public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Cc: agross@kernel.org, mturquette@baylibre.com, sboyd@kernel.org,
	robh+dt@kernel.org, jassisinghbrar@gmail.com,
	linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH V4 5/8] clk: qcom: Add ipq apss clock controller
Date: Tue, 12 May 2020 13:12:33 -0700	[thread overview]
Message-ID: <20200512201233.GI2165@builder.lan> (raw)
In-Reply-To: <1588573224-3038-6-git-send-email-sivaprak@codeaurora.org>

On Sun 03 May 23:20 PDT 2020, Sivaprakash Murugesan wrote:

> The CPU on Qualcomm ipq platform is clocked primarily by a aplha PLL
> and xo which are connected to a mux and enable block.
> 
> Add support for the mux and enable block which feeds the CPU on ipq
> based devices.
> 

As with the A53 binding, I don't believe that this driver will support
all past, present and future IPQ APSSs. Please make it more specific.

Regards,
Bjorn

> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
> ---
> [V4]
>  * Addressed review comments
>  drivers/clk/qcom/Kconfig    |  11 +++++
>  drivers/clk/qcom/Makefile   |   1 +
>  drivers/clk/qcom/apss-ipq.c | 106 ++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 118 insertions(+)
>  create mode 100644 drivers/clk/qcom/apss-ipq.c
> 
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index e70aa01..8d8465e 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -97,6 +97,17 @@ config IPQ_APSS_PLL
>  	  Say Y if you want to support CPU frequency scaling on ipq based
>  	  devices.
>  
> +config IPQ_APSS
> +	tristate "IPQ APSS Clock Controller"
> +	select IPQ_APSS_PLL
> +	depends on QCOM_APCS_IPC || COMPILE_TEST
> +	help
> +	  Support for APSS clock controller on IPQ platforms. The
> +	  APSS clock controller manages the Mux and enable block that feeds the
> +	  CPUs.
> +	  Say Y if you want to support CPU frequency scaling on
> +	  ipq based devices.
> +
>  config IPQ_GCC_4019
>  	tristate "IPQ4019 Global Clock Controller"
>  	help
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index b4a6ba1..aab7a58 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -20,6 +20,7 @@ clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
>  obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
>  obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
>  obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
> +obj-$(CONFIG_IPQ_APSS) += apss-ipq.o
>  obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
>  obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
>  obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
> diff --git a/drivers/clk/qcom/apss-ipq.c b/drivers/clk/qcom/apss-ipq.c
> new file mode 100644
> index 0000000..59ed8e7
> --- /dev/null
> +++ b/drivers/clk/qcom/apss-ipq.c
> @@ -0,0 +1,106 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/err.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk-provider.h>
> +#include <linux/regmap.h>
> +#include <linux/module.h>
> +
> +#include <dt-bindings/clock/qcom,apss-ipq.h>
> +
> +#include "common.h"
> +#include "clk-regmap.h"
> +#include "clk-branch.h"
> +#include "clk-alpha-pll.h"
> +#include "clk-regmap-mux.h"
> +
> +enum {
> +	P_XO,
> +	P_APSS_PLL_EARLY,
> +};
> +
> +static const struct clk_parent_data parents_apcs_alias0_clk_src[] = {
> +	{ .fw_name = "xo" },
> +	{ .fw_name = "pll" },
> +};
> +
> +static const struct parent_map parents_apcs_alias0_clk_src_map[] = {
> +	{ P_XO, 0 },
> +	{ P_APSS_PLL_EARLY, 5 },
> +};
> +
> +static struct clk_regmap_mux apcs_alias0_clk_src = {
> +	.reg = 0x0050,
> +	.width = 3,
> +	.shift = 7,
> +	.parent_map = parents_apcs_alias0_clk_src_map,
> +	.clkr.hw.init = &(struct clk_init_data){
> +		.name = "apcs_alias0_clk_src",
> +		.parent_data = parents_apcs_alias0_clk_src,
> +		.num_parents = 2,
> +		.ops = &clk_regmap_mux_closest_ops,
> +		.flags = CLK_SET_RATE_PARENT,
> +	},
> +};
> +
> +static struct clk_branch apcs_alias0_core_clk = {
> +	.halt_reg = 0x0058,
> +	.clkr = {
> +		.enable_reg = 0x0058,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "apcs_alias0_core_clk",
> +			.parent_hws = (const struct clk_hw *[]){
> +				&apcs_alias0_clk_src.clkr.hw },
> +			.num_parents = 1,
> +			.flags = CLK_SET_RATE_PARENT,
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static const struct regmap_config apss_ipq_regmap_config = {
> +	.reg_bits       = 32,
> +	.reg_stride     = 4,
> +	.val_bits       = 32,
> +	.max_register   = 0x1000,
> +	.fast_io        = true,
> +};
> +
> +static struct clk_regmap *apss_ipq_clks[] = {
> +	[APCS_ALIAS0_CLK_SRC] = &apcs_alias0_clk_src.clkr,
> +	[APCS_ALIAS0_CORE_CLK] = &apcs_alias0_core_clk.clkr,
> +};
> +
> +static const struct qcom_cc_desc apss_ipq_desc = {
> +	.config = &apss_ipq_regmap_config,
> +	.clks = apss_ipq_clks,
> +	.num_clks = ARRAY_SIZE(apss_ipq_clks),
> +};
> +
> +static int apss_ipq_probe(struct platform_device *pdev)
> +{
> +	struct regmap *regmap;
> +
> +	regmap = dev_get_regmap(pdev->dev.parent, NULL);
> +	if (IS_ERR(regmap))
> +		return PTR_ERR(regmap);
> +
> +	return qcom_cc_really_probe(pdev, &apss_ipq_desc, regmap);
> +}
> +
> +static struct platform_driver apss_ipq_driver = {
> +	.probe = apss_ipq_probe,
> +	.driver = {
> +		.name   = "qcom,apss-ipq-clk",
> +	},
> +};
> +
> +module_platform_driver(apss_ipq_driver);
> +
> +MODULE_DESCRIPTION("QCOM APSS IPQ CLK Driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.7.4
> 

  reply	other threads:[~2020-05-12 20:14 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-04  6:20 [PATCH V4 0/8] Add APSS clock controller support for IPQ6018 Sivaprakash Murugesan
2020-05-04  6:20 ` [PATCH V4 1/8] dt-bindings: mailbox: Add YAML schemas for QCOM APCS global block Sivaprakash Murugesan
2020-05-12 22:46   ` Rob Herring
2020-05-04  6:20 ` [PATCH V4 2/8] dt-bindings: clock: Add schema for QCOM IPQ apss pll Sivaprakash Murugesan
2020-05-12 19:56   ` Bjorn Andersson
2020-05-24  9:49     ` Sivaprakash Murugesan
2020-05-04  6:20 ` [PATCH V4 3/8] clk: qcom: Add ipq apss pll driver Sivaprakash Murugesan
2020-05-04  6:20 ` [PATCH V4 4/8] clk: qcom: Add DT bindings for ipq6018 apss clock controller Sivaprakash Murugesan
2020-05-04  6:20 ` [PATCH V4 5/8] clk: qcom: Add ipq " Sivaprakash Murugesan
2020-05-12 20:12   ` Bjorn Andersson [this message]
2020-05-24  9:48     ` Sivaprakash Murugesan
2020-05-04  6:20 ` [PATCH V4 6/8] dt-bindings: mailbox: Add dt-bindings for ipq6018 apcs global block Sivaprakash Murugesan
2020-05-04  6:20 ` [PATCH V4 7/8] mailbox: qcom: Add ipq6018 apcs compatible Sivaprakash Murugesan
2020-05-12 20:19   ` Bjorn Andersson
2020-05-24  9:45     ` Sivaprakash Murugesan
2020-05-04  6:20 ` [PATCH V4 8/8] arm64: dts: ipq6018: Add a53 pll and apcs clock Sivaprakash Murugesan
2020-05-12 20:24   ` Bjorn Andersson
2020-05-13  3:55     ` Sivaprakash Murugesan
2020-05-18 18:03       ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200512201233.GI2165@builder.lan \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jassisinghbrar@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sivaprak@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox