Re: [PATCH v4] virtio-blk: handle block_device_operations callbacks after hot unplug

["Michael S. Tsirkin" <mst@redhat.com>]

On Mon, May 04, 2020 at 01:48:34PM +0200, Cornelia Huck wrote:
> On Thu, 30 Apr 2020 15:04:42 +0100
> Stefan Hajnoczi <stefanha@redhat.com> wrote:
> 
> > A userspace process holding a file descriptor to a virtio_blk device can
> > still invoke block_device_operations after hot unplug.  This leads to a
> > use-after-free accessing vblk->vdev in virtblk_getgeo() when
> > ioctl(HDIO_GETGEO) is invoked:
> > 
> >   BUG: unable to handle kernel NULL pointer dereference at 0000000000000090
> >   IP: [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio]
> >   PGD 800000003a92f067 PUD 3a930067 PMD 0
> >   Oops: 0000 [#1] SMP
> >   CPU: 0 PID: 1310 Comm: hdio-getgeo Tainted: G           OE  ------------   3.10.0-1062.el7.x86_64 #1
> >   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
> >   task: ffff9be5fbfb8000 ti: ffff9be5fa890000 task.ti: ffff9be5fa890000
> >   RIP: 0010:[<ffffffffc00e5450>]  [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio]
> >   RSP: 0018:ffff9be5fa893dc8  EFLAGS: 00010246
> >   RAX: ffff9be5fc3f3400 RBX: ffff9be5fa893e30 RCX: 0000000000000000
> >   RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff9be5fbc10b40
> >   RBP: ffff9be5fa893dc8 R08: 0000000000000301 R09: 0000000000000301
> >   R10: 0000000000000000 R11: 0000000000000000 R12: ffff9be5fdc24680
> >   R13: ffff9be5fbc10b40 R14: ffff9be5fbc10480 R15: 0000000000000000
> >   FS:  00007f1bfb968740(0000) GS:ffff9be5ffc00000(0000) knlGS:0000000000000000
> >   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >   CR2: 0000000000000090 CR3: 000000003a894000 CR4: 0000000000360ff0
> >   DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> >   DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> >   Call Trace:
> >    [<ffffffffc016ac37>] virtblk_getgeo+0x47/0x110 [virtio_blk]
> >    [<ffffffff8d3f200d>] ? handle_mm_fault+0x39d/0x9b0
> >    [<ffffffff8d561265>] blkdev_ioctl+0x1f5/0xa20
> >    [<ffffffff8d488771>] block_ioctl+0x41/0x50
> >    [<ffffffff8d45d9e0>] do_vfs_ioctl+0x3a0/0x5a0
> >    [<ffffffff8d45dc81>] SyS_ioctl+0xa1/0xc0
> > 
> > A related problem is that virtblk_remove() leaks the vd_index_ida index
> > when something still holds a reference to vblk->disk during hot unplug.
> > This causes virtio-blk device names to be lost (vda, vdb, etc).
> > 
> > Fix these issues by protecting vblk->vdev with a mutex and reference
> > counting vblk so the vd_index_ida index can be removed in all cases.
> > 
> > Fixes: 48e4043d4529523cbc7fa8dd745bd8e2c45ce1d3
> >        ("virtio: add virtio disk geometry feature")
> 
> Should be
> 
> Fixes: 48e4043d4529 ("virtio: add virtio disk geometry feature")


Yes - it was reported on linux-next so I fixed it up when applying.

> > Reported-by: Lance Digby <ldigby@redhat.com>
> > Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
> > ---
> > v4:
> >  * Clarify vdev_mutex usage [Stefano and Michael]
> > 
> >  drivers/block/virtio_blk.c | 86 ++++++++++++++++++++++++++++++++++----
> >  1 file changed, 78 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
> > index 93468b7c6701..9d21bf0f155e 100644
> > --- a/drivers/block/virtio_blk.c
> > +++ b/drivers/block/virtio_blk.c
> > @@ -33,6 +33,15 @@ struct virtio_blk_vq {
> >  } ____cacheline_aligned_in_smp;
> >  
> >  struct virtio_blk {
> > +	/*
> > +	 * This mutex must be held by anything that may run after
> > +	 * virtblk_remove() sets vblk->vdev to NULL.
> > +	 *
> > +	 * blk-mq, virtqueue processing, and sysfs attribute code paths are
> > +	 * shut down before vblk->vdev is set to NULL and therefore do not need
> > +	 * to hold this mutex.
> > +	 */
> > +	struct mutex vdev_mutex;
> >  	struct virtio_device *vdev;
> >  
> >  	/* The disk structure for the kernel. */
> > @@ -44,6 +53,13 @@ struct virtio_blk {
> >  	/* Process context for config space updates */
> >  	struct work_struct config_work;
> >  
> > +	/*
> > +	 * Tracks references from block_device_operations open/release and
> > +	 * virtio_driver probe/remove so this object can be freed once no
> > +	 * longer in use.
> > +	 */
> > +	refcount_t refs;
> 
> Using a struct kref might be more idiomatic.
> 
> > +
> >  	/* What host tells us, plus 2 for header & tailer. */
> >  	unsigned int sg_elems;
> >  
> > @@ -295,10 +311,55 @@ static int virtblk_get_id(struct gendisk *disk, char *id_str)
> >  	return err;
> >  }
> >  
> > +static void virtblk_get(struct virtio_blk *vblk)
> > +{
> > +	refcount_inc(&vblk->refs);
> 
> Should the code even be able to grab a ref if !vblk->vdev?
> 
> > +}
> > +
> > +static void virtblk_put(struct virtio_blk *vblk)
> > +{
> > +	if (refcount_dec_and_test(&vblk->refs)) {
> > +		ida_simple_remove(&vd_index_ida, vblk->index);
> > +		mutex_destroy(&vblk->vdev_mutex);
> > +		kfree(vblk);
> 
> I think that's where putting these cleanups into a release() funtion
> would be more idiomatic.
> 
> > +	}
> > +}
> 
> (...)
> 
> Looks sane to me.