Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths

[Krzysztof Kozlowski <krzk@kernel.org>]

On Mon, Jun 15, 2020 at 03:56:01PM +0300, Vladimir Oltean wrote:
> On Mon, 15 Jun 2020 at 15:35, Mark Brown <broonie@kernel.org> wrote:
> >
> 
> >
> > Indeed.  The upshot of all this is that the interrupt needs to be freed
> > not disabled before the clocks are disabled, or some other mechanism
> > needs to be used to ensure that the interrupt handler won't attempt to
> > access the hardware when it shouldn't.  As Vladimir says there are
> > serious issues using devm for interrupt handlers (or anything else that
> > might cause code to be run) due to problems like this.
> 
> And the down-shot is that whatever is done in dspi_remove (free_irq)
> also needs to be done in dspi_suspend, but with extra care in
> dspi_resume not only to request the irq again, but also to flush the
> module's FIFOs and clear interrupts, because there might have been
> nasty stuff uncaught during sleep:
> 
>     regmap_update_bits(dspi->regmap, SPI_MCR,
>                SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF,
>                SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF);
>     regmap_write(dspi->regmap, SPI_SR, SPI_SR_CLEAR);
> 
> So it's pretty messy.

It is a slightly different bug which so this patch should have a follow
up.

Best regards,
Krzysztof