Re: [PATCH v3 00/16] spi: dw: Add generic DW DMA controller support

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Thu, May 21, 2020 at 04:21:50AM +0300, Serge Semin wrote:
> Baikal-T1 SoC provides a DW DMA controller to perform low-speed peripherals
> Mem-to-Dev and Dev-to-Mem transaction. This is also applicable to the DW
> APB SSI devices embedded into the SoC. Currently the DMA-based transfers
> are supported by the DW APB SPI driver only as a middle layer code for
> Intel MID/Elkhart PCI devices. Seeing the same code can be used for normal
> platform DMAC device we introduced a set of patches to fix it within this
> series.
> 
> First of all we need to add the Tx and Rx DMA channels support into the DW
> APB SSI binding. Then there are several fixes and cleanups provided as a
> initial preparation for the Generic DMA support integration: add Tx/Rx
> finish wait methods, clear DMAC register when done or stopped, Fix native
> CS being unset, enable interrupts in accordance with DMA xfer mode,
> discard static DW DMA slave structures, discard unused void priv pointer
> and dma_width member of the dw_spi structure, provide the DMA Tx/Rx burst
> length parametrisation and make sure it's optionally set in accordance
> with the DMA max-burst capability.
> 
> In order to have the DW APB SSI MMIO driver working with DMA we need to
> initialize the paddr field with the physical base address of the DW APB SSI
> registers space. Then we unpin the Intel MID specific code from the
> generic DMA one and placed it into the spi-dw-pci.c driver, which is a
> better place for it anyway. After that the naming cleanups are performed
> since the code is going to be used for a generic DMAC device. Finally the
> Generic DMA initialization can be added to the generic version of the
> DW APB SSI IP.
> 
> Last but not least we traditionally convert the legacy plain text-based
> dt-binding file with yaml-based one and as a cherry on a cake replace
> the manually written DebugFS registers read method with a ready-to-use
> for the same purpose regset32 DebugFS interface usage.

I have given tags where I agree with content and I left disputed ones untouched
(1st patch, nevertheless, is fine for me, but I'm waiting for Feng).

So, now it seems settled in a way that I will send couple of cleanups
afterwards to avoid blocking this series to go.

Thanks for your work!

> This patchset is rebased and tested on the spi/for-next (5.7-rc5):
> base-commit: fe9fce6b2cf3 ("Merge remote-tracking branch 'spi/for-5.8' into spi-next")
> 
> Link: https://lore.kernel.org/linux-spi/20200508132943.9826-1-Sergey.Semin@baikalelectronics.ru/
> Changelog v2:
> - Rebase on top of the spi repository for-next branch.
> - Move bindings conversion patch to the tail of the series.
> - Move fixes to the head of the series.
> - Apply as many changes as possible to be applied the Generic DMA
>   functionality support is added and the spi-dw-mid is moved to the
>   spi-dw-dma driver.
> - Discard patch "spi: dw: Fix dma_slave_config used partly uninitialized"
>   since the problem has already been fixed.
> - Add new patch "spi: dw: Discard unused void priv pointer".
> - Add new patch "spi: dw: Discard dma_width member of the dw_spi structure".
>   n_bytes member of the DW SPI data can be used instead.
> - Build the DMA functionality into the DW APB SSI core if required instead
>   of creating a separate kernel module.
> - Use conditional statement instead of the ternary operator in the ref
>   clock getter.
> 
> Link: https://lore.kernel.org/linux-spi/20200515104758.6934-1-Sergey.Semin@baikalelectronics.ru/
> Changelog v3:
> - Use spi_delay_exec() method to wait for the DMA operation completion.
> - Explicitly initialize the dw_dma_slave members on stack.
> - Discard the dws->fifo_len utilization in the Tx FIFO DMA threshold
>   setting from the patch where we just add the default burst length
>   constants.
> - Use min() method to calculate the optimal burst values.
> - Add new patch which moves the spi-dw.c source file to spi-dw-core.c in
>   order to preserve the DW APB SSI core driver name.
> - Add commas in the debugfs_reg32 structure initializer and after the last
>   entry of the dw_spi_dbgfs_regs array.
> 
> Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru>
> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
> Cc: Ekaterina Skachko <Ekaterina.Skachko@baikalelectronics.ru>
> Cc: Vadim Vlasov <V.Vlasov@baikalelectronics.ru>
> Cc: Alexey Kolotnikov <Alexey.Kolotnikov@baikalelectronics.ru>
> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> Cc: Paul Burton <paulburton@kernel.org>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: linux-mips@vger.kernel.org
> Cc: linux-spi@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> 
> Serge Semin (16):
>   spi: dw: Add Tx/Rx finish wait methods to the MID DMA
>   spi: dw: Enable interrupts in accordance with DMA xfer mode
>   spi: dw: Discard static DW DMA slave structures
>   spi: dw: Discard unused void priv pointer
>   spi: dw: Discard dma_width member of the dw_spi structure
>   spi: dw: Parameterize the DMA Rx/Tx burst length
>   spi: dw: Use DMA max burst to set the request thresholds
>   spi: dw: Fix Rx-only DMA transfers
>   spi: dw: Add core suffix to the DW APB SSI core source file
>   spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
>   spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
>   spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
>   spi: dw: Cleanup generic DW DMA code namings
>   spi: dw: Add DMA support to the DW SPI MMIO driver
>   spi: dw: Use regset32 DebugFS method to create regdump file
>   dt-bindings: spi: Convert DW SPI binding to DT schema
> 
>  .../bindings/spi/snps,dw-apb-ssi.txt          |  44 ---
>  .../bindings/spi/snps,dw-apb-ssi.yaml         | 127 ++++++++
>  .../devicetree/bindings/spi/spi-dw.txt        |  24 --
>  drivers/spi/Kconfig                           |  15 +-
>  drivers/spi/Makefile                          |   5 +-
>  drivers/spi/{spi-dw.c => spi-dw-core.c}       |  88 ++----
>  drivers/spi/{spi-dw-mid.c => spi-dw-dma.c}    | 276 +++++++++++-------
>  drivers/spi/spi-dw-mmio.c                     |   4 +
>  drivers/spi/spi-dw-pci.c                      |  50 +++-
>  drivers/spi/spi-dw.h                          |  33 ++-
>  10 files changed, 407 insertions(+), 259 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
>  create mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
>  delete mode 100644 Documentation/devicetree/bindings/spi/spi-dw.txt
>  rename drivers/spi/{spi-dw.c => spi-dw-core.c} (82%)
>  rename drivers/spi/{spi-dw-mid.c => spi-dw-dma.c} (53%)
> 
> -- 
> 2.25.1
> 

-- 
With Best Regards,
Andy Shevchenko