From: Matthias Kaehlcke <mka@chromium.org>
To: Rajendra Nayak <rnayak@codeaurora.org>
Cc: viresh.kumar@linaro.org, sboyd@kernel.org,
bjorn.andersson@linaro.org, agross@kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
Stanimir Varbanov <stanimir.varbanov@linaro.org>,
linux-media@vger.kernel.org
Subject: Re: [PATCH v4 5/6] media: venus: core: Add support for opp tables/perf voting
Date: Tue, 5 May 2020 16:07:02 -0700 [thread overview]
Message-ID: <20200505230702.GX4525@google.com> (raw)
In-Reply-To: <1588507469-31889-6-git-send-email-rnayak@codeaurora.org>
Hi Rajendra,
On Sun, May 03, 2020 at 05:34:28PM +0530, Rajendra Nayak wrote:
> Add support to add OPP tables and perf voting on the OPP powerdomain.
> This is needed so venus votes on the corresponding performance state
> for the OPP powerdomain along with setting the core clock rate.
>
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> Cc: Stanimir Varbanov <stanimir.varbanov@linaro.org>
> Cc: linux-media@vger.kernel.org
> ---
> drivers/media/platform/qcom/venus/core.c | 28 +++++++++++++
> drivers/media/platform/qcom/venus/core.h | 5 +++
> drivers/media/platform/qcom/venus/pm_helpers.c | 54 ++++++++++++++++++++++++--
> 3 files changed, 83 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
> index 194b10b9..6f72e99 100644
> --- a/drivers/media/platform/qcom/venus/core.c
> +++ b/drivers/media/platform/qcom/venus/core.c
> @@ -12,6 +12,7 @@
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/types.h>
> +#include <linux/pm_opp.h>
> #include <linux/pm_runtime.h>
> #include <media/videobuf2-v4l2.h>
> #include <media/v4l2-mem2mem.h>
> @@ -214,6 +215,20 @@ static int venus_probe(struct platform_device *pdev)
> if (!core->pm_ops)
> return -ENODEV;
>
> + core->opp_table = dev_pm_opp_set_clkname(dev, "core");
> + if (IS_ERR(core->opp_table))
> + return PTR_ERR(core->opp_table);
> +
> + if (core->res->opp_pmdomain) {
> + ret = dev_pm_opp_of_add_table(dev);
> + if (!ret) {
> + core->has_opp_table = true;
> + } else if (ret != -ENODEV) {
> + dev_err(dev, "invalid OPP table in device tree\n");
dev_pm_opp_put_clkname(core->opp_table);
this and removing the OPP table is also needed in other error paths below,
which currently return directly. Looks like you want to add another label
to the unwind path.
> + return ret;
> + }
> + }
> +
> if (core->pm_ops->core_get) {
> ret = core->pm_ops->core_get(dev);
> if (ret)
> @@ -301,6 +316,9 @@ static int venus_probe(struct platform_device *pdev)
> err_venus_shutdown:
> venus_shutdown(core);
> err_runtime_disable:
> + if (core->has_opp_table)
> + dev_pm_opp_of_remove_table(dev);
> + dev_pm_opp_put_clkname(core->opp_table);
move this after hfi_destroy(core), to do unwinding in reverse order, it
also allows to add the new jump label mentioned above.
> pm_runtime_set_suspended(dev);
> pm_runtime_disable(dev);
> hfi_destroy(core);
> @@ -326,6 +344,10 @@ static int venus_remove(struct platform_device *pdev)
>
> venus_firmware_deinit(core);
>
> + if (core->has_opp_table)
> + dev_pm_opp_of_remove_table(dev);
> + dev_pm_opp_put_clkname(core->opp_table);
> +
> pm_runtime_put_sync(dev);
> pm_runtime_disable(dev);
>
> @@ -350,6 +372,10 @@ static __maybe_unused int venus_runtime_suspend(struct device *dev)
> if (ret)
> return ret;
>
> + /* Drop the performance state vote */
> + if (core->opp_pmdomain)
> + dev_pm_opp_set_rate(dev, 0);
> +
> if (pm_ops->core_power)
> ret = pm_ops->core_power(dev, POWER_OFF);
>
> @@ -511,6 +537,7 @@ static const struct venus_resources sdm845_res_v2 = {
> .vcodec_clks_num = 2,
> .vcodec_pmdomains = { "venus", "vcodec0", "vcodec1" },
> .vcodec_pmdomains_num = 3,
> + .opp_pmdomain = (const char *[]) { "opp-pd", NULL },
> .vcodec_num = 2,
> .max_load = 3110400, /* 4096x2160@90 */
> .hfi_version = HFI_VERSION_4XX,
> @@ -556,6 +583,7 @@ static const struct venus_resources sc7180_res = {
> .vcodec_clks_num = 2,
> .vcodec_pmdomains = { "venus", "vcodec0" },
> .vcodec_pmdomains_num = 2,
> + .opp_pmdomain = (const char *[]) { "opp-pd", NULL },
The new power domain needs to be added to the SDM845 and SC7180 bindings.
> .vcodec_num = 1,
> .hfi_version = HFI_VERSION_4XX,
> .vmem_id = VIDC_RESOURCE_NONE,
> diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
> index bd3ac6a..cc1d511 100644
> --- a/drivers/media/platform/qcom/venus/core.h
> +++ b/drivers/media/platform/qcom/venus/core.h
> @@ -62,6 +62,7 @@ struct venus_resources {
> unsigned int vcodec_clks_num;
> const char * const vcodec_pmdomains[VIDC_PMDOMAINS_NUM_MAX];
> unsigned int vcodec_pmdomains_num;
> + const char **opp_pmdomain;
> unsigned int vcodec_num;
> enum hfi_version hfi_version;
> u32 max_load;
> @@ -144,8 +145,12 @@ struct venus_core {
> struct clk *vcodec1_clks[VIDC_VCODEC_CLKS_NUM_MAX];
> struct icc_path *video_path;
> struct icc_path *cpucfg_path;
> + struct opp_table *opp_table;
> + bool has_opp_table;
> struct device_link *pd_dl_venus;
> struct device *pmdomains[VIDC_PMDOMAINS_NUM_MAX];
> + struct device_link *opp_dl_venus;
> + struct device *opp_pmdomain;
> struct video_device *vdev_dec;
> struct video_device *vdev_enc;
> struct v4l2_device v4l2_dev;
> diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
> index abf9315..30600bc 100644
> --- a/drivers/media/platform/qcom/venus/pm_helpers.c
> +++ b/drivers/media/platform/qcom/venus/pm_helpers.c
> @@ -9,6 +9,7 @@
> #include <linux/iopoll.h>
> #include <linux/kernel.h>
> #include <linux/pm_domain.h>
> +#include <linux/pm_opp.h>
> #include <linux/pm_runtime.h>
> #include <linux/types.h>
> #include <media/v4l2-mem2mem.h>
> @@ -66,10 +67,9 @@ static void core_clks_disable(struct venus_core *core)
>
> static int core_clks_set_rate(struct venus_core *core, unsigned long freq)
> {
> - struct clk *clk = core->clks[0];
> int ret;
>
> - ret = clk_set_rate(clk, freq);
> + ret = dev_pm_opp_set_rate(core->dev, freq);
> if (ret)
> return ret;
>
> @@ -740,13 +740,16 @@ static int venc_power_v4(struct device *dev, int on)
>
> static int vcodec_domains_get(struct device *dev)
> {
> + int ret;
> + struct opp_table *opp_table;
> + struct device **opp_virt_dev;
> struct venus_core *core = dev_get_drvdata(dev);
> const struct venus_resources *res = core->res;
> struct device *pd;
> unsigned int i;
>
> if (!res->vcodec_pmdomains_num)
> - return -ENODEV;
> + goto skip_pmdomains;
>
> for (i = 0; i < res->vcodec_pmdomains_num; i++) {
> pd = dev_pm_domain_attach_by_name(dev,
> @@ -763,7 +766,41 @@ static int vcodec_domains_get(struct device *dev)
> if (!core->pd_dl_venus)
> return -ENODEV;
>
> +skip_pmdomains:
> + if (!res->opp_pmdomain || !core->has_opp_table)
nit: '!res->opp_pmdomain' isn't strictly needed, 'has_opp_table' is always
false when there is no OPP domain. It's ok if you prefer to keep it.
> + return 0;
> +
> + /* Attach the power domain for setting performance state */
> + opp_table = dev_pm_opp_attach_genpd(dev, res->opp_pmdomain, &opp_virt_dev);
> + if (IS_ERR(opp_table)) {
> + ret = PTR_ERR(opp_table);
> + goto opp_attach_err;
> + } else if (opp_virt_dev) {
If I read dev_pm_opp_attach_genpd() correctly 'opp_virt_dev' is always
set unless the function returns an error. If that's correct the condition
can be removed. Otherwise you probably want to initialize 'opp_virt_dev' to
NULL, to not rely on dev_pm_opp_attach_genpd() to do it.
next prev parent reply other threads:[~2020-05-05 23:07 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-03 12:04 [PATCH v4 0/6] DVFS for IO devices on sdm845 and sc7180 Rajendra Nayak
2020-05-03 12:04 ` [PATCH v4 1/6] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state Rajendra Nayak
2020-05-03 12:04 ` [PATCH v4 2/6] spi: spi-geni-qcom: " Rajendra Nayak
2020-05-07 17:00 ` Rajendra Nayak
2020-05-08 11:57 ` Mark Brown
2020-05-03 12:04 ` [PATCH v4 3/6] drm/msm/dpu: " Rajendra Nayak
2020-05-03 12:04 ` [PATCH v4 4/6] drm/msm: dsi: " Rajendra Nayak
2020-05-03 12:04 ` [PATCH v4 5/6] media: venus: core: Add support for opp tables/perf voting Rajendra Nayak
2020-05-05 23:07 ` Matthias Kaehlcke [this message]
2020-05-06 10:26 ` Rajendra Nayak
2020-05-03 12:04 ` [PATCH v4 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state Rajendra Nayak
2020-05-05 16:38 ` Matthias Kaehlcke
2020-05-06 10:19 ` Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200505230702.GX4525@google.com \
--to=mka@chromium.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=rnayak@codeaurora.org \
--cc=sboyd@kernel.org \
--cc=stanimir.varbanov@linaro.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox