From: Mike Rapoport <rppt@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
Arnd Bergmann <arnd@arndb.de>, Guenter Roeck <linux@roeck-us.net>,
Linus Torvalds <torvalds@linux-foundation.org>,
Mike Rapoport <rppt@kernel.org>,
Mike Rapoport <rppt@linux.ibm.com>
Subject: [PATCH 2/8] cpufreq: remove unicore32 driver
Date: Tue, 23 Jun 2020 09:57:38 +0300 [thread overview]
Message-ID: <20200623065744.18393-3-rppt@kernel.org> (raw)
In-Reply-To: <20200623065744.18393-1-rppt@kernel.org>
From: Mike Rapoport <rppt@linux.ibm.com>
The unicore32 port is removed from the kernel.
There is no point to keep stale cpufreq driver for this architecture.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
---
drivers/cpufreq/Makefile | 1 -
drivers/cpufreq/unicore2-cpufreq.c | 76 ------------------------------
2 files changed, 77 deletions(-)
delete mode 100644 drivers/cpufreq/unicore2-cpufreq.c
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index f6670c4abbb0..089938ead681 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -108,4 +108,3 @@ obj-$(CONFIG_LOONGSON1_CPUFREQ) += loongson1-cpufreq.o
obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o
obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o
obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o
-obj-$(CONFIG_UNICORE32) += unicore2-cpufreq.o
diff --git a/drivers/cpufreq/unicore2-cpufreq.c b/drivers/cpufreq/unicore2-cpufreq.c
deleted file mode 100644
index 98d392196df2..000000000000
--- a/drivers/cpufreq/unicore2-cpufreq.c
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * clock scaling for the UniCore-II
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-
-#include <mach/hardware.h>
-
-static struct cpufreq_driver ucv2_driver;
-
-/* make sure that only the "userspace" governor is run
- * -- anything else wouldn't make sense on this platform, anyway.
- */
-static int ucv2_verify_speed(struct cpufreq_policy_data *policy)
-{
- if (policy->cpu)
- return -EINVAL;
-
- cpufreq_verify_within_cpu_limits(policy);
- return 0;
-}
-
-static int ucv2_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_freqs freqs;
- int ret;
-
- freqs.old = policy->cur;
- freqs.new = target_freq;
-
- cpufreq_freq_transition_begin(policy, &freqs);
- ret = clk_set_rate(policy->clk, target_freq * 1000);
- cpufreq_freq_transition_end(policy, &freqs, ret);
-
- return ret;
-}
-
-static int __init ucv2_cpu_init(struct cpufreq_policy *policy)
-{
- if (policy->cpu != 0)
- return -EINVAL;
-
- policy->min = policy->cpuinfo.min_freq = 250000;
- policy->max = policy->cpuinfo.max_freq = 1000000;
- policy->clk = clk_get(NULL, "MAIN_CLK");
- return PTR_ERR_OR_ZERO(policy->clk);
-}
-
-static struct cpufreq_driver ucv2_driver = {
- .flags = CPUFREQ_STICKY | CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
- .verify = ucv2_verify_speed,
- .target = ucv2_target,
- .get = cpufreq_generic_get,
- .init = ucv2_cpu_init,
- .name = "UniCore-II",
-};
-
-static int __init ucv2_cpufreq_init(void)
-{
- return cpufreq_register_driver(&ucv2_driver);
-}
-
-arch_initcall(ucv2_cpufreq_init);
--
2.26.2
next prev parent reply other threads:[~2020-06-23 6:58 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-23 6:57 [PATCH 0/8] remove unicore32 support Mike Rapoport
2020-06-23 6:57 ` [PATCH 1/8] arch: remove unicore32 port Mike Rapoport
2020-06-23 6:57 ` Mike Rapoport [this message]
2020-06-23 6:57 ` [PATCH 3/8] i2c/buses: remove i2c-puv3 driver Mike Rapoport
2020-06-23 6:57 ` [PATCH 4/8] input: i8042: remove support for 8042-unicore32io Mike Rapoport
2020-06-23 6:57 ` [PATCH 5/8] pwm: remove pwm-puv3 driver Mike Rapoport
2020-06-23 6:57 ` [PATCH 6/8] video: fbdev: remove fb-puv3 driver Mike Rapoport
2020-06-23 6:57 ` [PATCH 7/8] rtc: " Mike Rapoport
2020-06-23 6:57 ` [PATCH 8/8] MAINTAINERS: remove "PKUNITY SOC DRIVERS" entry Mike Rapoport
2020-06-23 7:29 ` [PATCH 0/8] remove unicore32 support Arnd Bergmann
2020-06-23 13:27 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200623065744.18393-3-rppt@kernel.org \
--to=rppt@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=rppt@linux.ibm.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox