public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Syed Nayyar Waris <syednwaris@gmail.com>,
	William Breathitt Gray <vilhelm.gray@gmail.com>,
	Jonathan Cameron <Jonathan.Cameron@huawei.com>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH AUTOSEL 5.4 30/57] counter: 104-quad-8: Add lock guards - generic interface
Date: Thu, 30 Apr 2020 09:51:51 -0400	[thread overview]
Message-ID: <20200430135218.20372-30-sashal@kernel.org> (raw)
In-Reply-To: <20200430135218.20372-1-sashal@kernel.org>

From: Syed Nayyar Waris <syednwaris@gmail.com>

[ Upstream commit fc069262261c43ed11d639dadcf982e79bfe652b ]

Add lock protection from race conditions to 104-quad-8 counter driver
generic interface code changes. Mutex calls used for protection.

Fixes: f1d8a071d45b ("counter: 104-quad-8: Add Generic Counter interface support")

Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/counter/104-quad-8.c | 194 +++++++++++++++++++++++++++++------
 1 file changed, 160 insertions(+), 34 deletions(-)

diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c
index 00b113f4b9588..5c23a9a56921b 100644
--- a/drivers/counter/104-quad-8.c
+++ b/drivers/counter/104-quad-8.c
@@ -42,6 +42,7 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
  * @base:		base port address of the IIO device
  */
 struct quad8_iio {
+	struct mutex lock;
 	struct counter_device counter;
 	unsigned int preset[QUAD8_NUM_COUNTERS];
 	unsigned int count_mode[QUAD8_NUM_COUNTERS];
@@ -116,6 +117,8 @@ static int quad8_read_raw(struct iio_dev *indio_dev,
 		/* Borrow XOR Carry effectively doubles count range */
 		*val = (borrow ^ carry) << 24;
 
+		mutex_lock(&priv->lock);
+
 		/* Reset Byte Pointer; transfer Counter to Output Latch */
 		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
 		     base_offset + 1);
@@ -123,6 +126,8 @@ static int quad8_read_raw(struct iio_dev *indio_dev,
 		for (i = 0; i < 3; i++)
 			*val |= (unsigned int)inb(base_offset) << (8 * i);
 
+		mutex_unlock(&priv->lock);
+
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_ENABLE:
 		*val = priv->ab_enable[chan->channel];
@@ -153,6 +158,8 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
 		if ((unsigned int)val > 0xFFFFFF)
 			return -EINVAL;
 
+		mutex_lock(&priv->lock);
+
 		/* Reset Byte Pointer */
 		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
 
@@ -176,12 +183,16 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
 		/* Reset Error flag */
 		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
 
+		mutex_unlock(&priv->lock);
+
 		return 0;
 	case IIO_CHAN_INFO_ENABLE:
 		/* only boolean values accepted */
 		if (val < 0 || val > 1)
 			return -EINVAL;
 
+		mutex_lock(&priv->lock);
+
 		priv->ab_enable[chan->channel] = val;
 
 		ior_cfg = val | priv->preset_enable[chan->channel] << 1;
@@ -189,11 +200,18 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
 		/* Load I/O control configuration */
 		outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
 
+		mutex_unlock(&priv->lock);
+
 		return 0;
 	case IIO_CHAN_INFO_SCALE:
+		mutex_lock(&priv->lock);
+
 		/* Quadrature scaling only available in quadrature mode */
-		if (!priv->quadrature_mode[chan->channel] && (val2 || val != 1))
+		if (!priv->quadrature_mode[chan->channel] &&
+				(val2 || val != 1)) {
+			mutex_unlock(&priv->lock);
 			return -EINVAL;
+		}
 
 		/* Only three gain states (1, 0.5, 0.25) */
 		if (val == 1 && !val2)
@@ -207,11 +225,15 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
 				priv->quadrature_scale[chan->channel] = 2;
 				break;
 			default:
+				mutex_unlock(&priv->lock);
 				return -EINVAL;
 			}
-		else
+		else {
+			mutex_unlock(&priv->lock);
 			return -EINVAL;
+		}
 
+		mutex_unlock(&priv->lock);
 		return 0;
 	}
 
@@ -248,6 +270,8 @@ static ssize_t quad8_write_preset(struct iio_dev *indio_dev, uintptr_t private,
 	if (preset > 0xFFFFFF)
 		return -EINVAL;
 
+	mutex_lock(&priv->lock);
+
 	priv->preset[chan->channel] = preset;
 
 	/* Reset Byte Pointer */
@@ -257,6 +281,8 @@ static ssize_t quad8_write_preset(struct iio_dev *indio_dev, uintptr_t private,
 	for (i = 0; i < 3; i++)
 		outb(preset >> (8 * i), base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -286,6 +312,8 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
 	/* Preset enable is active low in Input/Output Control register */
 	preset_enable = !preset_enable;
 
+	mutex_lock(&priv->lock);
+
 	priv->preset_enable[chan->channel] = preset_enable;
 
 	ior_cfg = priv->ab_enable[chan->channel] |
@@ -294,6 +322,8 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
 	/* Load I/O control configuration to Input / Output Control Register */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -351,6 +381,8 @@ static int quad8_set_count_mode(struct iio_dev *indio_dev,
 	unsigned int mode_cfg = cnt_mode << 1;
 	const int base_offset = priv->base + 2 * chan->channel + 1;
 
+	mutex_lock(&priv->lock);
+
 	priv->count_mode[chan->channel] = cnt_mode;
 
 	/* Add quadrature mode configuration */
@@ -360,6 +392,8 @@ static int quad8_set_count_mode(struct iio_dev *indio_dev,
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -387,19 +421,26 @@ static int quad8_set_synchronous_mode(struct iio_dev *indio_dev,
 	const struct iio_chan_spec *chan, unsigned int synchronous_mode)
 {
 	struct quad8_iio *const priv = iio_priv(indio_dev);
-	const unsigned int idr_cfg = synchronous_mode |
-		priv->index_polarity[chan->channel] << 1;
 	const int base_offset = priv->base + 2 * chan->channel + 1;
+	unsigned int idr_cfg = synchronous_mode;
+
+	mutex_lock(&priv->lock);
+
+	idr_cfg |= priv->index_polarity[chan->channel] << 1;
 
 	/* Index function must be non-synchronous in non-quadrature mode */
-	if (synchronous_mode && !priv->quadrature_mode[chan->channel])
+	if (synchronous_mode && !priv->quadrature_mode[chan->channel]) {
+		mutex_unlock(&priv->lock);
 		return -EINVAL;
+	}
 
 	priv->synchronous_mode[chan->channel] = synchronous_mode;
 
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -427,8 +468,12 @@ static int quad8_set_quadrature_mode(struct iio_dev *indio_dev,
 	const struct iio_chan_spec *chan, unsigned int quadrature_mode)
 {
 	struct quad8_iio *const priv = iio_priv(indio_dev);
-	unsigned int mode_cfg = priv->count_mode[chan->channel] << 1;
 	const int base_offset = priv->base + 2 * chan->channel + 1;
+	unsigned int mode_cfg;
+
+	mutex_lock(&priv->lock);
+
+	mode_cfg = priv->count_mode[chan->channel] << 1;
 
 	if (quadrature_mode)
 		mode_cfg |= (priv->quadrature_scale[chan->channel] + 1) << 3;
@@ -446,6 +491,8 @@ static int quad8_set_quadrature_mode(struct iio_dev *indio_dev,
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -473,15 +520,20 @@ static int quad8_set_index_polarity(struct iio_dev *indio_dev,
 	const struct iio_chan_spec *chan, unsigned int index_polarity)
 {
 	struct quad8_iio *const priv = iio_priv(indio_dev);
-	const unsigned int idr_cfg = priv->synchronous_mode[chan->channel] |
-		index_polarity << 1;
 	const int base_offset = priv->base + 2 * chan->channel + 1;
+	unsigned int idr_cfg = index_polarity << 1;
+
+	mutex_lock(&priv->lock);
+
+	idr_cfg |= priv->synchronous_mode[chan->channel];
 
 	priv->index_polarity[chan->channel] = index_polarity;
 
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -585,7 +637,7 @@ static int quad8_signal_read(struct counter_device *counter,
 static int quad8_count_read(struct counter_device *counter,
 	struct counter_count *count, struct counter_count_read_value *val)
 {
-	const struct quad8_iio *const priv = counter->priv;
+	struct quad8_iio *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
 	unsigned int flags;
 	unsigned int borrow;
@@ -600,6 +652,8 @@ static int quad8_count_read(struct counter_device *counter,
 	/* Borrow XOR Carry effectively doubles count range */
 	position = (unsigned long)(borrow ^ carry) << 24;
 
+	mutex_lock(&priv->lock);
+
 	/* Reset Byte Pointer; transfer Counter to Output Latch */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
 	     base_offset + 1);
@@ -609,13 +663,15 @@ static int quad8_count_read(struct counter_device *counter,
 
 	counter_count_read_value_set(val, COUNTER_COUNT_POSITION, &position);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
 static int quad8_count_write(struct counter_device *counter,
 	struct counter_count *count, struct counter_count_write_value *val)
 {
-	const struct quad8_iio *const priv = counter->priv;
+	struct quad8_iio *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
 	int err;
 	unsigned long position;
@@ -630,6 +686,8 @@ static int quad8_count_write(struct counter_device *counter,
 	if (position > 0xFFFFFF)
 		return -EINVAL;
 
+	mutex_lock(&priv->lock);
+
 	/* Reset Byte Pointer */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
 
@@ -653,6 +711,8 @@ static int quad8_count_write(struct counter_device *counter,
 	/* Reset Error flag */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -673,13 +733,13 @@ static enum counter_count_function quad8_count_functions_list[] = {
 static int quad8_function_get(struct counter_device *counter,
 	struct counter_count *count, size_t *function)
 {
-	const struct quad8_iio *const priv = counter->priv;
+	struct quad8_iio *const priv = counter->priv;
 	const int id = count->id;
-	const unsigned int quadrature_mode = priv->quadrature_mode[id];
-	const unsigned int scale = priv->quadrature_scale[id];
 
-	if (quadrature_mode)
-		switch (scale) {
+	mutex_lock(&priv->lock);
+
+	if (priv->quadrature_mode[id])
+		switch (priv->quadrature_scale[id]) {
 		case 0:
 			*function = QUAD8_COUNT_FUNCTION_QUADRATURE_X1;
 			break;
@@ -693,6 +753,8 @@ static int quad8_function_get(struct counter_device *counter,
 	else
 		*function = QUAD8_COUNT_FUNCTION_PULSE_DIRECTION;
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -703,10 +765,15 @@ static int quad8_function_set(struct counter_device *counter,
 	const int id = count->id;
 	unsigned int *const quadrature_mode = priv->quadrature_mode + id;
 	unsigned int *const scale = priv->quadrature_scale + id;
-	unsigned int mode_cfg = priv->count_mode[id] << 1;
 	unsigned int *const synchronous_mode = priv->synchronous_mode + id;
-	const unsigned int idr_cfg = priv->index_polarity[id] << 1;
 	const int base_offset = priv->base + 2 * id + 1;
+	unsigned int mode_cfg;
+	unsigned int idr_cfg;
+
+	mutex_lock(&priv->lock);
+
+	mode_cfg = priv->count_mode[id] << 1;
+	idr_cfg = priv->index_polarity[id] << 1;
 
 	if (function == QUAD8_COUNT_FUNCTION_PULSE_DIRECTION) {
 		*quadrature_mode = 0;
@@ -742,6 +809,8 @@ static int quad8_function_set(struct counter_device *counter,
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -858,15 +927,20 @@ static int quad8_index_polarity_set(struct counter_device *counter,
 {
 	struct quad8_iio *const priv = counter->priv;
 	const size_t channel_id = signal->id - 16;
-	const unsigned int idr_cfg = priv->synchronous_mode[channel_id] |
-		index_polarity << 1;
 	const int base_offset = priv->base + 2 * channel_id + 1;
+	unsigned int idr_cfg = index_polarity << 1;
+
+	mutex_lock(&priv->lock);
+
+	idr_cfg |= priv->synchronous_mode[channel_id];
 
 	priv->index_polarity[channel_id] = index_polarity;
 
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -893,19 +967,26 @@ static int quad8_synchronous_mode_set(struct counter_device *counter,
 {
 	struct quad8_iio *const priv = counter->priv;
 	const size_t channel_id = signal->id - 16;
-	const unsigned int idr_cfg = synchronous_mode |
-		priv->index_polarity[channel_id] << 1;
 	const int base_offset = priv->base + 2 * channel_id + 1;
+	unsigned int idr_cfg = synchronous_mode;
+
+	mutex_lock(&priv->lock);
+
+	idr_cfg |= priv->index_polarity[channel_id] << 1;
 
 	/* Index function must be non-synchronous in non-quadrature mode */
-	if (synchronous_mode && !priv->quadrature_mode[channel_id])
+	if (synchronous_mode && !priv->quadrature_mode[channel_id]) {
+		mutex_unlock(&priv->lock);
 		return -EINVAL;
+	}
 
 	priv->synchronous_mode[channel_id] = synchronous_mode;
 
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -970,6 +1051,8 @@ static int quad8_count_mode_set(struct counter_device *counter,
 		break;
 	}
 
+	mutex_lock(&priv->lock);
+
 	priv->count_mode[count->id] = cnt_mode;
 
 	/* Set count mode configuration value */
@@ -982,6 +1065,8 @@ static int quad8_count_mode_set(struct counter_device *counter,
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -1023,6 +1108,8 @@ static ssize_t quad8_count_enable_write(struct counter_device *counter,
 	if (err)
 		return err;
 
+	mutex_lock(&priv->lock);
+
 	priv->ab_enable[count->id] = ab_enable;
 
 	ior_cfg = ab_enable | priv->preset_enable[count->id] << 1;
@@ -1030,6 +1117,8 @@ static ssize_t quad8_count_enable_write(struct counter_device *counter,
 	/* Load I/O control configuration */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -1058,14 +1147,28 @@ static ssize_t quad8_count_preset_read(struct counter_device *counter,
 	return sprintf(buf, "%u\n", priv->preset[count->id]);
 }
 
+static void quad8_preset_register_set(struct quad8_iio *quad8iio, int id,
+		unsigned int preset)
+{
+	const unsigned int base_offset = quad8iio->base + 2 * id;
+	int i;
+
+	quad8iio->preset[id] = preset;
+
+	/* Reset Byte Pointer */
+	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+
+	/* Set Preset Register */
+	for (i = 0; i < 3; i++)
+		outb(preset >> (8 * i), base_offset);
+}
+
 static ssize_t quad8_count_preset_write(struct counter_device *counter,
 	struct counter_count *count, void *private, const char *buf, size_t len)
 {
 	struct quad8_iio *const priv = counter->priv;
-	const int base_offset = priv->base + 2 * count->id;
 	unsigned int preset;
 	int ret;
-	int i;
 
 	ret = kstrtouint(buf, 0, &preset);
 	if (ret)
@@ -1075,14 +1178,11 @@ static ssize_t quad8_count_preset_write(struct counter_device *counter,
 	if (preset > 0xFFFFFF)
 		return -EINVAL;
 
-	priv->preset[count->id] = preset;
+	mutex_lock(&priv->lock);
 
-	/* Reset Byte Pointer */
-	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+	quad8_preset_register_set(priv, count->id, preset);
 
-	/* Set Preset Register */
-	for (i = 0; i < 3; i++)
-		outb(preset >> (8 * i), base_offset);
+	mutex_unlock(&priv->lock);
 
 	return len;
 }
@@ -1090,15 +1190,20 @@ static ssize_t quad8_count_preset_write(struct counter_device *counter,
 static ssize_t quad8_count_ceiling_read(struct counter_device *counter,
 	struct counter_count *count, void *private, char *buf)
 {
-	const struct quad8_iio *const priv = counter->priv;
+	struct quad8_iio *const priv = counter->priv;
+
+	mutex_lock(&priv->lock);
 
 	/* Range Limit and Modulo-N count modes use preset value as ceiling */
 	switch (priv->count_mode[count->id]) {
 	case 1:
 	case 3:
-		return quad8_count_preset_read(counter, count, private, buf);
+		mutex_unlock(&priv->lock);
+		return sprintf(buf, "%u\n", priv->preset[count->id]);
 	}
 
+	mutex_unlock(&priv->lock);
+
 	/* By default 0x1FFFFFF (25 bits unsigned) is maximum count */
 	return sprintf(buf, "33554431\n");
 }
@@ -1107,15 +1212,29 @@ static ssize_t quad8_count_ceiling_write(struct counter_device *counter,
 	struct counter_count *count, void *private, const char *buf, size_t len)
 {
 	struct quad8_iio *const priv = counter->priv;
+	unsigned int ceiling;
+	int ret;
+
+	ret = kstrtouint(buf, 0, &ceiling);
+	if (ret)
+		return ret;
+
+	/* Only 24-bit values are supported */
+	if (ceiling > 0xFFFFFF)
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
 
 	/* Range Limit and Modulo-N count modes use preset value as ceiling */
 	switch (priv->count_mode[count->id]) {
 	case 1:
 	case 3:
-		return quad8_count_preset_write(counter, count, private, buf,
-						len);
+		quad8_preset_register_set(priv, count->id, ceiling);
+		break;
 	}
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -1143,6 +1262,8 @@ static ssize_t quad8_count_preset_enable_write(struct counter_device *counter,
 	/* Preset enable is active low in Input/Output Control register */
 	preset_enable = !preset_enable;
 
+	mutex_lock(&priv->lock);
+
 	priv->preset_enable[count->id] = preset_enable;
 
 	ior_cfg = priv->ab_enable[count->id] | (unsigned int)preset_enable << 1;
@@ -1150,6 +1271,8 @@ static ssize_t quad8_count_preset_enable_write(struct counter_device *counter,
 	/* Load I/O control configuration to Input / Output Control Register */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -1320,6 +1443,9 @@ static int quad8_probe(struct device *dev, unsigned int id)
 	quad8iio->counter.priv = quad8iio;
 	quad8iio->base = base[id];
 
+	/* Initialize mutex */
+	mutex_init(&quad8iio->lock);
+
 	/* Reset all counters and disable interrupt function */
 	outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
 	/* Set initial configuration for all counters */
-- 
2.20.1


  parent reply	other threads:[~2020-04-30 14:06 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-30 13:51 [PATCH AUTOSEL 5.4 01/57] drm/bridge: analogix_dp: Split bind() into probe() and real bind() Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 02/57] iio:ad7797: Use correct attribute_group Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 03/57] ASoC: topology: Check return value of soc_tplg_create_tlv Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 04/57] ASoC: topology: Check return value of soc_tplg_*_create Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 05/57] ASoC: topology: Check soc_tplg_add_route return value Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 06/57] ASoC: topology: Check return value of pcm_new_ver Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 07/57] ASoC: topology: Check return value of soc_tplg_dai_config Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 08/57] nfsd: memory corruption in nfsd4_lock() Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 09/57] selftests/ipc: Fix test failure seen after initial test run Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 10/57] drivers: soc: xilinx: fix firmware driver Kconfig dependency Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 11/57] ASoC: sgtl5000: Fix VAG power-on handling Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 12/57] ASoC: q6dsp6: q6afe-dai: add missing channels to MI2S DAIs Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 13/57] ASoC: topology: Fix endianness issue Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 14/57] usb: dwc3: gadget: Properly set maxpacket limit Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 15/57] usb: dwc3: gadget: Do link recovery for SS and SSP Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 16/57] ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 17/57] ASoC: rsnd: Fix HDMI channel mapping for " Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 18/57] ASoC: codecs: hdac_hdmi: Fix incorrect use of list_for_each_entry Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 19/57] ARM: dts: bcm283x: Disable dsi0 node Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 20/57] remoteproc: qcom_q6v5_mss: fix a bug in q6v5_probe() Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 21/57] usb: gadget: udc: atmel: Fix vbus disconnect handling Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 22/57] svcrdma: Fix trace point use-after-free race Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 23/57] ASoC: stm32: sai: fix sai probe Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 24/57] ASoC: SOF: Intel: add min/max channels for SSP on Baytrail/Broadwell Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 25/57] drm/amdgpu: Correctly initialize thermal controller for GPUs with Powerplay table v0 (e.g Hawaii) Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 26/57] wimax/i2400m: Fix potential urb refcnt leak Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 27/57] net: stmmac: fix enabling socfpga's ptp_ref_clock Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 28/57] net: stmmac: Fix sub-second increment Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 29/57] netfilter: nat: fix error handling upon registering inet hook Sasha Levin
2020-04-30 13:51 ` Sasha Levin [this message]
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 31/57] ASoC: meson: axg-card: fix codec-to-codec link setup Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 32/57] ASoC: rsnd: Don't treat master SSI in multi SSI setup as parent Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 33/57] ASoC: rsnd: Fix "status check failed" spam for multi-SSI Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 34/57] net/mlx5: Fix failing fw tracer allocation on s390 Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 35/57] net/mlx5e: Don't trigger IRQ multiple times on XSK wakeup to avoid WQ overruns Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 36/57] net/mlx5e: Get the latest values from counters in switchdev mode Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 37/57] cpumap: Avoid warning when CONFIG_DEBUG_PER_CPU_MAPS is enabled Sasha Levin
2020-04-30 13:51 ` [PATCH AUTOSEL 5.4 38/57] bpf: Forbid XADD on spilled pointers for unprivileged users Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 39/57] ASoC: wm8960: Fix wrong clock after suspend & resume Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 40/57] cifs: protect updating server->dstaddr with a spinlock Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 41/57] blk-iocost: Fix error on iocost_ioc_vrate_adj Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 42/57] s390/ftrace: fix potential crashes when switching tracers Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 43/57] scripts/config: allow colons in option strings for sed Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 44/57] sched/core: Fix reset-on-fork from RT with uclamp Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 45/57] perf/core: fix parent pid/tid in task exit events Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 46/57] cifs: do not share tcons with DFS Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 47/57] tracing: Fix memory leaks in trace_events_hist.c Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 48/57] um: ensure `make ARCH=um mrproper` removes arch/$(SUBARCH)/include/generated/ Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 49/57] lib/mpi: Fix building for powerpc with clang Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 50/57] mac80211: sta_info: Add lockdep condition for RCU list usage Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 51/57] afs: Fix to actually set AFS_SERVER_FL_HAVE_EPOCH Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 52/57] afs: Make record checking use TASK_UNINTERRUPTIBLE when appropriate Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 53/57] net: bcmgenet: suppress warnings on failed Rx SKB allocations Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 54/57] net: systemport: " Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 55/57] bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 56/57] bpf, x86_32: Fix clobbering of dst for BPF_JSET Sasha Levin
2020-04-30 13:52 ` [PATCH AUTOSEL 5.4 57/57] bpf, x86_32: Fix logic error in BPF_LDX zero-extension Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200430135218.20372-30-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=syednwaris@gmail.com \
    --cc=vilhelm.gray@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox