Re: [PATCH v4] EDAC/ghes: Setup DIMM label from DMI and use it in error reports

[Borislav Petkov <bp@alien8.de>]

On Thu, May 28, 2020 at 12:13:06PM +0200, Robert Richter wrote:
> The ghes driver reports errors with 'unknown label' even if the actual
> DIMM label is known, e.g.:
> 
>  EDAC MC0: 1 CE Single-bit ECC on unknown label (node:0 card:0
>    module:0 rank:1 bank:0 col:13 bit_pos:16 DIMM location:N0 DIMM_A0
>    page:0x966a9b3 offset:0x0 grain:1 syndrome:0x0 - APEI location:
>    node:0 card:0 module:0 rank:1 bank:0 col:13 bit_pos:16 DIMM
>    location:N0 DIMM_A0 status(0x0000000000000400): Storage error in
>    DRAM memory)
> 
> Fix this by using struct dimm_info's label string in error reports:
> 
>  EDAC MC0: 1 CE Single-bit ECC on N0 DIMM_A0 (node:0 card:0 module:0
>    rank:1 bank:515 col:14 bit_pos:16 DIMM location:N0 DIMM_A0
>    page:0x99223d8 offset:0x0 grain:1 syndrome:0x0 - APEI location:
>    node:0 card:0 module:0 rank:1 bank:515 col:14 bit_pos:16 DIMM
>    location:N0 DIMM_A0 status(0x0000000000000400): Storage error in
>    DRAM memory)
> 
> The labels are initialized by reading the bank and device strings from
> DMI. Now, the label information can also read from sysfs. E.g. a
> ThunderX2 system will show the following:
> 
>  /sys/devices/system/edac/mc/mc0/dimm0/dimm_label:N0 DIMM_A0
>  /sys/devices/system/edac/mc/mc0/dimm1/dimm_label:N0 DIMM_B0
>  /sys/devices/system/edac/mc/mc0/dimm2/dimm_label:N0 DIMM_C0
>  /sys/devices/system/edac/mc/mc0/dimm3/dimm_label:N0 DIMM_D0
>  /sys/devices/system/edac/mc/mc0/dimm4/dimm_label:N0 DIMM_E0
>  /sys/devices/system/edac/mc/mc0/dimm5/dimm_label:N0 DIMM_F0
>  /sys/devices/system/edac/mc/mc0/dimm6/dimm_label:N0 DIMM_G0
>  /sys/devices/system/edac/mc/mc0/dimm7/dimm_label:N0 DIMM_H0
>  /sys/devices/system/edac/mc/mc0/dimm8/dimm_label:N1 DIMM_I0
>  /sys/devices/system/edac/mc/mc0/dimm9/dimm_label:N1 DIMM_J0
>  /sys/devices/system/edac/mc/mc0/dimm10/dimm_label:N1 DIMM_K0
>  /sys/devices/system/edac/mc/mc0/dimm11/dimm_label:N1 DIMM_L0
>  /sys/devices/system/edac/mc/mc0/dimm12/dimm_label:N1 DIMM_M0
>  /sys/devices/system/edac/mc/mc0/dimm13/dimm_label:N1 DIMM_N0
>  /sys/devices/system/edac/mc/mc0/dimm14/dimm_label:N1 DIMM_O0
>  /sys/devices/system/edac/mc/mc0/dimm15/dimm_label:N1 DIMM_P0
> 
> Since dimm_labels can be rewritten, that label will be used in a later
> error report:
> 
>  # echo foobar >/sys/devices/system/edac/mc/mc0/dimm0/dimm_label
>  # # some error injection here
>  # dmesg | grep foobar
>  [ 751.383533] EDAC MC0: 1 CE Single-bit ECC on foobar (node:0 card:0
>  module:0 rank:1 bank:259 col:3 bit_pos:16 DIMM location:N0 DIMM_A0
>  page:0x8c8dc74 offset:0x0 grain:1 syndrome:0x0 - APEI location:
>  node:0 card:0 module:0 rank:1 bank:259 col:3 bit_pos:16 DIMM
>  location:N0 DIMM_A0 status(0x0000000000000400): Storage error in DRAM
>  memory)
> 
> Signed-off-by: Robert Richter <rrichter@marvell.com>
> ---
> v4:
> 
>  * dimm->label: Only update dimm->label in if bank/device is found in
>    the SMBIOS table, this keeps current behavior for machines that do
>    not provide this information.
> 
>  * e->location: Keep current behavior how e->location is written.
> 
>  * e->label: Use dimm->label if a DIMM was found by its handle and
>    "unknown memory" otherwise. This aligns with the edac_mc
>    implementation.
> 
> Signed-off-by: Robert Richter <rrichter@marvell.com>
> ---
>  drivers/edac/ghes_edac.c | 37 ++++++++++++++++++++++++++-----------
>  1 file changed, 26 insertions(+), 11 deletions(-)

Yap, looks good. I'll queue it after the merge window.

Thx.

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette