Re: [PATCH v8 1/3] dt-bindings: phy: Add DT bindings for Xilinx ZynqMP PSGTR PHY

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

On Tue, May 26, 2020 at 12:32:01PM -0600, Rob Herring wrote:
> On Wed, 13 May 2020 20:22:37 +0300, Laurent Pinchart wrote:
> > From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
> > 
> > Add DT bindings for the Xilinx ZynqMP PHY. ZynqMP SoCs have a High Speed
> > Processing System Gigabit Transceiver which provides PHY capabilities to
> > USB, SATA, PCIE, Display Port and Ehernet SGMII controllers.
> > 
> > Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> > Changes since v7:
> > 
> > - Switch to GPL-2.0-only OR BSD-2-Clause
> > 
> > Changes since v6:
> > 
> > - Fixed specification of compatible-dependent xlnx,tx-termination-fix
> >   property
> > - Dropped status property from example
> > - Use 4 spaces to indent example
> > 
> > Changes since v5:
> > 
> > - Document clocks and clock-names properties
> > - Document resets and reset-names properties
> > - Replace subnodes with an additional entry in the PHY cells
> > - Drop lane frequency PHY cell, replaced by reference clock phandle
> > - Convert bindings to YAML
> > - Reword the subject line
> > - Drop Rob's R-b as the bindings have significantly changed
> > - Drop resets and reset-names properties
> > ---
> >  .../bindings/phy/xlnx,zynqmp-psgtr.yaml       | 105 ++++++++++++++++++
> >  include/dt-bindings/phy/phy.h                 |   1 +
> >  2 files changed, 106 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
> 
> Reviewed-by: Rob Herring <robh@kernel.org>

Thank you Rob.

Kishon, now that the bindings have been acked, could you please take the
series in your tree (which I assume to tbe
https://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git/) ?
Is it too late for v5.8 ?

-- 
Regards,

Laurent Pinchart