From: Dan Murphy <dmurphy@ti.com>
To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <perex@perex.cz>,
<tiwai@suse.com>
Cc: <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>,
kbuild test robot <lkp@intel.com>
Subject: [PATCH] ASoC: tlv320adcx140: Fix warnings when using W=1
Date: Tue, 26 May 2020 12:52:47 -0500 [thread overview]
Message-ID: <20200526175247.15309-1-dmurphy@ti.com> (raw)
Fix the warnings when using the W=1 compiler flag.
sound/soc/codecs/tlv320adcx140.c: In function ‘adcx140_reset’:
sound/soc/codecs/tlv320adcx140.c:570:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
570 | int ret = 0;
| ^~~
This was set but only used in case where the reset GPIO is not defined.
Have the function return the value of ret.
sound/soc/codecs/tlv320adcx140.c: In function ‘adcx140_codec_probe’:
sound/soc/codecs/tlv320adcx140.c:778:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
778 | if (bias_source < ADCX140_MIC_BIAS_VAL_VREF ||
| ^
sound/soc/codecs/tlv320adcx140.c:789:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
789 | if (vref_source < ADCX140_MIC_BIAS_VREF_275V ||
This condition will not occur since if the dt property is not set then
the *_source variable is set to the default value. So there is no way
that *_source can be less then 0. Which is what each #define is set to.
The code just needs to make sure that the dt property is not out of the
upper bounds.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
sound/soc/codecs/tlv320adcx140.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c
index 472d759ba8a3..2fe0df3b7550 100644
--- a/sound/soc/codecs/tlv320adcx140.c
+++ b/sound/soc/codecs/tlv320adcx140.c
@@ -582,7 +582,7 @@ static int adcx140_reset(struct adcx140_priv *adcx140)
/* 8.4.2: wait >= 10 ms after entering sleep mode. */
usleep_range(10000, 100000);
- return 0;
+ return ret;
}
static int adcx140_hw_params(struct snd_pcm_substream *substream,
@@ -772,8 +772,7 @@ static int adcx140_codec_probe(struct snd_soc_component *component)
if (ret)
bias_source = ADCX140_MIC_BIAS_VAL_VREF;
- if (bias_source < ADCX140_MIC_BIAS_VAL_VREF ||
- bias_source > ADCX140_MIC_BIAS_VAL_AVDD) {
+ if (bias_source > ADCX140_MIC_BIAS_VAL_AVDD) {
dev_err(adcx140->dev, "Mic Bias source value is invalid\n");
return -EINVAL;
}
@@ -783,8 +782,7 @@ static int adcx140_codec_probe(struct snd_soc_component *component)
if (ret)
vref_source = ADCX140_MIC_BIAS_VREF_275V;
- if (vref_source < ADCX140_MIC_BIAS_VREF_275V ||
- vref_source > ADCX140_MIC_BIAS_VREF_1375V) {
+ if (vref_source > ADCX140_MIC_BIAS_VREF_1375V) {
dev_err(adcx140->dev, "Mic Bias source value is invalid\n");
return -EINVAL;
}
--
2.26.2
next reply other threads:[~2020-05-26 17:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-26 17:52 Dan Murphy [this message]
2020-05-27 14:58 ` [PATCH] ASoC: tlv320adcx140: Fix warnings when using W=1 Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200526175247.15309-1-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lkp@intel.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox