat.com \
--cc=Linux-kernel@vger.kernel.org \
--cc=acme@kernel.org \
--cc=ak@linux.intel.com \
--cc=alexander.shishkin@linux.intel.com \
--cc=john.garry@huawei.com \
--cc=jolsa@kernel.org \
--cc=kan.liang@intel.com \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=yao.jin@intel.com \
--cc=yao.jin@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox