From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Syed Nayyar Waris <syednwaris@gmail.com>,
William Breathitt Gray <vilhelm.gray@gmail.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH AUTOSEL 5.6 44/79] counter: 104-quad-8: Add lock guards - generic interface
Date: Thu, 30 Apr 2020 09:50:08 -0400 [thread overview]
Message-ID: <20200430135043.19851-44-sashal@kernel.org> (raw)
In-Reply-To: <20200430135043.19851-1-sashal@kernel.org>
From: Syed Nayyar Waris <syednwaris@gmail.com>
[ Upstream commit fc069262261c43ed11d639dadcf982e79bfe652b ]
Add lock protection from race conditions to 104-quad-8 counter driver
generic interface code changes. Mutex calls used for protection.
Fixes: f1d8a071d45b ("counter: 104-quad-8: Add Generic Counter interface support")
Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/counter/104-quad-8.c | 194 +++++++++++++++++++++++++++++------
1 file changed, 160 insertions(+), 34 deletions(-)
diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c
index 17e67a84777d3..dd0a57f809882 100644
--- a/drivers/counter/104-quad-8.c
+++ b/drivers/counter/104-quad-8.c
@@ -42,6 +42,7 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
* @base: base port address of the IIO device
*/
struct quad8_iio {
+ struct mutex lock;
struct counter_device counter;
unsigned int preset[QUAD8_NUM_COUNTERS];
unsigned int count_mode[QUAD8_NUM_COUNTERS];
@@ -116,6 +117,8 @@ static int quad8_read_raw(struct iio_dev *indio_dev,
/* Borrow XOR Carry effectively doubles count range */
*val = (borrow ^ carry) << 24;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer; transfer Counter to Output Latch */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
base_offset + 1);
@@ -123,6 +126,8 @@ static int quad8_read_raw(struct iio_dev *indio_dev,
for (i = 0; i < 3; i++)
*val |= (unsigned int)inb(base_offset) << (8 * i);
+ mutex_unlock(&priv->lock);
+
return IIO_VAL_INT;
case IIO_CHAN_INFO_ENABLE:
*val = priv->ab_enable[chan->channel];
@@ -153,6 +158,8 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
if ((unsigned int)val > 0xFFFFFF)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
@@ -176,12 +183,16 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
/* Reset Error flag */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return 0;
case IIO_CHAN_INFO_ENABLE:
/* only boolean values accepted */
if (val < 0 || val > 1)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
priv->ab_enable[chan->channel] = val;
ior_cfg = val | priv->preset_enable[chan->channel] << 1;
@@ -189,11 +200,18 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
/* Load I/O control configuration */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return 0;
case IIO_CHAN_INFO_SCALE:
+ mutex_lock(&priv->lock);
+
/* Quadrature scaling only available in quadrature mode */
- if (!priv->quadrature_mode[chan->channel] && (val2 || val != 1))
+ if (!priv->quadrature_mode[chan->channel] &&
+ (val2 || val != 1)) {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
/* Only three gain states (1, 0.5, 0.25) */
if (val == 1 && !val2)
@@ -207,11 +225,15 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
priv->quadrature_scale[chan->channel] = 2;
break;
default:
+ mutex_unlock(&priv->lock);
return -EINVAL;
}
- else
+ else {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
+ mutex_unlock(&priv->lock);
return 0;
}
@@ -248,6 +270,8 @@ static ssize_t quad8_write_preset(struct iio_dev *indio_dev, uintptr_t private,
if (preset > 0xFFFFFF)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
priv->preset[chan->channel] = preset;
/* Reset Byte Pointer */
@@ -257,6 +281,8 @@ static ssize_t quad8_write_preset(struct iio_dev *indio_dev, uintptr_t private,
for (i = 0; i < 3; i++)
outb(preset >> (8 * i), base_offset);
+ mutex_unlock(&priv->lock);
+
return len;
}
@@ -286,6 +312,8 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
/* Preset enable is active low in Input/Output Control register */
preset_enable = !preset_enable;
+ mutex_lock(&priv->lock);
+
priv->preset_enable[chan->channel] = preset_enable;
ior_cfg = priv->ab_enable[chan->channel] |
@@ -294,6 +322,8 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
/* Load I/O control configuration to Input / Output Control Register */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return len;
}
@@ -351,6 +381,8 @@ static int quad8_set_count_mode(struct iio_dev *indio_dev,
unsigned int mode_cfg = cnt_mode << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ mutex_lock(&priv->lock);
+
priv->count_mode[chan->channel] = cnt_mode;
/* Add quadrature mode configuration */
@@ -360,6 +392,8 @@ static int quad8_set_count_mode(struct iio_dev *indio_dev,
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -387,19 +421,26 @@ static int quad8_set_synchronous_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, unsigned int synchronous_mode)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- const unsigned int idr_cfg = synchronous_mode |
- priv->index_polarity[chan->channel] << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ unsigned int idr_cfg = synchronous_mode;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->index_polarity[chan->channel] << 1;
/* Index function must be non-synchronous in non-quadrature mode */
- if (synchronous_mode && !priv->quadrature_mode[chan->channel])
+ if (synchronous_mode && !priv->quadrature_mode[chan->channel]) {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
priv->synchronous_mode[chan->channel] = synchronous_mode;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -427,8 +468,12 @@ static int quad8_set_quadrature_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, unsigned int quadrature_mode)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- unsigned int mode_cfg = priv->count_mode[chan->channel] << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ unsigned int mode_cfg;
+
+ mutex_lock(&priv->lock);
+
+ mode_cfg = priv->count_mode[chan->channel] << 1;
if (quadrature_mode)
mode_cfg |= (priv->quadrature_scale[chan->channel] + 1) << 3;
@@ -446,6 +491,8 @@ static int quad8_set_quadrature_mode(struct iio_dev *indio_dev,
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -473,15 +520,20 @@ static int quad8_set_index_polarity(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, unsigned int index_polarity)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- const unsigned int idr_cfg = priv->synchronous_mode[chan->channel] |
- index_polarity << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ unsigned int idr_cfg = index_polarity << 1;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->synchronous_mode[chan->channel];
priv->index_polarity[chan->channel] = index_polarity;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -582,7 +634,7 @@ static int quad8_signal_read(struct counter_device *counter,
static int quad8_count_read(struct counter_device *counter,
struct counter_count *count, unsigned long *val)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
unsigned int flags;
unsigned int borrow;
@@ -596,6 +648,8 @@ static int quad8_count_read(struct counter_device *counter,
/* Borrow XOR Carry effectively doubles count range */
*val = (unsigned long)(borrow ^ carry) << 24;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer; transfer Counter to Output Latch */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
base_offset + 1);
@@ -603,13 +657,15 @@ static int quad8_count_read(struct counter_device *counter,
for (i = 0; i < 3; i++)
*val |= (unsigned long)inb(base_offset) << (8 * i);
+ mutex_unlock(&priv->lock);
+
return 0;
}
static int quad8_count_write(struct counter_device *counter,
struct counter_count *count, unsigned long val)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
int i;
@@ -617,6 +673,8 @@ static int quad8_count_write(struct counter_device *counter,
if (val > 0xFFFFFF)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
@@ -640,6 +698,8 @@ static int quad8_count_write(struct counter_device *counter,
/* Reset Error flag */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -660,13 +720,13 @@ static enum counter_count_function quad8_count_functions_list[] = {
static int quad8_function_get(struct counter_device *counter,
struct counter_count *count, size_t *function)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
const int id = count->id;
- const unsigned int quadrature_mode = priv->quadrature_mode[id];
- const unsigned int scale = priv->quadrature_scale[id];
- if (quadrature_mode)
- switch (scale) {
+ mutex_lock(&priv->lock);
+
+ if (priv->quadrature_mode[id])
+ switch (priv->quadrature_scale[id]) {
case 0:
*function = QUAD8_COUNT_FUNCTION_QUADRATURE_X1;
break;
@@ -680,6 +740,8 @@ static int quad8_function_get(struct counter_device *counter,
else
*function = QUAD8_COUNT_FUNCTION_PULSE_DIRECTION;
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -690,10 +752,15 @@ static int quad8_function_set(struct counter_device *counter,
const int id = count->id;
unsigned int *const quadrature_mode = priv->quadrature_mode + id;
unsigned int *const scale = priv->quadrature_scale + id;
- unsigned int mode_cfg = priv->count_mode[id] << 1;
unsigned int *const synchronous_mode = priv->synchronous_mode + id;
- const unsigned int idr_cfg = priv->index_polarity[id] << 1;
const int base_offset = priv->base + 2 * id + 1;
+ unsigned int mode_cfg;
+ unsigned int idr_cfg;
+
+ mutex_lock(&priv->lock);
+
+ mode_cfg = priv->count_mode[id] << 1;
+ idr_cfg = priv->index_polarity[id] << 1;
if (function == QUAD8_COUNT_FUNCTION_PULSE_DIRECTION) {
*quadrature_mode = 0;
@@ -729,6 +796,8 @@ static int quad8_function_set(struct counter_device *counter,
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -845,15 +914,20 @@ static int quad8_index_polarity_set(struct counter_device *counter,
{
struct quad8_iio *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
- const unsigned int idr_cfg = priv->synchronous_mode[channel_id] |
- index_polarity << 1;
const int base_offset = priv->base + 2 * channel_id + 1;
+ unsigned int idr_cfg = index_polarity << 1;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->synchronous_mode[channel_id];
priv->index_polarity[channel_id] = index_polarity;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -880,19 +954,26 @@ static int quad8_synchronous_mode_set(struct counter_device *counter,
{
struct quad8_iio *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
- const unsigned int idr_cfg = synchronous_mode |
- priv->index_polarity[channel_id] << 1;
const int base_offset = priv->base + 2 * channel_id + 1;
+ unsigned int idr_cfg = synchronous_mode;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->index_polarity[channel_id] << 1;
/* Index function must be non-synchronous in non-quadrature mode */
- if (synchronous_mode && !priv->quadrature_mode[channel_id])
+ if (synchronous_mode && !priv->quadrature_mode[channel_id]) {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
priv->synchronous_mode[channel_id] = synchronous_mode;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -957,6 +1038,8 @@ static int quad8_count_mode_set(struct counter_device *counter,
break;
}
+ mutex_lock(&priv->lock);
+
priv->count_mode[count->id] = cnt_mode;
/* Set count mode configuration value */
@@ -969,6 +1052,8 @@ static int quad8_count_mode_set(struct counter_device *counter,
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -1010,6 +1095,8 @@ static ssize_t quad8_count_enable_write(struct counter_device *counter,
if (err)
return err;
+ mutex_lock(&priv->lock);
+
priv->ab_enable[count->id] = ab_enable;
ior_cfg = ab_enable | priv->preset_enable[count->id] << 1;
@@ -1017,6 +1104,8 @@ static ssize_t quad8_count_enable_write(struct counter_device *counter,
/* Load I/O control configuration */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return len;
}
@@ -1045,14 +1134,28 @@ static ssize_t quad8_count_preset_read(struct counter_device *counter,
return sprintf(buf, "%u\n", priv->preset[count->id]);
}
+static void quad8_preset_register_set(struct quad8_iio *quad8iio, int id,
+ unsigned int preset)
+{
+ const unsigned int base_offset = quad8iio->base + 2 * id;
+ int i;
+
+ quad8iio->preset[id] = preset;
+
+ /* Reset Byte Pointer */
+ outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+
+ /* Set Preset Register */
+ for (i = 0; i < 3; i++)
+ outb(preset >> (8 * i), base_offset);
+}
+
static ssize_t quad8_count_preset_write(struct counter_device *counter,
struct counter_count *count, void *private, const char *buf, size_t len)
{
struct quad8_iio *const priv = counter->priv;
- const int base_offset = priv->base + 2 * count->id;
unsigned int preset;
int ret;
- int i;
ret = kstrtouint(buf, 0, &preset);
if (ret)
@@ -1062,14 +1165,11 @@ static ssize_t quad8_count_preset_write(struct counter_device *counter,
if (preset > 0xFFFFFF)
return -EINVAL;
- priv->preset[count->id] = preset;
+ mutex_lock(&priv->lock);
- /* Reset Byte Pointer */
- outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+ quad8_preset_register_set(priv, count->id, preset);
- /* Set Preset Register */
- for (i = 0; i < 3; i++)
- outb(preset >> (8 * i), base_offset);
+ mutex_unlock(&priv->lock);
return len;
}
@@ -1077,15 +1177,20 @@ static ssize_t quad8_count_preset_write(struct counter_device *counter,
static ssize_t quad8_count_ceiling_read(struct counter_device *counter,
struct counter_count *count, void *private, char *buf)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
+
+ mutex_lock(&priv->lock);
/* Range Limit and Modulo-N count modes use preset value as ceiling */
switch (priv->count_mode[count->id]) {
case 1:
case 3:
- return quad8_count_preset_read(counter, count, private, buf);
+ mutex_unlock(&priv->lock);
+ return sprintf(buf, "%u\n", priv->preset[count->id]);
}
+ mutex_unlock(&priv->lock);
+
/* By default 0x1FFFFFF (25 bits unsigned) is maximum count */
return sprintf(buf, "33554431\n");
}
@@ -1094,15 +1199,29 @@ static ssize_t quad8_count_ceiling_write(struct counter_device *counter,
struct counter_count *count, void *private, const char *buf, size_t len)
{
struct quad8_iio *const priv = counter->priv;
+ unsigned int ceiling;
+ int ret;
+
+ ret = kstrtouint(buf, 0, &ceiling);
+ if (ret)
+ return ret;
+
+ /* Only 24-bit values are supported */
+ if (ceiling > 0xFFFFFF)
+ return -EINVAL;
+
+ mutex_lock(&priv->lock);
/* Range Limit and Modulo-N count modes use preset value as ceiling */
switch (priv->count_mode[count->id]) {
case 1:
case 3:
- return quad8_count_preset_write(counter, count, private, buf,
- len);
+ quad8_preset_register_set(priv, count->id, ceiling);
+ break;
}
+ mutex_unlock(&priv->lock);
+
return len;
}
@@ -1130,6 +1249,8 @@ static ssize_t quad8_count_preset_enable_write(struct counter_device *counter,
/* Preset enable is active low in Input/Output Control register */
preset_enable = !preset_enable;
+ mutex_lock(&priv->lock);
+
priv->preset_enable[count->id] = preset_enable;
ior_cfg = priv->ab_enable[count->id] | (unsigned int)preset_enable << 1;
@@ -1137,6 +1258,8 @@ static ssize_t quad8_count_preset_enable_write(struct counter_device *counter,
/* Load I/O control configuration to Input / Output Control Register */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return len;
}
@@ -1307,6 +1430,9 @@ static int quad8_probe(struct device *dev, unsigned int id)
quad8iio->counter.priv = quad8iio;
quad8iio->base = base[id];
+ /* Initialize mutex */
+ mutex_init(&quad8iio->lock);
+
/* Reset all counters and disable interrupt function */
outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
/* Set initial configuration for all counters */
--
2.20.1
next prev parent reply other threads:[~2020-04-30 14:09 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-30 13:49 [PATCH AUTOSEL 5.6 01/79] ARM: dts: OMAP3: disable RNG on N950/N9 Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 02/79] drm/bridge: analogix_dp: Split bind() into probe() and real bind() Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 03/79] ARM: dts: bcm283x: Add cells encoding format to firmware bus Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 04/79] iio:ad7797: Use correct attribute_group Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 05/79] iio: imu: st_lsm6dsx: fix read misalignment on untagged FIFO Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 06/79] iio: imu: st_lsm6dsx: specify slave odr in slv_odr Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 07/79] ASoC: topology: Add missing memory checks Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 08/79] ASoC: topology: Check return value of soc_tplg_create_tlv Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 09/79] ASoC: topology: Check return value of soc_tplg_*_create Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 10/79] ASoC: topology: Check soc_tplg_add_route return value Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 11/79] ASoC: topology: Check return value of pcm_new_ver Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 12/79] ASoC: topology: Check return value of soc_tplg_dai_config Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 13/79] nfsd: memory corruption in nfsd4_lock() Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 14/79] SUNRPC/cache: Fix unsafe traverse caused double-free in cache_purge Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 15/79] selftests: vm: Do not override definition of ARCH Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 16/79] selftests: vm: Fix 64-bit test builds for powerpc64le Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 17/79] ASoC: samsung: s3c24xx-i2s: Fix build after removal of DAI suspend/resume Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 18/79] Revert "Kernel selftests: tpm2: check for tpm support" Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 19/79] selftests/ipc: Fix test failure seen after initial test run Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 20/79] drm/bridge: anx6345: set correct BPC for display_info of connector Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 21/79] scsi: sg: add sg_remove_request in sg_write Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 22/79] drivers: soc: xilinx: fix firmware driver Kconfig dependency Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 23/79] drm/scheduler: fix drm_sched_get_cleanup_job Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 24/79] ASoC: sgtl5000: Fix VAG power-on handling Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 25/79] ASoC: q6dsp6: q6afe-dai: add missing channels to MI2S DAIs Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 26/79] ASoC: topology: Fix endianness issue Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 27/79] usb: dwc3: gadget: Properly set maxpacket limit Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 28/79] usb: dwc3: gadget: Do link recovery for SS and SSP Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 29/79] ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 30/79] ASoC: rsnd: Fix HDMI channel mapping for " Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 31/79] ASoC: codecs: hdac_hdmi: Fix incorrect use of list_for_each_entry Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 32/79] ARM: dts: bcm283x: Disable dsi0 node Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 33/79] remoteproc: qcom_q6v5_mss: fix a bug in q6v5_probe() Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 34/79] usb: gadget: udc: atmel: Fix vbus disconnect handling Sasha Levin
2020-04-30 13:49 ` [PATCH AUTOSEL 5.6 35/79] svcrdma: Fix trace point use-after-free race Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 36/79] ASoC: stm32: sai: fix sai probe Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 37/79] ASoC: SOF: Intel: add min/max channels for SSP on Baytrail/Broadwell Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 38/79] drm/amd/powerplay: fix resume failed as smu table initialize early exit Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 39/79] drm/amdgpu: Correctly initialize thermal controller for GPUs with Powerplay table v0 (e.g Hawaii) Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 40/79] wimax/i2400m: Fix potential urb refcnt leak Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 41/79] net: stmmac: fix enabling socfpga's ptp_ref_clock Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 42/79] net: stmmac: Fix sub-second increment Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 43/79] netfilter: nat: fix error handling upon registering inet hook Sasha Levin
2020-04-30 13:50 ` Sasha Levin [this message]
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 45/79] ASoC: meson: axg-card: fix codec-to-codec link setup Sasha Levin
2020-04-30 13:56 ` Mark Brown
2020-05-02 13:46 ` Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 46/79] ASoC: rsnd: Don't treat master SSI in multi SSI setup as parent Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 47/79] ASoC: rsnd: Fix "status check failed" spam for multi-SSI Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 48/79] net/mlx5: Fix failing fw tracer allocation on s390 Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 49/79] net/mlx5e: Don't trigger IRQ multiple times on XSK wakeup to avoid WQ overruns Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 50/79] net/mlx5e: Get the latest values from counters in switchdev mode Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 51/79] cpumap: Avoid warning when CONFIG_DEBUG_PER_CPU_MAPS is enabled Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 52/79] bpf: Forbid XADD on spilled pointers for unprivileged users Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 53/79] bpf: Fix handling of XADD on BTF memory Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 54/79] bpf, x86: Fix encoding for lower 8-bit registers in BPF_STX BPF_B Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 55/79] iwlwifi: actually check allocated conf_tlv pointer Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 56/79] ASoC: wm8960: Fix wrong clock after suspend & resume Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 57/79] cifs: protect updating server->dstaddr with a spinlock Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 58/79] blk-iocost: Fix error on iocost_ioc_vrate_adj Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 59/79] s390/ftrace: fix potential crashes when switching tracers Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 60/79] scripts/config: allow colons in option strings for sed Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 61/79] sched/core: Fix reset-on-fork from RT with uclamp Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 62/79] perf/core: fix parent pid/tid in task exit events Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 63/79] cifs: do not share tcons with DFS Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 64/79] tracing: Fix memory leaks in trace_events_hist.c Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 65/79] um: ensure `make ARCH=um mrproper` removes arch/$(SUBARCH)/include/generated/ Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 66/79] ftrace: Fix memory leak caused by not freeing entry in unregister_ftrace_direct() Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 67/79] net: phy: bcm84881: clear settings on link down Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 68/79] lib/mpi: Fix building for powerpc with clang Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 69/79] mac80211: sta_info: Add lockdep condition for RCU list usage Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 70/79] afs: Fix to actually set AFS_SERVER_FL_HAVE_EPOCH Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 71/79] afs: Make record checking use TASK_UNINTERRUPTIBLE when appropriate Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 72/79] net: bcmgenet: suppress warnings on failed Rx SKB allocations Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 73/79] net: systemport: " Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 74/79] bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 75/79] bpf, x86_32: Fix clobbering of dst for BPF_JSET Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 76/79] bpf, x86_32: Fix logic error in BPF_LDX zero-extension Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 77/79] bpf: Propagate expected_attach_type when verifying freplace programs Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 78/79] tools/runqslower: Ensure own vmlinux.h is picked up first Sasha Levin
2020-04-30 13:50 ` [PATCH AUTOSEL 5.6 79/79] selftests/bpf: Fix a couple of broken test_btf cases Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200430135043.19851-44-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=syednwaris@gmail.com \
--cc=vilhelm.gray@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox