[PATCH 5.6 03/73] drm/amdgpu: invalidate L2 before SDMA IBs (v2)

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Marek Olšák <marek.olsak@amd.com>

commit fdf83646c0542ecfb9adc4db8f741a1f43dca058 upstream.

This fixes GPU hangs due to cache coherency issues.

v2: Split the version bump to a separate patch

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h |   16 ++++++++++++++++
 drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c            |   14 +++++++++++++-
 2 files changed, 29 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h
+++ b/drivers/gpu/drm/amd/amdgpu/navi10_sdma_pkt_open.h
@@ -73,6 +73,22 @@
 #define SDMA_OP_AQL_COPY  0
 #define SDMA_OP_AQL_BARRIER_OR  0
 
+#define SDMA_GCR_RANGE_IS_PA		(1 << 18)
+#define SDMA_GCR_SEQ(x)			(((x) & 0x3) << 16)
+#define SDMA_GCR_GL2_WB			(1 << 15)
+#define SDMA_GCR_GL2_INV		(1 << 14)
+#define SDMA_GCR_GL2_DISCARD		(1 << 13)
+#define SDMA_GCR_GL2_RANGE(x)		(((x) & 0x3) << 11)
+#define SDMA_GCR_GL2_US			(1 << 10)
+#define SDMA_GCR_GL1_INV		(1 << 9)
+#define SDMA_GCR_GLV_INV		(1 << 8)
+#define SDMA_GCR_GLK_INV		(1 << 7)
+#define SDMA_GCR_GLK_WB			(1 << 6)
+#define SDMA_GCR_GLM_INV		(1 << 5)
+#define SDMA_GCR_GLM_WB			(1 << 4)
+#define SDMA_GCR_GL1_RANGE(x)		(((x) & 0x3) << 2)
+#define SDMA_GCR_GLI_INV(x)		(((x) & 0x3) << 0)
+
 /*define for op field*/
 #define SDMA_PKT_HEADER_op_offset 0
 #define SDMA_PKT_HEADER_op_mask   0x000000FF
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
@@ -382,6 +382,18 @@ static void sdma_v5_0_ring_emit_ib(struc
 	unsigned vmid = AMDGPU_JOB_GET_VMID(job);
 	uint64_t csa_mc_addr = amdgpu_sdma_get_csa_mc_addr(ring, vmid);
 
+	/* Invalidate L2, because if we don't do it, we might get stale cache
+	 * lines from previous IBs.
+	 */
+	amdgpu_ring_write(ring, SDMA_PKT_HEADER_OP(SDMA_OP_GCR_REQ));
+	amdgpu_ring_write(ring, 0);
+	amdgpu_ring_write(ring, (SDMA_GCR_GL2_INV |
+				 SDMA_GCR_GL2_WB |
+				 SDMA_GCR_GLM_INV |
+				 SDMA_GCR_GLM_WB) << 16);
+	amdgpu_ring_write(ring, 0xffffff80);
+	amdgpu_ring_write(ring, 0xffff);
+
 	/* An IB packet must end on a 8 DW boundary--the next dword
 	 * must be on a 8-dword boundary. Our IB packet below is 6
 	 * dwords long, thus add x number of NOPs, such that, in
@@ -1597,7 +1609,7 @@ static const struct amdgpu_ring_funcs sd
 		SOC15_FLUSH_GPU_TLB_NUM_WREG * 3 +
 		SOC15_FLUSH_GPU_TLB_NUM_REG_WAIT * 6 * 2 +
 		10 + 10 + 10, /* sdma_v5_0_ring_emit_fence x3 for user fence, vm fence */
-	.emit_ib_size = 7 + 6, /* sdma_v5_0_ring_emit_ib */
+	.emit_ib_size = 5 + 7 + 6, /* sdma_v5_0_ring_emit_ib */
 	.emit_ib = sdma_v5_0_ring_emit_ib,
 	.emit_fence = sdma_v5_0_ring_emit_fence,
 	.emit_pipeline_sync = sdma_v5_0_ring_emit_pipeline_sync,