From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [RFC PATCH v1 0/2] rk3318 A95X Z2 board
Date: Sat, 20 Jun 2020 15:46:57 +0200 [thread overview]
Message-ID: <20200620134659.4592-1-jbx6244@gmail.com> (raw)
status: EXPERIMENTAL
Use on your own risk.
What works:
uart2
mmc
emmc
sd card
usb2
What doesn't work:
vop
hdmi
ethernet
Not tested:
adc key
av
bt
ir
spdif
wifi
No support in mainline:
usb3
front display
Problems:
U-boot only starts on emmc, then loads kernel from sd card.
Need pd_ignore_unused and clk_ignore_unused in command line
to prevent a crash. Missing power domains?
Hdmi hotplug detects DVI modes, but marks them all BAD.
A fixed display mode in the command line also gives no penguins
on the screen.
Etc.
Johan Jonker (2):
dt-bindings: arm: rockchip: add A95X Z2 description
arm64: dts: rockchip: add rk3318 A95X Z2 board
.../devicetree/bindings/arm/rockchip.yaml | 5 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts | 417 +++++++++++++++++++++
3 files changed, 423 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
--
2.11.0
next reply other threads:[~2020-06-20 13:47 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-20 13:46 Johan Jonker [this message]
2020-06-20 13:46 ` [RFC PATCH v1 1/2] dt-bindings: arm: rockchip: add A95X Z2 description Johan Jonker
2020-07-15 19:29 ` Rob Herring
2020-07-16 12:05 ` Johan Jonker
2020-07-16 13:34 ` Robin Murphy
2020-07-16 16:11 ` Johan Jonker
2020-07-16 19:18 ` Robin Murphy
2020-06-20 13:46 ` [RFC PATCH v1 2/2] arm64: dts: rockchip: add rk3318 A95X Z2 board Johan Jonker
2020-06-22 8:01 ` [RFC PATCH v1 0/2] " Johan Jonker
2020-06-25 8:38 ` Johan Jonker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200620134659.4592-1-jbx6244@gmail.com \
--to=jbx6244@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox