[PATCH] iio: sca3000: Remove an erroneous 'get_device()'

Christophe JAILLET
2020-05-06T03:52:19Z

This looks really unusual to have a 'get_device()' hidden in a 'dev_err()'
call.
Remove it.

While at it add a missing \n at the end of the message.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
This patch is purely speculative.
I've looked a bit arround and see no point for this get_device() but other
eyes are welcomed :)
---
drivers/iio/accel/sca3000.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/accel/sca3000.c b/drivers/iio/accel/sca3000.c
index 66d768d971e1..6e429072e44a 100644
--- a/drivers/iio/accel/sca3000.c
+++ b/drivers/iio/accel/sca3000.c
@@ -980,7 +980,7 @@ static int sca3000_read_data(struct sca3000_state *st,
st->tx[0] = SCA3000_READ_REG(reg_address_high);
ret = spi_sync_transfer(st->us, xfer, ARRAY_SIZE(xfer));
if (ret) {
- dev_err(get_device(&st->us->dev), "problem reading register");
+ dev_err(&st->us->dev, "problem reading register\n");
return ret;
}

--
2.25.1