Re: [PATCH v7 3/3] power: supply: bq25150 introduce the bq25150

Andrew F. Davis
2020-05-19T14:46:48Z

On 5/19/20 10:19 AM, Dan Murphy wrote:
> +static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val)
> +{
> + int i;
> +
> + if (val > BQ2515X_ILIM_MAX || val < BQ2515X_ILIM_MIN)
> + return -EINVAL;

Clamp to these limits, not reject. Or better, modify the below loop so
it clamps to the highest or lowest value in bq2515x_ilim_lvl_values[],
then drop these #defines.

> +
> + for (i = 0; i < ARRAY_SIZE(bq2515x_ilim_lvl_values); i++) {
> + if (val == bq2515x_ilim_lvl_values[i])
> + break;
> +
> + if (val > bq2515x_ilim_lvl_values[i - 1] &&

Index out of bounds for the i = 0 case.

> + val < bq2515x_ilim_lvl_values[i]) {
> + if (val - bq2515x_ilim_lvl_values[i - 1] <
> + bq2515x_ilim_lvl_values[i] - val) {

You are still missing the case where the value is closer to the [i]
element, you check that it is between [i-1] and [i], but only chose
[i-1] when it is closer to that than [i] but equal and greater case is
missing.

Given this sets input current limits, would instead always rounding down
be the safer option?

Andrew

> + i = i - 1;
> + break;
> + }
> + }
> + }
> +
> + return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i);
> +}