From: Prashant Malani <pmalani@chromium.org>
To: Daniil Lunev <dlunev@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>,
LKML <linux-kernel@vger.kernel.org>,
Benson Leung <bleung@chromium.org>,
Guenter Roeck <groeck@chromium.org>
Subject: Re: [PATCH] platform/chrome: cros_ec_typec: Handle NULL EC pointer during probe.
Date: Thu, 30 Apr 2020 17:56:09 -0700 [thread overview]
Message-ID: <20200501005609.GA131713@google.com> (raw)
In-Reply-To: <CAONX=-cR0H2zrGEunwq2k3g+d=9asmeu39ssFN31yFs6i-wktQ@mail.gmail.com>
Hi Daniil,
On Fri, May 01, 2020 at 10:15:18AM +1000, Daniil Lunev wrote:
> On the official revision of coreboot for hatch it doesn't even try to
> load Type C. However it gives some warning messages from
> cros-usbpd-notify-acpi about EC, So I wonder why the check of the same
> type is not appropriate in the typec driver?
I think the difference is that GOOG0003 is already present on shipped /
official versions of coreboot (so not having that check can cause
existing release images/devices to crash), whereas for GOOG0014 that is / isn't the case.
Is GOOG0014 present on the official release coreboot image for this
device? If so, what's its path (/sys/bus/acpi/devices/<HID>/path) ?
Best regards,
-Prashant
>
> ../chrome/cros_usbpd_notify.c
>
> /* Get the EC device pointer needed to talk to the EC. */
> ec_dev = dev_get_drvdata(dev->parent);
> if (!ec_dev) {
> /*
> * We continue even for older devices which don't have the
> * correct device heirarchy, namely, GOOG0003 is a child
> * of GOOG0004.
> */
> dev_warn(dev, "Couldn't get Chrome EC device pointer.\n");
> }
>
>
> # dmesg
> ...
> [ 8.513351] cros-ec-spi spi-PRP0001:02: EC failed to respond in time
> [ 8.722072] cros-ec-spi spi-PRP0001:02: EC failed to respond in time
> [ 8.729271] cros-ec-spi spi-PRP0001:02: Cannot identify the EC: error -110
> [ 8.736966] cros-ec-spi spi-PRP0001:02: cannot register EC,
> fallback to spidev
> [ 8.767017] cros_ec_lpcs GOOG0004:00: Chrome EC device registered
> [ 8.807537] cros-usbpd-notify-acpi GOOG0003:00: Couldn't get Chrome
> EC device pointer.
> ...
>
> On Fri, May 1, 2020 at 2:17 AM Prashant Malani <pmalani@chromium.org> wrote:
> >
> > Hi Enric,
> >
> > On Thu, Apr 30, 2020 at 8:26 AM Enric Balletbo i Serra
> > <enric.balletbo@collabora.com> wrote:
> > >
> > > Hi Prashant,
> > >
> > > On 30/4/20 2:43, Prashant Malani wrote:
> > > > On Wed, Apr 29, 2020 at 5:38 PM Daniil Lunev <dlunev@chromium.org> wrote:
> > > >>
> > > >> [to make it appear on the mailing list as I didn't realize I was in
> > > >> hypertext sending mode]
> > > >>
> > > >> On Thu, Apr 30, 2020 at 10:11 AM Daniil Lunev <dlunev@chromium.org> wrote:
> > > >>>
> > > >>> Hi Enric.
> > > >>> I encountered the issue on a Hatch device when trying running 5.4 kernel on that. After talking to Prashant it seems that any device with coreboot built before a certain point (a particular fix for device hierarchy in ACPI tables of Chrome devices which happened in mid-April) will not be able to correctly initialize the driver and will get a kernel panic trying to do so.
> > > >
> > > > A clarifying detail here: This should not be seen in any current
> > > > *production* device. No prod device firmware will carry the erroneous
> > > > ACPI device entry.
> > > >
> > >
> > > Thanks for the clarification. Then, I don't think we need to upstream this. This
> > > kind of "defensive-programming" it's not something that should matter to upstream.
> >
> > Actually, on second thought, I am not 100% sure about this:
> > Daniil, is the erroneous ACPI device on a *production* firmware for
> > this device (I'm not sure about the vintage of that device's BIOS)?
> >
> > My apologies for the confusion, Enric and Daniil; but would be good to
> > get clarification from Daniil.
> >
> > Best regards,
> > >
> > > Thanks,
> > > Enric
> > >
> > >
> > > >>> Thanks,
> > > >>> Daniil
> > > >>>
> > > >>> On Thu, Apr 30, 2020 at 7:58 AM Enric Balletbo i Serra <enric.balletbo@collabora.com> wrote:
> > > >>>>
> > > >>>> Hi Daniil,
> > > >>>>
> > > >>>> Thank you for the patch.
> > > >>>>
> > > >>>> On 28/4/20 3:02, Daniil Lunev wrote:
> > > >>>>> Missing EC in device hierarchy causes NULL pointer to be returned to the
> > > >>>>> probe function which leads to NULL pointer dereference when trying to
> > > >>>>> send a command to the EC. This can be the case if the device is missing
> > > >>>>> or incorrectly configured in the firmware blob. Even if the situation
> > > >>>>
> > > >>>> There is any production device with a buggy firmware outside? Or this is just
> > > >>>> for defensive programming while developing the firmware? Which device is
> > > >>>> affected for this issue?
> > > >>>>
> > > >>>> Thanks,
> > > >>>> Enric
> > > >>>>
> > > >>>>> occures, the driver shall not cause a kernel panic as the condition is
> > > >>>>> not critical for the system functions.
> > > >>>>>
> > > >>>>> Signed-off-by: Daniil Lunev <dlunev@chromium.org>
> > > >>>>> ---
> > > >>>>>
> > > >>>>> drivers/platform/chrome/cros_ec_typec.c | 5 +++++
> > > >>>>> 1 file changed, 5 insertions(+)
> > > >>>>>
> > > >>>>> diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c
> > > >>>>> index 874269c07073..30d99c930445 100644
> > > >>>>> --- a/drivers/platform/chrome/cros_ec_typec.c
> > > >>>>> +++ b/drivers/platform/chrome/cros_ec_typec.c
> > > >>>>> @@ -301,6 +301,11 @@ static int cros_typec_probe(struct platform_device *pdev)
> > > >>>>>
> > > >>>>> typec->dev = dev;
> > > >>>>> typec->ec = dev_get_drvdata(pdev->dev.parent);
> > > >>>>> + if (!typec->ec) {
> > > >>>>> + dev_err(dev, "Failed to get Cros EC data\n");
> > > >>>>> + return -EINVAL;
> > > >>>>> + }
> > > >>>>> +
> > > >>>>> platform_set_drvdata(pdev, typec);
> > > >>>>>
> > > >>>>> ret = cros_typec_get_cmd_version(typec);
> > > >>>>>
next prev parent reply other threads:[~2020-05-01 0:56 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-28 1:02 [PATCH] platform/chrome: cros_ec_typec: Handle NULL EC pointer during probe Daniil Lunev
2020-04-29 21:58 ` Enric Balletbo i Serra
[not found] ` <CAONX=-dLVBpz+p1si4cWGHEmQ_toO8kW=fCPcdUuX2KLc-o=2A@mail.gmail.com>
2020-04-30 0:38 ` Daniil Lunev
2020-04-30 0:43 ` Prashant Malani
2020-04-30 15:26 ` Enric Balletbo i Serra
2020-04-30 16:17 ` Prashant Malani
2020-05-01 0:15 ` Daniil Lunev
2020-05-01 0:56 ` Prashant Malani [this message]
2020-05-01 3:22 ` Daniil Lunev
2020-05-05 20:36 ` Enric Balletbo i Serra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200501005609.GA131713@google.com \
--to=pmalani@chromium.org \
--cc=bleung@chromium.org \
--cc=dlunev@chromium.org \
--cc=enric.balletbo@collabora.com \
--cc=groeck@chromium.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox