From: Roger Quadros <rogerq@ti.com>
To: <kishon@ti.com>, <robh+dt@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
Roger Quadros <rogerq@ti.com>
Subject: [PATCHv2 1/3] dt-binding: phy: convert ti,omap-usb2 to YAML
Date: Tue, 2 Jun 2020 14:46:04 +0300 [thread overview]
Message-ID: <20200602114606.32045-2-rogerq@ti.com> (raw)
In-Reply-To: <20200602114606.32045-1-rogerq@ti.com>
Move ti,omap-usb2 to its own YAML schema.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
.../devicetree/bindings/phy/ti,omap-usb2.yaml | 69 +++++++++++++++++++
.../devicetree/bindings/phy/ti-phy.txt | 37 ----------
2 files changed, 69 insertions(+), 37 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
new file mode 100644
index 000000000000..2bbea8d2bcb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,omap-usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP USB2 PHY
+
+maintainers:
+ - Kishon Vijay Abraham I <kishon@ti.com>
+ - Roger Quadros <rogerq@ti.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - "ti,dra7x-usb2"
+ - "ti,dra7x-usb2-phy2"
+ - "ti,am654-usb2"
+ - enum:
+ - "ti,omap-usb2"
+
+ reg:
+ maxItems: 1
+
+ '#phy-cells':
+ const: 0
+
+ clocks:
+ minItems: 1
+ items:
+ - description: wakeup clock
+ - description: reference clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: wkupclk
+ - const: refclk
+
+ syscon-phy-power:
+ $ref: /schemas/types.yaml#definitions/phandle-array
+ description:
+ phandle/offset pair. Phandle to the system control module and
+ register offset to power on/off the PHY.
+
+ ctrl-module:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ (deprecated) phandle of the control module used by PHY driver
+ to power on the PHY. Use syscon-phy-power instead.
+
+required:
+ - compatible
+ - reg
+ - '#phy-cells'
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ usb0_phy: phy@4100000 {
+ compatible = "ti,am654-usb2", "ti,omap-usb2";
+ reg = <0x0 0x4100000 0x0 0x54>;
+ syscon-phy-power = <&scm_conf 0x4000>;
+ clocks = <&k3_clks 151 0>, <&k3_clks 151 1>;
+ clock-names = "wkupclk", "refclk";
+ #phy-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 8f93c3b694a7..60c9d0ac75e6 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -27,43 +27,6 @@ omap_control_usb: omap-control-usb@4a002300 {
reg-names = "otghs_control";
};
-OMAP USB2 PHY
-
-Required properties:
- - compatible: Should be "ti,omap-usb2"
- Should be "ti,dra7x-usb2" for the 1st instance of USB2 PHY on
- DRA7x
- Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
- in DRA7x
- Should be "ti,am654-usb2" for the USB2 PHYs on AM654.
- - reg : Address and length of the register set for the device.
- - #phy-cells: determine the number of cells that should be given in the
- phandle while referencing this phy.
- - clocks: a list of phandles and clock-specifier pairs, one for each entry in
- clock-names.
- - clock-names: should include:
- * "wkupclk" - wakeup clock.
- * "refclk" - reference clock (optional).
-
-Deprecated properties:
- - ctrl-module : phandle of the control module used by PHY driver to power on
- the PHY.
-
-Recommended properies:
-- syscon-phy-power : phandle/offset pair. Phandle to the system control
- module and the register offset to power on/off the PHY.
-
-This is usually a subnode of ocp2scp to which it is connected.
-
-usb2phy@4a0ad080 {
- compatible = "ti,omap-usb2";
- reg = <0x4a0ad080 0x58>;
- ctrl-module = <&omap_control_usb>;
- #phy-cells = <0>;
- clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
- clock-names = "wkupclk", "refclk";
-};
-
TI PIPE3 PHY
Required properties:
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next prev parent reply other threads:[~2020-06-02 11:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-02 11:46 [PATCHv2 0/3] phy: omap-usb2: add quirk to disable charger detection Roger Quadros
2020-06-02 11:46 ` Roger Quadros [this message]
2020-06-09 23:04 ` [PATCHv2 1/3] dt-binding: phy: convert ti,omap-usb2 to YAML Rob Herring
2020-06-02 11:46 ` [PATCHv2 2/3] dt-binding: phy: ti,omap-usb2: Add quirk to disable charger detection Roger Quadros
2020-06-09 23:06 ` Rob Herring
2020-06-02 11:46 ` [PATCHv2 3/3] phy: omap-usb2-phy: disable PHY charger detect Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200602114606.32045-2-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox